Houses for cats do it yourself - 150+ (photo) Make step by step

House for the cat do it yourself: how to make step-by-step? 150+ (photo) of wood, cardboard, boxes, with clawed

House for the cat do it yourself: how to make step-by-step? 150+ (photo) of wood, cardboard, boxes, with clawed

When a cat appears in the house, you need to highlight your place for it. Many owners do not bypass a simple bed from the store. They wish to make an original lodge with their own hands. This task may seem complex. But if you figure it out in all parts of production, the structure is made without difficulty! You can also build a house suitable for the interior style. And in ordinary stores it is difficult to choose this. About everything in more detail further in the article.

The contents of this article:

How interesting, stylish and originally decorate the room for the new 2020 rats with your own hands (230 + photos): incredibly beautiful interior things in every homeSee also: How interesting, stylish and originally decorate the room for the new 2020 rats with your own hands (230 + photos): incredibly beautiful interior things in every home

General recommendations

There are a number of rules that will help prepare for work on the arrangement of a hut for a cat.

Small house for your favorite

Small house for your favorite

To begin with, learning the most basic:

  • Before embarking on the building for an animal, think what materials you will use. It is better to use fabric from natural fibers and natural wood. These materials are the safest for cats. But in any store they cost expensive. And Chinese counterparts, as a rule, consist of synthetic and plastics.
  • You need to clearly understand what kind of house you want to make. To do this, draw it in advance on a sheet of paper. Such a sketch will help not forget anything. Also, you will correctly plan the purchase of materials, prepare a screwdriver.
  • This is an interesting lesson for parents with children. After all, participation in the creative process always brings joy.
Use only high-quality materials.

Use only high-quality materials.

How to make a fireplace from cardboard with your own hands (+90 photos): Step-by-step instructions and master classesSee also: How to make a fireplace from cardboard with your own hands (+90 photos): Step-by-step instructions and master classes

Dominics for cats Step by step: Main recipes

Make a house for a cat with your own hands more fun together with children. Just give preference to safe materials. So, the simplest and cheap option for the agricultural chaolash is the following:

  • You need to take a large box of corrugated cardboard. It is better that the box had parameters at least 35 by 50 cm in width and up to 50 cm in height.
  • Now you need to prepare a scissors: scissors, glue, stationery knife, fine sandpaper, tape, pencil, colored paper, upholstery and more.
  • For the internal frame (litter on the floor), you can use foam rubber. But if it is not available, an unnecessary blouse or a piece of old plaid is suitable. For the exterior trim, the house can be applied colored paper. But it is more important to use the booklined cloth or fur.
  • Now proceed to the preparation of the box itself. To do this, we remove the stickers from it, we are lining the scotch of the place where there are cracks, cut the bursavire, grinding sandpaper roughness.
The creative process brings joy not only to children

The creative process brings joy not only to children

  • On the end of the box draw a hole. To do this, we apply a saucer to it with a diameter of at least 20 cm and supply it around the edges. Then cut the hole by the stationery knife. Gently grind edges with sandpaper.
  • Once again we cross all the joints with scotch or glue. The house should be solid, so that the cat in it was cozy and calm. Dry the product before starting the exterior finish.
  • Now you have a house with colored paper or textiles. For the second variant, silicone quick-drying glue is suitable. In this case, it is impossible to use a furniture stapler, as the cat can be born about the clips from the inside.
  • Under the size of the floor in the house Sew a small pillow of foam rubber and upholstery fabric.
Make easier simple

Make easier simple

Now the house is ready for operation. And in this cozy nest can be launched a pet. You can add it with glued toys hanging threads, sequins.

How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)See also: How to make roses from paper with your own hands: Step-by-step instructions for beginners (+190 photos)

Popular options

The building for the cat may have a non-standard form. It is possible to make it from the remedies. It can also not be scratching. Consider several such options:

  • Wigwam . The design of metal rods is made in the shape of a tent. Then it is tightened from all sides (except one) cloth. For the floor of such a house, the foam rubber and the litter are stacked.
Vigvam itself is quite an interesting object

Vigvam itself is quite an interesting object

  • House-Puffy . Standard square baffy usually consists of wooden or MDF design. Therefore, we remove the fabric from the bottom of the pouf and the jigsaw cut the hole. Then the wooden part can be covered with latex paint, and inside put a soft lining.
  • House-hammock . Any cat is interesting to new places. Make a hammock for her rest is very simple. To do this, you can take advantage of: a small coffee table, chair or chairs. But these furniture items must have 4 legs. So, at the level between the floor and the countertop / seat, the canvas is stretched. According to his sides, two tissue tapes for each should be sewn. Then the cloth is attached to the legs by means of ties. And vua-la!
Cat home-hammock

Cat home-hammock

  • House-triangle . This is the easiest view of a hut for a pet. To make it you will need 3 small pieces of Ozbov Plate. They can be cut from a thin board, 6 ml thick. Slices should be equal size and rectangular shape. Then the 1st piece put on the floor, and on top of it we make a dome from the other two. Fix parts with each other with nails or screws. Additionally, metal triangles can be used. With the help of glue-gun or furniture stapler we make a house with an outer face. Inside the laying soft lining.
  • House-shelf . From undergraduated materials (OSB plates, boards, laminate or chipboard) can be prepared by the shelves of various levels. But its main task will be - to become a place for the rest of the cat. So, it will be necessary to decide the resulting element of furniture with a cloth and put it on the floor.
Wall-mounted shelf

Wall-mounted shelf

Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)See also: Crafts for the new year 2020 do it yourself (120+ photos) - surprise your loved ones with your fantasy (+ reviews)

Dominics with Kogtetchka

Each cat must sharpen claws. If the pet is home and attend the street regularly he does not have the opportunity, then you will have to do it at home. Without the procedure for the stratification of claws, they will have to cohere up the owner.

And if there are no brakes in the house, the pet will begin to sharpen claws about the furniture.

Therefore, it is better to make a cat's house with a cog-brake, which will fully perform the assigned function.

Do not forget about the brake

Do not forget about the brake

Materials

First decide on the place of construction. Then you need to measure the designated "angle" in height and width. Now prepare materials, the most convenient for the sharpening claws of the animal. It:

  • carpet;
  • tapestry;
  • jute rope;
  • fur;
  • tree.
Good version with clawing

Good version with clawing

Carpet - it is quite durable and soft material. On him the cat will be convenient to sit and also comfortably accurate about it claws.

In addition, you will need:

  • plywood sheets;
  • wooden bars;
  • Plastic pipes as reference pillars;
  • self-tapping screw;
  • corners;
  • screwdriver;
  • Lobzik.
Choose a variety not only to taste, but by convenience

Choose a variety not only to taste, but by convenience

But the specified tools may not be found in the house. Therefore, their presence is worth taking care of in advance.

What and where to buy?

To build a hut with a kogtechka for an animal, buy a whole plywood sheet at once - 1.5 per 1.5 cm. Then cut it into pieces: 0.50 by 0.75 cm.

For support (post), you can apply the usual bar, which will need to be divided into several parts. Bar Choose long to 2, 5 m.

First make outline before making

First make outline before making

Plywood sheets are desirable to choose with a thickness of at least 10 mm. Since the cat will often jump on them in the future. And this material should be strong.

Council

Do not buy the most expensive carpet. Prefer the cheap option. You can also ask the seller to sell you trimming this material.

Jute rope will be found in every construction store or on the market. The difficulty lies in the fact that it is sold in bulk . You will have to buy a whole motility or search for a shop where they sell the rope in the midst. But the price of cutting is an order of magnitude higher. Rope take at least 1 cm in thickness.

Budget and convenient

Budget and convenient

Under the structure buy safety elements of fastening: corners and triangles for better fixation of structures.

Manufacturing process

When the design of the hut is over, and all the materials are at hand, you can start work. The basic frame may be single, two- and even three-core. The number of platforms also depends on the number of cats in the house. So, if two pets live in the apartment, then for each of them there should be their own seat.

When the bracket is replaced by a house

When the bracket is replaced by a house

So, proceed:

  • To the base of the plywood is attached to a wooden bar.
  • You can put on it a plastic tube suitable in size (so that the pipe fits tightly to the walls of the bar and did not twist).
  • If we make several platforms, at some distance from each other on a single foundation fix another 1-2 bars.
  • Each of them is attached to its platform (at different heights). Fix them on top of self-discharge and metal corners on the sides.
Make design easy for carrying

Make design easy for carrying

  • The first shelf must be fixed not only on its bar, but also to be connected to the second. Therefore, a hole for the second timber is prepared in the plywood in advance. He will have to enter the board. The second shelf is attached to the third in the same way.
  • Now you can proceed to the frame of the plywood surfaces of the carpet. Here you can use the stapler or apply ordinary nails and the hammer. If you place a house with ordinary cloth, then it will soon be replaced by a building. Most likely the animal wants to sharpen claws about the fabric too.
  • All pillars from the beginning and fully interfere with the rope. Try to make their rings firmly fit to each other.

Now the structure of the brake for your favorite is ready! Additionally you can decorate it with a colored felt, threads with buttons, sparkles, foil.

How to make beautiful balls for the new year 2019 do it yourself? Interesting and volumetric crafts (115+ photos). 9 step-by-step master classesSee also: How to make beautiful balls for the new year 2019 do it yourself? Interesting and volumetric crafts (115+ photos). 9 step-by-step master classes

Variants of Kogttechochki

In addition to the most common brackets for cats, it is possible to make simple but original analogues. So, it is permissible to make a brake in the form of a picture. To do this, you will need a simple piece of plywood (rectangular shape) and carpet.

When a lot of space, you can afford to put a big house

When a lot of space, you can afford to put a big house

On the board, with the help of nails and hammer, carpet is recorded. Fabric angles must be hidden on the back. That and the mini-hanger is fixed. Then the finished picture hang on the wall in the corridor or room. It should hang at the level of homemade pets. Here the cat's growth in the withers is meant, and not from the floor to the tips of his ears.

Video: How to build a house for a cat with your own hands?

How to make decorations on paper windows with your own hands? (150+ photos). We meet the new 2018 Dogs beautifullySee also: How to make decorations on paper windows with your own hands? (150+ photos). We meet the new 2018 Dogs beautifully

findings

Many masters such a process will deliver only pleasure. And about the fact that the house may not work - this is also not scary. But he will be made with love and personally.

Gift with your own hands? What easy and quickly can be done? 12 excellent options for all occasionsSee also: Gift with your own hands? What easy and quickly can be done? 12 excellent options for all occasions

Photo Gallery (more than 150 photos)

8.6. Total Score.

Creating a full-fledged house for cats is a big field for creative ideas. Imagine which is not so difficult. The main thing is to take into account important rules and acquire the necessary tools and materials. After reading the information, please leave your assessments with argumentation in the comments. They will be useful for other readers. Your opinion is very important for us. Thank you for your participation. We appreciate each of your feedback and time spent.

The relevance of information

9.5.

Accuracy of information

8.5.

pros

  • creative work in pleasure;
  • The possibility of incarnation of the most extraordinary ideas. Creating original cats for cats that do not meet in stores;
  • Using natural materials. You will know what the house is for your pet consists of, as they buy all the materials on their own. And such a housing is guaranteed will be safe;
  • Matching the interior. Choose the color of the fabric is based on the overall room environment.
  • Compliance with dimensions. If there is a free angle in the room, then it can be completely "fill out" by high-quality braketaching of its own production

Minuses

  • Loss of time. To build a hut or brake for an animal you will need not one hour. First you have to do the drawing, then visit the construction store. And the process of work for a novice wizard can take half a day;
  • There is a risk that the construction will be harvested, uneven or uncomfortable for a cat.
Add your review  |  Reviews and comments

The dwelling for pets is not only comfortable furniture, but also the subject of the interior of your apartment or at home. That is why when you take to make a cat house with your own hands, highlights that require compliance - the convenience and appearance of the future object. In this material we will present to your attention several instructions for the manufacture of various cat dwellings, and tell me how to make them yourself.

House for the cat do it yourself

House for the cat do it yourself

Houses for the cat do it yourself: step-by-step instructions

So, now, when you know about the topic of the article, you can proceed to a detailed consideration of instructions for creating comfortable houses for cats.

Instruction number 1. Multifunctional house for a cat with clawed

Step number 1. Assembling the necessary materials

So, that your pet has become a happy owner of the same house where you can see in the picture at the top, you need to have a "hand" owner, if you wish several helpers, as well as building materials.

So, first of all, we need a fibreboard of the organic plate, which will play the role of the base for our future house, the size of which will be 40 per 122 centimeters. Next, for the roof of our cat housing, you need to stockproof slab, the size of which will be 44 to 61 centimeters.

Chopping plate

Chopping plate

For the walls of the house, we also need a plate chipboard, the value of which will be 55 per 44 centimeters. To equip the struts for the walls of the house, you also need to prepare 7 speechs with the following parameters: 3 per 4 and by 37 centimeters. Next, it is necessary to find a plastic tube, the diameter of which will be 11 centimeters, and the length is 60 centimeters. To give a sustainability house, you also need to prepare two strands of the average width. In addition, we will need to collect materials and a bed for a house that will be presented:

  • slab chip 44 to 40 centimeters;
  • stove fiber 44 to 30 centimeters;
  • Porolone fabric size 44 to 30 centimeters.
Porolon

Porolon

Now it remains only to collect materials for performing brates:

  • Thin rope or a rope twisted from cotton fabric, 110 millimeters thick and a length of 15 meters for the full height of vertical brates;
  • In addition, you need to prepare a rope for brates, located in the inclined position relative to the house;
  • Also need a board, 18 per 41 centimeter.

Of the additional materials for finishing, as well as construction tools, you need to get:

  • artificial fur, carpet, leatherette or other fabric for finishing a house;
  • saw and jigsaw;
  • sandpaper grout paper;
  • knife;
  • scissors;
  • drill;
  • construction stapler;
  • screwdriver;
  • adhesive pistol or glue and separately thin brush;
  • centimeter tape;
  • a piece of chalk.
Carpet for finishing a house

Carpet for finishing a house

Step number 2. Drink the elements of the future cat dwelling

So, first of all, it is necessary to cut out of the tree plates available with you, with the help of the rectangular items, which will then become:

  • base of the house;
  • laying;
  • walls, etc.

The value of these parts is indicated in the first step in which we collected the necessary materials, however, provided that you do not exactly the same house, but similar, and bought a plate much more or smaller, you can change its parameters, paying attention only On compliance with proportions.

Provided that the dimensions are preserved in original form, you will need to do the following: take rectangular parts prepared for creating walls, and draw truncated partially on them, the radius of each of which will be 27 centimeters, just as shown in the picture .

Truncated circle

Truncated circle

At the same time, one of the walls of our house will be untouched, while the second should be:

  • decorated with windows;
  • Equipped with an entrance inside the cat room.

If you want to make an emphasis on the fact that the "box is manufactured by you will live a pet, windows and input can be arranged in the form of the animal paw, however, if you have your own idea, embody it. So, many owners drink windows and input in the form:

  • the outlines of the cat head;
  • butterflies;
  • squares;
  • triangles, etc.

Before carrying out the discharge of parts, mark them on the panel being processed using chalk, marker, or other written affiliation.

Indicate the details of the marker

Indicate the details of the marker

Provided that you decided to make a cat with a paw, then the parameters of the circles will be as follows:

  • The entrance will be in diameter 22 centimeters;
  • The diameter of the windows will be equal to 5, 5 centimeters.

Place the windows are symmetrically, on a small distance from the future input.

Layout location scheme and windows in a cat's house

Layout location scheme and windows in a cat's house

Now proceed to drinking parts. For this procedure, a jigsik, drill and other tools that were mentioned by us in the first step implying the collection of the necessary materials are used. Start drying better with small circles, and complement the process of carrying the entrance.

That's what we should get

That's what we should get

Step number 3. Preparing the elements of our house to connect

Now it is necessary to take both billets that we drank from harvested and drawn panels, and mark points on them in which they will be fastened by the rails. In total, we have some regards, as you remember, 7 pieces collected (you can see a complete list of materials and tools in step No. 1 of this instruction).

In the earlies noted, it is necessary to make holes drill, so that both details of the house are drilled. Then, these holes need to deepen in such a way that they fit the self-tapping screws to which rails will be planted.

Saving holes for screws

Saving holes for screws

Now it is necessary to start preparing for the installation of RESEK. For this, the items mentioned are necessary:

  • smoothly sharpe;
  • Collect.

You can pick the thickness of the plates yourself. So, those of them that are intended for installation on the lower level of the house, can be made thickening.

What kind of racks will be, you can define yourself

What kind of racks will be, you can define yourself

Next, using the house walls prepared earlier, fasten the framework with:

  • wooden plates;
  • Self-timers.

Bonding We produce at those points where it was previously drilled specifically for this recess.

Domika frame is fully ready

Domika frame is fully ready

Step number 4. We make upholstery for cat housing

So that inside and outside the house embodying our efforts could not only play, but also feel comfortable, it is necessary to hide the house with a cloth previously purchased by us specifically for this case. The requirements for the material will be in this case as follows:

  • cuts should slightly exceed the size of the housing wall;
  • The fabric pile is desirable to pick up cut-off to protect the pet from constant leaving the hook claws.

It is perfect for the implementation of our idea of ​​artificial fur. It's not safe on such a cat. However, it is possible to hide the walls of the house and a soft carpet, which is worn very long and is suitable for the point of claws.

The billet from the fabric is cut exactly in the form of the existing "rear" and the "front" sides of the carcass. In the one that will serve as a finish for the input part of the house, by analogy with cutting parts of their wood stove, it is also necessary to cut the appropriate hole size.

How to cut out of the fabric cut for a house trim

So correctly cut out of the fabric cut for finishing a house

Then it is necessary to attach the fabric to the wood part of the house, using:

  • glue pistol;
  • glue and brush;
  • Other devices available from you.
We glue with the help of the fabric to each side of the future feline house

We glue with the help of the fabric to each side of the future feline house

By purchasing glue, it is necessary to choose the least smelling composition, since the cats are not a strong smell, plus, this substance will certainly allocate various toxic compounds.

Important nuance: After gluing the fabric, the house best put on a balcony or loggia, just that in order for all toxic evaporation to weathelate, and could not harm you, your children or animals.

After connecting the tissue, it is necessary to separate the places in which:

Step number 5. We make Lenjank

Now pay attention to the panel, which will be the basis of our future cat house. We take it, and gently glue the foam rubber to the place where the framework frame will be installed. The magnitude of the foam rubber must be equal to the distance from all sides, which remains between wooden slats, located with the side of the house.

The presented section of the foam rubber will be the first laying. Next to it will be the pipe - the leg, which will then turn into a bratechka.

Take the porolon and mark the place where the pipe will be mounted.

Take the porolon and mark the place where the pipe will be mounted.

After you draw a place for a pipe, and place the foam rubber, you need to fix the cloth youd on the entire surface of the platform, which you have chosen to finish a house. It should be strengthened especially carefully, at the same time using:

  • glue;
  • Building stapler.

Provided that the material you choose may turn, it is best to fix it along the edges, lining from all sides.

Step number 6. Cooking the roof of the house

Now, by analogy with the sex panel, it is necessary to glue the roof cloth. To do this, it is also necessary to mark on the cabin fabric to fasten on the panel sections, and proceed to the salary, using also:

  • glue pistol;
  • Building stapler.
The roof of the house must be placed by analogy with the floor.

The roof of the house must be placed by analogy with the floor.

Step number 7. Complete the house and foundation

Now it is necessary to take the non-rigid band strip covered on the platform, which has become the basis for the house, and adapt them from the inside of the frame, on the part where the lower rails are located.

Place two lanes of the fabric inside the frame

Place two lanes of the fabric inside the frame

Now we need to admit a house directly to the foundation of our design. We will do it with the help of self-tapping screws, which are screwed in such a way that:

  • The house kept tightly;
  • Details did not appear for the sex panel.
Self-tapping screws that you choose for fastening the frame, should be sufficient length. Provided that they are not, nails may also come

Self-tapping screws that you choose for fastening the frame, should be sufficient length. Provided that they are not, nails may also come

Then add our construct more civil appearance by covering the ridges inside the tissue bands previously attached to us to the frame.

The more accurate you hide the wooden beams, the less chances of your pet will be injured or getting offended

The more accurate you hide the wooden beams, the less chances of your pet will be injured or getting offended

We have a pre-prepared rectangle, made of fiber panel, must be placed on the roof of our structure, and attach it to construction brackets, which, then with the help of ordinary scissors, it will be necessary to hide into a tagged fabric.

Gently remove the brackets from the surface of the fabric

Gently remove the brackets from the surface of the fabric

Now our task is to enjoy the inner decoration of the house of our favorite cat. For this, the same fabric that we have chosen for the base must be separated by the "skeleton" of the buildings from the inside.

Step number 8. Fastener brake and sunbathing manufacture

Now it is necessary to use the previously prepared plastic pipe, as well as the tree bars to recreate the brake. We will act as follows:

  • insert the timber inside the pipe, and immediately fasten the items with all the same screws or glue;
  • From the remaining tree fiber and chopstone, we will make future parts for a sun bed.
By connecting two parts, it is necessary to make the basis for our brates

By connecting two parts, it is necessary to make the basis for our brates

From these elements will be manufactured by sun bed

From these elements will be manufactured by sun bed

One of the cut parts cut earlier must be cut to drive it directly to the pipe.

The hole in the laying should be the same as the diameter of the pipe with the extent in the bar

The hole in the laying should be the same as the diameter of the pipe with the extent in the bar

Now it is necessary to overlap the pipe protruding from the bottom half.

The fastening of the pipe on the basis is carried out with the help of self-tapping screws, as it can only be strengthened by our scratching enough for the cat to be shot down. It is best to make three or four compound points, as shown in the picture below.

How to attach a pipe to the sexual panel

How to attach a pipe to the sexual panel

At the base, our future brazetchochka is best attached to the same fabric as the sex panel, since cats will not touch this part of the house in any case, because when scraping claws, they pull out the paws up.

It is necessary to glue a foam rubber on the upper bed. To do this, cut out a soft detail of the desired size, and we adjust it into place.

So that the cat was nice to relax at the second level, soften the surface of the sun beds

So that the cat was nice to relax at the second level, soften the surface of the sun beds

On top of the foam rubber, it is necessary to plunge the cloth suitable in color to other textile cuts that we have already separated our facility. After the surface of the bed will be tightened, from the bottom side of this level it will also be necessary to put the fabric so that its edges are not sticking out in different directions, thereby:

  • shortening the service life of the surface;
  • Violating the harmonious appearance of the facility.

Now it is time to wind the pipe prepared by our rope, which is placed in which the timber is placed, since it thought not only as a backup for the second yarus of the house, but also as a brazetchka. The point must be carried out quite tightly, with the ending gently fasten with glue.

We teach the cat to the brateching

We teach the cat to the brateching

If you wish, you can also attach the rope from the bottom side of the upper tier, to the end of which will appropriate to attach a toy so that the cat chased it and thus occupied himself.

Now you need to make a bracket from the board, which will be located under the inclination relative to our house. The lower side of the brackets should come into contact with the base of the house.

To preserve the harmonious appearance of the last detail of our house, you must also decorate it with the cloth we use

To preserve the harmonious appearance of the last detail of our house, you must also decorate it with the cloth we use

Both end of this detail must be placed by the same cloth that you used earlier. Then the middle of the desired boards must also be wrapped with a rope or twine so that the cat can sharpen his claws about it. We set the desired board to the house on the tangent, and from the bottom we are screwed by self-drawing.

Hooray, our house for a cat, made with your own hands, is completely ready! Now you can not just make it yourself, but also to improve, adding several new tiers or premises, provided that you have several animals.

What does a ready-made cat lodge look like from instruction №1

What does a ready-made cat lodge look like from instruction №1

Instruction number 2. House-castle for king animals

If your cat is not a simple representative of the Feline family, and the muzzle of blue blood, we advise you not to be broken, and immediately take care of the creation of a spacious castle for him. This option is good not only with its royal appearance, but also:

  • the ability to suspend the construction on the wall;
  • the fact that with due ability you can make a project home for a cat much more interesting and functional;
  • By the fact that, according to the result, your cat will receive a real refuge on the hill, where he can deservedly relax from annoying small children, dogs, other animals.

If a regular house for cats would eat a significant space in the apartment, the wall lock for the cat will leave you satisfied and you and your favorite.

How will the ready-made facility look like

This will look like a ready-made facility.

Step number 1. We collect the necessary materials

First of all, it is necessary to collect building materials that will continue to be embodied in the turrets of the real feline castle.

So, you need to collect:

  • chopper panels;
  • Rake 4 pieces (2 to 5.5 per 44 centimeters and 2 to 5.5 by 23 centimeters);
  • Tolst cotton rope, for example, made of jute;
  • Self-tapping screw, with which we will continue to fix the elements of the house;
  • Foambone to create soft sites for rest;
  • Fabric that will not just break the claws;
  • Super chains with a tassel or a tired adhesive gun.
We harvest materials

We harvest materials

After the necessary materials are chosen, engage in collecting the necessary tools, such as:

  • construction stapler;
  • scissors;
  • Lobzik;
  • saw;
  • screwdriver;
  • drill;
  • marker;
  • Santimeter roulette.

Now that we have gathered everything you need, go to the next step.

Step number 3. Preparatory work

The lock presented in the figure has the following parameters:

  • Fitting panels for turrets are 34 to 34 centimeters;
  • The height of the walls of each tower is 45, 5 centimeters;
  • The point in which the second floor begins is located at an altitude of 30 centimeters from the bottom of the wall.

In other words, to build a planned turrets with you, you need to cut down:

  • bases;
  • the walls of the specified size;
  • side walls of a small magnitude, approximately 30.5 per 44 centimeters;
  • The shelf whose value will be 30.5 to 30.5 centimeters.

It should also be remembered that you must have 4 racks of the dimensions we should have been prepared.

The wall thickness will be equal to about one and a half centimeters, as this is the standard parameter of the usual chipboard.

Pet must have enough space in the home

Pet must have enough space in the home

Why do you need to be determined in advance with the magnitude of the turrets? Everything is very simple: a house, in which your satuled pets will be, more precisely, its segments should provide cats with the opportunity:

  • It is convenient to stretch;
  • stand in full growth;
  • Meach and stretch.

Provided that you still decide to make the second floor, it is best to make houses with sides, so you protect your favorite animals from falling on the floor while sleeping. Despite numerous reasoning that cats fall on the floor with all four paws, you can be sure that the sleeping pet will fall as ugly, painfully and dangerous as representatives of other species.

Step number 3. Getting up drinking parts

So, we take harvested choppers, and start drinking 9 blanks (if you do not have ready-made regions) of the sizes we specified. The shape of the blanks, as we remember, rectangular.

Details of the constructed design

Details of the constructed design

Now that everything is ready, proceed to the creative part of the work. We need to draw cloves that will portray the walls of the towers. The height of each teeth will be equal to 6, 5 centimeters.

Next, you need to take a large-term wall, which will be located on the side, and divide one of its sides to 5 identical sections, putting the corresponding markups. As we remember, the side is equal to we have 34 centimeters, so when dividing it will turn out:

  • 5 segments;
  • Each of which will be equal to 6, 8 centimeters.
How to divide

How to divide

Then you need to take other side walls, the size of which will be smaller, and attach them to the marked side of the future house, while setting up with the edge of the prepared rails. Then, from the bottom, copy the markup on the details of a smaller value. It is necessary that according to the result of the walls of the houses that will betray the turrets to similarity with the real lock, were decorated with clums of the same size.

After the ends are marked, it is necessary to transfer the markup to the plane of the plank, and then spend the line, the length of which will be equal to the height of the teeth - 6, 5 centimeters. After we connect the resulting points, it turns out a ready drawing.

What will look like a ready drawing

So it will look like a ready drawing

Be sure to tick the cross parts of the details you are going to cut out to not make a mistake. As you can understand them, there will be a smaller number about those teeth that will remain. Now it is necessary to cut off the branches according to the drawing, which we previously performed.

This is how the finished details of the turrets will look

This is how the finished details of the turrets will look

Next you need to make an entrance to the turret. For this you need to measure the same segments from the center, and mark points. If you have desire, you can draw the top line of the inlet, draw the rounded one.

Tower parameters will be as follows:

  • width is 20 centimeters;
  • Height is equal to 25 centimeters.

Now pay attention to the drawing, displayed in the picture below, and perform on it to cut the entrance using the jigsaw, manual or electric, depending on which one you prepared.

Drawing of the detail in which the entrance to the future house will be located

Drawing of the detail in which the entrance to the future house will be located

Step number 4. Going to the castle for our pets

Now it is necessary to take the wall whose width is 34 centimeters, and in it, with a drill, perform recesses for the screws.

The deepening in size should correspond to the size of the self-samples

The deepening in size should correspond to the size of the self-samples

Now with the help of fasteners, it is necessary to connect the side wall along with the one in which we did the move. In the same way, we join the second sidewall, laying between them, there is such a need, a shelf.

This is how the workpiece looks like in the initial stages.

This is how the workpiece looks like in the initial stages.

After all parties are adjacent, you need to install a turret on the teeth, and attach to it the base of our fabric. It should also be attached with self-draws.

Do not be afraid to turn the box, as it is quite stable, the main thing is to hold it from the side

Do not be afraid to turn the box, as it is quite stable, the main thing is to hold it from the side

Now measure approximately 30 centimeters from the beginning of the house, and make recesses to fix the shelves with self-draws.

The shelf is attached as follows. This is the second tier of a house where the cat can also relax

The shelf is attached as follows. This is the second tier of a house where the cat can also relax

To close the sections, which remained after cutting parts, it is necessary to attach the reckons of the appropriate size.

Now it is necessary to cut the fabric prepared in advance in such a way that the cut in height and width was somewhat more details of the tower. Then sign and adjust the size of the piece of fabric, respectively, the size of the part. If you make a house in our example, but the parameters do not observe, the size of the piece of fabric you will also have to measure yourself.

We stretch the cloth on houses, and fix:

  • with glue;
  • Or using stapler for furniture.

Remember that it is very important to wrap edge in parallel in order to keep the harmonious appearance and the accuracy of the house. In the location of the teeth, it is necessary to leave on the allowance to allow a half centimeter of the fabric to adjust the edges and close our item completely. It is very important that at the same time the glue, which you will fasten the tips did not have a sharp smell, since the cats react to such an extremely negative.

Gently put the edges of the fabric

Gently put the edges of the fabric

For teeth, it is necessary to prepare several long pieces of fabric, the height of which will be separately up to 6, 5 centimeters, and they also separate the tower's cloves directly from the inside of the structure, from the floor of the second tier.

In order for the side inputs to be decorated with textiles, you need to apply the woven material directly to the house, measure the desired value and trim it. By glue or the construction stapler fasten the edges.

Carefully cross the structure so that your cat was pleased to be in it

Carefully cross the structure so that your cat was pleased to be in it

In the same way, it is necessary to finish all the "bare" details of our house. Measure the segments that require fastening, mount them and secure.

Then we will need to make soft beds for your favorite pets, so that they can be comfortable to relax on them. You need to extinate every detail just as you measured the sections of the fabric. Only this time before fixing them to the houses, it will be necessary to wrap every foam piece with a cloth by fastening it already known to us by ways.

Now you need to put fasteners on the finished tower, and hang it on the wall. To do this, you must first drive the dowels.

If desired, these houses can be equipped with a clawholder by analogy with how we did in the first instruction:

  • find a board or plastic pipe;
  • Complete fixture with twine or rope.
You can use a separately standing tower

You can use a separately standing tower

Step number 5. Making bridges between turrets

In order for your pet, you can easily move around your wall possessions, and not jump there, as in an extreme park, it is best to attract bridges to the turrets.

The role of these crossings between sections can play:

  • a piece of wooden board;
  • plywood;
  • Other dense material.

It should also be placed by the fabric, the same thing that was selected for the case, or some other. So you:

  • Make a favor in the complex the most pleasant for your pet;
  • Song its paws from the offplaces and surface roughness, which can cause the cat.

We want to draw your attention, That the animal could use each of the elements of the design, they must be at some distance from the wall of the room to which will be attached.

What should happen in your opinion

What should get you at the end of work

As you can see, if you have a desire and free time, make an extraordinary house for your own pet is not so difficult. You can not only change the color of the upholstery, but also varied:

  • the magnitude of the house of the house;
  • change the height of the details;
  • Place such live corners throughout the perimeter of the house, turning your apartment in the "Cat Rublevka".

Provided that you will do a lot of rooms, the entrances every better do on each side to create some of them like a tunnel.

Instruction number 3. Gaming two-storey sun bed for a cat

As you could already understand from those presented to your attention above instructions for making a cat house, tasks for such structures are different:

  • become a convenient place to rest for the animal;
  • Entertainment.

Thus, the cat should be able to not only sleep inside the made house or sun bed, but also to carry out time with interest in it, for example, by calculating claws. In this material we will see how to make a three-storey bed for a cat, which will enter the pet entertainment element.

How will our future house look like

This will look like our future house.

Step number 1. We collect the necessary materials and tools for the manufacture of the intended complex

So, when you are dealing with the forces, it will remain for small: it will also be necessary to collect tools and materials:

  • Two coffee or coffee tables purchased by cheap or old who have lost their value;
  • rope or twine;
  • artificial fur;
  • construction stapler;
  • glue pistol;
  • Screws and screw;
  • Light or dark paint, preferably washable.
Washing paint is useful

Washing paint is useful

Step number 2. We prepare tables

Now, when we collected everything you need, we will deal with the preparation of the details. First of all, we treat tables. Do on the disassembly, since each individual detail of these items should be prepared for operation by:

  • jewelry;
  • Improvements.

So, from a solid subject we need to separate:

  • legs;
  • shelves (if available);
  • countertop.

It is best to select a table with a shelf, since it is she who will subsequently play the role of a sun bed, protected from foreign observers, etc.

Old coffee table

Old coffee table

Step number 3. Separate shelves fur

Now that we separated all the details, we will pull the coating of artificial fur to:

  • Shelf larger in the size of the table;
  • The lid of the small table, which will be the third tier of our facility.

It is important to remember that the fur must be carefully fixed, carefully flexing its edges under the shelf and the worktop, which in turn should be fixed with glue or by the construction stapler.

Neat fastening - pledge of long service sun bed

Neat fastening - pledge of long service sun bed

Step number 4. We make fixtures for sharpening claws

The feet of the table, as you could understand, will play the role of brazetchers, provided that you will wrap them in advance prepared:

So, you can wrap both the supporting elements of both tables and:

  • only small;
  • or just big;
  • Or two legs there or here.

During attachment, the rope needs to be recorded also with the help of construction brackets or glue.

Separate legs from the table and with the help of the rope, turn them into multifunctional brates

Separate legs from the table and with the help of the rope, turn them into multifunctional brates

We recommend to paint the remaining elements of our tables, which will approach the interior of your apartment and in general to please the eyes. At the same time, it is important to choose a paint that is safe for animals, and when the legs are brushed and hitting it to the gastrointestinal tract it will not cause any lesions.

Colors You can choose any, but all the better neutral, since the sun bed will become, in fact, the subject of your daily everyday, it means that there should not be irritating

Colors You can choose any, but all the better neutral, since the sun bed will become, in fact, the subject of your daily everyday, it means that there should not be irritating

After the paint finally freezes, you can proceed to the reverse connection of the details.

Step number 5. Collect design

Despite the fact that we, in fact, return the details in place, our design will be slightly improved by:

  • setting a small table on big;
  • Bonding them through the legs using self-tapping screws.

It is necessary to put a small table so that it takes no more than 2/3 of the big, since his legs will be clawed, which means that the cat must make it comfortably to blow their claws about them.

The final touch is adding entertainment elements, for example:

  • toys hanging on the rope from the second tier to the floor;
  • Fluffy upholstery and other accessories that can distract pet attention on themselves.

Here, no one limits your fantasy, you only need to come from the configuration of the house and your desire or reluctance further to work on the entertainment component of the platform.

Ready Supitsa looks very attractive

Ready Supitsa looks very attractive

Instruction number 4. Cathouse in several floors

We have already told you how to make a real castle for a pet, however, if you are the owner of a true urban cat, then his choice will fall rather on the cat "New Building" - a multi-tiered house that can accommodate both one and several pets at once.

We want to warn: To build such a residential feline complex with your own hands, you need to work hard and spend a solid amount of strength and patience. However, the result you end up will pay off not only physical, but also mental resources spent on the manufacture of a house.

In such a structure, your pet will get the opportunity:

  • carefully calm down;
  • play;
  • Sharpen claws, etc.

So, we will proceed to consider the instructions.

What, according to the result, we should get a house

Such we have to get a house

Step number 1. Preparation of building materials and tools

So, as in all previous instructions, the first step in the manufacture of a multi-storey house for a cat will be the preparation of the necessary materials, for example:

  • chipboard;
  • Fabrics for upholstery, preferably soft, with cutting pile;
  • rope or twine for brakes;
  • plastic pipes;
  • glue;
  • self-tapping screws;
  • loop for which doors hang;
  • screws;
  • Metal corners;
  • scissors;
  • Lobzik, electronic or usual;
  • centimeter roulette;
  • Pencil.
To create good brates need twine

To create good brates need twine

When we collect all the necessary materials, you can start making our house in which there will be as many as 6 floors!

Step number 2. Come on the ground for our multi-storey building

So, first of all, we will take care of creating a foundation that will keep all the other floors of our complex. In the same reason there will be:

  • entrance;
  • Window (optional).

The entrance, as well as the windows, can be completely different form, which one you yourself wants.

You can define the input form yourself

You can define the input form yourself

The most popular options are considered:

  • cuts in the shape of a cat's head;
  • Entrance in the form of a feet of an animal;
  • Triangular entrance, etc.

Before chopping it on one of the walls, you need to draw a manually template on paper. You need to draw a pattern in such a way that later through the trained entrance animal could freely enter the house, even if it is:

  • will make up;
  • will run into it at an angle, etc.

After the figure is defined, create a template, impose it to the chopper panel, circle a marker or pencil, and then cut off the jigsaw.

How should the lower tier look like from the inside

So the lower tier should look like inside

Now it is necessary to assemble the base in the box of absolutely arbitrary size. For example, in the photo you can see a house with the following parameters:

  • Length - 80 centimeters;
  • Width - 55 centimeters;
  • Height - 30 centimeters.

You can choose completely different parameters for your product, however, observe only one condition: your cat should be comfortable.

The walls are alternately from the inside you need to fasten the corners and fascinate with screws. The open part of the box must be equipped with door hinges so that it opens if necessary. It is necessary to do this in the same way as shown in the picture, putting a loop also on the previously not an attached wall.

How to fix the door loops

So correctly fix the door loops

How fasteners will look at the end

So fasteners will look at the end

Step number 3. Making Kogtetchki

As you could understand, the pipes will serve not only by inter-storey backups, but also clawed. To the base of each pipe, metal corners must be adjusted. Thus, we will succeed easily attach them to the base. If you want to betray the house special stability. It can be inserted inside each pipe to insert a round trimmed bar, however, it is worth remembering that in this case the overall weight of the design will increase, and it is better to fix them no longer with the help of the corners, and sophons, and not to the chipboard, but to plywood, for example .

Note: Using various pipes and panels can be made so many floors as you want. At the same time, you are not limited to especially in the form of the future facilities, allow your fantasy to determine how feline asylum will look like.

Every pipe can be wrapped:

Thus, you will get a large amount of brakes, and your upholstered furniture will be protected from the claws of the pets.

At each level you can do different in the form of the floor

At each level you can do different in the form of the floor

Step number 4. Mount the stairs

It is very important that the cat can safely climb on all floors of his house. To do this, it is necessary to equip our high-rise building by a staircase that will stand relative to the house a little at an angle.

A constructed element of the structure can be built from ordinary wooden boards, sawn into several parts. The stability of such a ladder is the most important nuance, as if she falls, can pick up your pet, which is extremely negatively affecting his health.

Attach the structure This element can also be using furniture corners. The angle of inclination relative to the feline high-rise building will be approximately 45 degrees.

Step number 5. Making a house on the top tier

A feline house will look very impressive, which will not only begin with a residential "box", but also end it. It is also advisable for the last floor to adapt the roof with two slopes as on the present house. The basis of this last floor must be installed and attached to several pipes, it is best located relative to its edges symmetrically.

Build a house on the last tier - one of the latest elements of our work

Build a house on the last tier - one of the latest elements of our work

From the existing chipboard, we cut out the details of an arbitrary size, such as you like the most likely, and we form a similar house on the lower tier, fixing the walls as well as the corners with screws.

Remember: Such a cat dwelling, you want or not, you will have to periodically clean in any case, since the cat will be:

  • carry it to him;
  • tear toy there;
  • lift inside, etc.

That is why one of the sides of our roof or a house, as convenient, it is necessary to put on the door loops. Thus, you will make care of yourself, and the cat can add an entertainment element.

One of the half of the roof should be planted on the loop for the sake of relief harvesting of the host

One of the half of the roof should be planted on the loop for the sake of relief harvesting of the host

In the image presented in the image, you can see the most ergonomic solution - a house with an entrance located on the side, equipped with a revealing roof.

Interesting fact: The last floor of our house, which has just been made by us, can be used as a pad for jumping to the closet. No matter how high the cat was not sitting, her nature demands to get even higher. The brief of her house to the closet, and give her such an opportunity. To do this, it is best to take another plastic tube and a small chipboard.

How to connect the panel with the cabinet

How to connect the panel with the cabinet

Step number 6. We carry out the finish of our structure

So, we finished our multi-storey house, let him down to the closet, however, he had not yet acquired the appearance that we would like. If you do not decorate our work, it will not lose its properties, however, will never be able to become a stylish subject that complements the interior. By the way, this property for a cat house is important, because you will watch it every day of your life, so let's get bored with the finish.

Thus, all plastic pipes must be separated using a rope or twine so that they not only have acquired a stylish appearance, but also turned into scheduling. The vertex and the base of the cable kites are fixed with the help of glue or construction stapler.

Then, you need to take carpet, or a cloth with a cutting pile, and puncture it:

  • All the inner parts of the house (it is best to do this in the process, but if you do this after, it is enough to glue the fabric only on the floors inside the houses and platforms, the walls can not be touched);
  • External sides of cat apartments;
  • surfaces of playgrounds, etc.
The premises are best to separate the cloth from the inside

The premises are best to separate the cloth from the inside

Carpet - soft material that will create a coat for cats, and at the same time will allow them to sharpen claws on it, without losing appearance. To stick the carpet smoothly, you need:

  • measuring each discharge detail;
  • If necessary, on the template and patterns on the outside, cut openings with scissors to bend.

Fixing the folds and edges of the fabric is also carried out with the help of glue or construction stapler. If you want to create a monochrome structure, the cloth is better to take the same. Love brightness, then take several different shades.

Do not be lazy, and cover with cloth all available build parts

Do not be lazy and cover with cloth all available build details

The finishing of soft material is also subject to:

  • roofs;
  • ends;
  • Corners, etc.

As you can see, make a cozy multi-storey dwelling for a pet is not so difficult, it is only important to observe the sequence of actions, and a certain amount of time to pay the process.

Instruction number 5. Comfortable Lena

Cats are creatures that love to hide. However, choosing between a closed space and a comfortable sunrise, they will always choose the second. That is why we should tell you also about how to make a comfortable sleeping place for pet. Please note: if you do not speak the skills of working with construction materials and do not know which side we will approach the jigsaw, the manufacture of such a bed location is the best option for you.

What will look like a ready lyry

It will look like a ready-made sunbed

Step number 1. We collect materials necessary for making

As usual, we begin from the collection of materials necessary for the manufacture of our underlaying materials. So, we will need:

  • Warm panels whose size will be 36 per 48 centimeters;
  • Foam cut with parameters 35 to 46 centimeters;
  • Soft fabric or carpet, leatherette, artificial fur;
  • scissors;
  • tape measure;
  • Sewing accessories.
What required materials we need

What necessary materials do we need?

Step number 2. Separate the place in which our Lena will be located

Why is it important first to determine the place where you will be a sleeping point of a cat? It's very simple: similar parameters of the sun bed will depend on its size and forms. In other words, you may wanted to place a cat pillow on:

  • windowsill;
  • table;
  • window;
  • floor, etc.
Give preference to the windowsill if your favorite spends a lot of time on it

Give preference to the windowsill if your favorite spends a lot of time on it

All these parts of the apartment's indoor space will be different by:

Provided that you do not know where you will put a sun bed, make a sleeping place with the following parameters:

  • 50 centimeters;
  • For 30 centimeters.

When you choose the place where the cat will rest, proceed to draw the template.

Step number 3. Cooking details

Blacks on the harvested fibreboard Oval form with the parameters you are interested in. If you immediately draw oval for you - the task is impossible, draw a rectangle, and already an oval.

Template of our sun bed

Template of our sun bed

The resulting oval from our fibreboard and cut down, while you need to perform exactly twice the action. Now you need to measure and prepare flights of the future bed. For this you need to take a foam cut. The length of the side should be equal to 135 centimeters, and width 10 centimeters.

Learn a bought billet to our workpiece

Learn a bought billet to our workpiece

Sliced ​​foam "scarf" we add twice and with the help of glue in this position fix. Then the resulting sausage must be covered with a cloth, such as artificial suede or fur. Sut off the fabric, make the allowance so that you can easily attach this design to the base of the bed below.

Very convenient for the manufacture of sun bed Use a glue gun

Very convenient for the manufacture of sun bed Use a glue gun

Now we combine the fabric and panel made by us, leaving the free tissue of the fabric from the outside.

We connect sterns among themselves, fixing the protruding edge of the fabric using glue at the base of the sun bed.

Step number 4. Create a coat

Now it is necessary to make a soft inside of our sun bed. To do this, it is clearly cutting out the part from the foamball, slightly smaller, so that it can clearly fit into the sun bed.

Porolon - soft material repeating body shape

Porolon - soft material repeating body shape

The finished part is wrapped with a cloth, which is sewn from the bottom with the help of ahead of the cooked threads and needles. The finished pad in the middle lubricate the glue and put inside our sun bed.

Hurray, our idea is completely embodied!

Pros and cons of independent making a house for a cat

Now that you know how to make a house for a cat in several options, let's see what benefits you get from these knowledge.

Table. Pros and cons of making a house for cats do it yourself

Benefits disadvantages
  • much cheaper than buy;
  • wide space for creativity;
  • You can make a house detail of the interior;
  • You are free to vary the number of tiers, premises and other elements yourself;
  • The ability to continue to replace the broken parts without difficulty;
  • control of the environmental friendliness of materials from which the house was made;
  • All tools and building materials are sold everywhere.
  • Preferably the presence of construction skills;
  • Temporary costs.
  • As you can see, the minuses of our venture are quite a bit. At the same time, if there is enough time, they are fairly easy to circumvent, as the lack of skills compensates for the care of the work carried out, and the large amount of the required time is found at each host on weekends.

    If you have a dog, Our article Tell me how to make a house yourself and for him.

    What is not entertainment - collection of a pet for a pet

    What is not entertainment - collection of a pet for a pet

    Let's summarize

    All you need for self-making a cot for a cat, - enthusiasm, desire and simple building materials and tools. In the presence of all mentioned elements, you can be sure that the result is satisfied not only you, but also the one for whom it was all stood.

    Lightweight Feline Domic

    Lightweight Feline Domic

    Video - How to make a house for a cat?

    A cat house is a cozy Berlerg, where he sleeps, hides from curious looks and arranges an ambush during the game. In the store prices on a cat housing start from 700 rubles. With your own hands, you will make houses that spend 2 times less.

    Such savings are especially important when not one cat needs in guardianship. Or you can't take animals home, but you want to help them in the winter. The article has ideas and instructions, how to make a comedian for a cat.

    How to choose a feline apartment

    We choose apartments for themselves, based on the family size and its desires. Animals also want enough space for a comfortable life.

    Before creating a house, take the measuring tape and measure the pet length. For a comfortable stay in the apartment, the animal must fit in it, free to stretch and straighten the paws.

    It is not necessary to get involved in construction - if the design takes more than 15% of the room, it will be inconvenient to a person.

    Look at the photo of a house for cats with your own hands, and inspiration for construction.

    For a cat family

    Cat and kittens live well with two outputs. When there are few places, the mother will not bring kids to a stuffy place.

    But excessive openness, too, for nothing - the exits should not be opposite. It is best when the second hole is on the side or on top.

    When choosing a size of a lazium, consider that a cat with a kitten in the teeth passes through it. One entrance can be done when the house is much higher and wider than the pet.

    List of objects from which you can make a house for a cat:

    • Cardboard box that can be bought in the mail;
    • Scotch;
    • stapler;
    • scissors;
    • Soft fabric (velvet, plush, fleece);
    • Diaper, old blankets or things.

    Step by step instructions 1.

    First connect together long flaps of the box, and glue them with a scotch. The same procedure is repeated with short sash. It will be the floor for the future house.

    If the box is big - cut out a large hole in the middle of one side. At a smaller volume, two small windows are suitable on the side of each other.

    Cardboard circles do not throw out. When the kittens are growing, they will crawl into different directions. You will consolidate the "doors", and the kids will not scatter around the house to do Skoda.

    Top boxes also camp with scotch, but for reliability, apply PVA.

    Using a stapler, hide the outer walls with a soft cloth.

    Find the entrance place, and ride the fabric. Edges Complete and secure the stapler. It is impossible to leave inside the sharp tips of the clips. Generate them with screwdrivers or round-rolls.

    Put inside the diaper and another fabric. The main thing is that the tenants are warm and gently. It is categorically impossible to put watts, because it can get into the nose or kittens mouth.

    Nest for the future mother with children is ready!

    "High"

    Singles most appreciate the places at the height. So it is more convenient to inspect their possessions. The house can be placed on a warm windowsill or nail to the wall. For small pets, it is enough to make a design on a leg with a height of 15-20 cm.

    Purchase:

    • Plywood (12 mm) size of 75x50 cm;
    • Poles from the bar 50x70 cm (only 4.2 m);
    • Carpet on jooty 1x2,5 m; u
    • Rope 20 m;
    • Corners 15x20 mm, 40x45, 55x20, 35x40 and a pair of large for mounting to the wall.

    Before you begin, create drawings and sizes for proper manufacture.

    Step-by-step instruction 2.

    For the design, you will need three pillars: one 220 cm, the second - 120 cm and the third - 80 cm. On paper, mark the location of the backups, in which the longest should be closer to the wall. Poles are located a triangle from the highest to the lowest.

    From the stencil, transfer the markup to the surface of plywood. Each pillar is attached to four long nails, drill a hole of a smaller diameter. Outside the backups, secure the 55x20 for large and 35x40 for the remaining.

    Then make the same markup for other platforms. A smooth hole will provide a 12 mm perico drill. The slots must be a couple of millimeters more than the columns.

    Create from five to six platforms of an arbitrary shape - you can semicircular. Put on the platforms on the poles and fix the corners at the desired level. At the end, cross the platform of the carpet.

    For a house, there will be 2 plywood sheets 75x50 cm chopped by 4 rectangles. Paul, roof and side walls are attached to each other with metal corners with short screws. On one of the walls, make a semicircular hole - the future input.

    Hold the house carpet from the inside for comfort. And then fasten the roof with the corners. Its surface also make soft. Finished house attach between the fourth and fifth platform with large corners of 35x40 mm.

    Wrap a rope poles. It is more convenient to attach the rope with brackets, and then climb close. To keep tight, every few turns pick them up with a hammer. Scratchtoles are ready.

    Lena-tent

    When you have two or more pets, you should not make them one big house at all. Each cat needs its own territory. Without a personal plot, he feels deprived, and may be aggression to declare his rights.

    It is best to make a mini-town from several houses connected together. In such structures there can be canals with balls, pipes and other entertainment elements.

    Many ideas, how to make a house for a cat, are difficult to learn. The easiest option is to make individual beds for cats.

    You will need:

    • cardboard or plywood;
    • 2 segments of 7 mm wire in thickness;
    • pillow;
    • Mike.

    Step-by-step instruction 3.

    1. Mark the point of holes and cut them out.
    2. Insert the cross-lunch in the holes. This is a frame of a future tent.
    3. Put the pillow on the bottom;
    4. Tension T-shirt on the frame. The neck of the clothes will serve as an entry, and the bottom is the floor.
    5. Tighten the sleeves into a T-shirt.

    Refuge for homeless cats

    I want to take care of the brothers of smaller, and there are no special skills or tools? No problem. You can create a good warmed house, which will save a few feline shower from frostbite.

    Materials:

    • 2 Cardboard boxes are large and smaller (they can be replaced with an old bedside table or wardrobe);
    • Foam Foam Go Polyopolster;
    • Scotch;
    • rags;
    • Waterproof fat film (tablecloth / bath curtain / greenhouse film);
    • scissors.

    And now we make a house for a cat with your own hands step by step.

    Step-by-step instruction 4.

    At the inner walls of a large box, attach a foam with a tape.

    Insert a small box like a nursery.

    Place the rag without synthetics on the bottom. Do not use wool, because it strongly absorbs moisture. The best option is a fleece blanket.

    Wrap the house with a waterproof thick film. Wide scotch, curse all the seams to avoid drafts.

    In the corner of the design cut out the yield 15x15 cm. As you know, the cat breaks in the hole if the head passes. A small hole is necessary to preserve heat. The edges of the opening will be built with scotch.

    Make a foundation from bricks or boards - a house need to rise above the ground for extra isolation from cold and water.

    If you use an old bedside table or locker, take them to the tree of the twine. Or make legs, having a wooden bars to base.

    Pledge of Comfort

    The cat's house should be her fortress - where she can relax in silence. It is not necessary to pull it out from there like a mollusk from the sink.

    A pet will feel helpless, and will leave such an unreliable dwelling in search of more secluded places.

    Stock Foto Domes for cat do it yourself

    Tell your friends 😊😊😊

    Cats - wayward, independent and very responsive animals. For that they love them. Any games alternate with rest, and for this Each pet needs its own space. For example, such as a house. You can choose a suitable instance in the store. And you can build a feline asylum with your own family. It is not difficult, fascinating and much more economical for the family budget.

    The content of the article [Hide show ]

    Features

    Feline lodge performs several functions:

    • Refuge - a place where you can hide from the rest of the residents of the house;
    • Pan-eyed - Pet should be able to overlook the maximum space around it;
    • Warm, cozy nest where you can sleep or just be sought and soaked;
    • Playground with Kogtechochka , ribbons, tunnels and other game accessories.
    Original Cat House

    Original Cat House

    So to look attractive for cats, the house should be:

    • in size cats - She must freely go to it and be able to freely curl into the ball, but it is important not to overdo the dimensions;
    • Maximum consist of natural materials - wood, cardboard, natural felt and other (synthetic materials electrified cat wool, and this gives discomfort - plastic, artificial fabrics);
    • removed from the technique and items, publishing loud sounds, - away from the TV, radio, music center;
    • warm to a measure that is not subjected to draft - Cannot be installed under the windows, on the windowsill, close to the radiator, near the door or passage.

    IMPORTANT! An ideal option to equip a cat's rest space in the far corner, relative to the entrance to the room or the wall, located oppositely from the entrance.

    Stylish Cat House

    Stylish Cat House

    The house should be in size pet

    The house should be in size pet

    It is very important not to forget about the humidification of air in the premises containing pets. Read in our separate article how to make an air humidifier with your own hands. And also, what kind of air humidifier is better to choose.

    What is he?

    House for cat or cat should meet all the requirements of the four-way friend walking in itself. To begin with, the cat's habits should be studied. Perhaps he is pretty playful, then he needs to organize special homemade fixtures for games.

    Some cats prefer to sleep more, then take care of the place to relax to a greater degree. Some Cats prefer to sharpen their claws about furniture owners What not only is nervous, but also leads to the rabies of a person at the sight of a damage to expensive property. Homemade brackets and houses for cats can solve the problem.

    Wall Mounted Complex with Kogtechoby

    Wall Mounted Complex with Kogtechoby

    So, you analyzed the preferences of your cat and now define with the design model. It may include:

    • Additional "devices" for exercise. Playful cats need a place where you can spill your energy. Install the additional pillars with the tabletop, accused by the twine. Such houses can be found on sale in specialized stores, but their cost can exceed the permissible family budget of the family. They are easy to do independently from plywood and other building materials.
    • The presence of a black stroke in the cat's house is obligatory. The cat can pounce on the enemy, hide in his asylum and change the place of concealment with the help of black stroke. With the danger, the cat will lead through the additional course of the kittens, and then it will throw on the enemy. This is the character of feline, it is impossible to argue with them.
    • Dimensions of a cat for a cat should be calculated in advance. If the four-legged medium-sized pets, then it will be enough to make a house with a diameter of 15-20 cm, and the size of the "sleeping" place and shelter in the form of a cube with a clock is 40 cm. Next, repel from the above indicators. Dimensions of additional devices in the form of layers and other utensils should also be selected in accordance with the size of the animal. Standing on the hind legs, the pet must be taken by the front.
    • The use of brakes as an additional attribute should also be thoughtful. First, it should be made of durable material, which will withstand all of the onslaught. Secondly, it must be available from any angle of erected construction.
    • Examine the habits of a pet according to the peculiarities of its breed. For example, Siamese or Bengal cats love to get up on the hind legs. For them, it should be done to make a house of at least 60 cm with a height of at least 60 cm.

    It should also be noted that the design of the house can differ significantly due to the gender of your pet.

    For instance, Cats are more playful , love to hunt, so they should build a building with a big overview. Here You can stay on a sleeve house .

    Cat Sleeve House

    Cat Sleeve House

    For the cat, it is better to make a two-level design where the upper level will help to look out for the enemy, and the lower mother just derived offspring uses for an ambush, and in the case of a danger approaching the future offender.

    Duplex houses are preferable for cats

    Duplex houses are preferable for cats

    Also cannot be allowed a large view for the cat's house - it prefers more prefer to secure its lair.

    See in this video, how to make a game complex for a cat with your own hands at home.

    Pet pets bring us a lot of joy and warmth, but the inalienable attribute of their stay in the house is wool, so it is important to take care of the purification of air in the apartment. Read in our separate article, what air purifier to choose for an apartment.

    Photo

    The following photos present various versions of the houses for cats.

    In wool felting technique

    In wool felting technique

    Wooden summer house

    Wooden summer house

    From cardboard

    From cardboard

    Wigwam

    Wigwam

    Knitted Lena

    Knitted Lena

    Hammock for cat

    Hammock for cat

    1. Game complex - Step-by-step instruction

    Cat home with your own hands Easy to make from girlfriend. Here you will need a little snarling and a little skill. If you are not a wizard in working with hammer and nails, you can use simple methods for the exposure to the structure.

    Cardon house

    Cardon house

    Cat game complex It takes particular popularity among ordinary people and breeders of cats and sellers of pet stores, because it is here that you can find all the variety of housing for animals. Take advantage of this opportunity and carefully consider such structures in order to then make a variant of the "housing".

    Gaming complex of sawing

    Gaming complex of sawing

    As a rule, in the presented type of complexes, the high cost, however, the cost of the cost does not exceed several hundred rubles. Sometimes the necessary materials are available.

    Necessary materials

    Necessary materials

    So, for the construction of this kind of design, the following materials will be needed:

    • plywood thick no more than 10 mm;
    • polyethylene tube with a diameter of up to 12 cm;
    • Furniture metal corners in the amount of 15-25 pieces;
    • any natural rope, you can take a hemp or jute;
    • liquid glue without sharp smell;
    • Material you liked by your pet (you can find out by his favorite place for the night) for the lining of the house;
    • Tools for work.

    Master class on making a cat for a cat do it yourself:

    1. Drink from plywood 6 squares In accordance with the size of the future place to relax. In two of them Make round holes - main input and black .
    2. Connect the walls of the dwelling among themselves In the semblance of Cuba, using furniture corners. Before attaching the item with a hole of the main input, we will use the material house inside. The material should also lay a layer of foam rubber. Attach "Login".
    3. Use the pipe to create the observation deck. Previously, it can be cooled with glue, and then it is close to the rope tightly.
    4. Cut square or rectangle In accordance with the sizes of your pet To create an observation deck . Object it also with the material, pre-laying the foam rubber.
    5. Attach the viewing area Using the corners to the pipe.
    6. Pipe attach to the roof of a cot , Which can also be pre-closed the material outside, but without foam rubber.

    This model of the house is simpler and goes as a basic option. Of course, The owner can improve housing for his favorite in accordance with his preferences. . Sometimes an additional suspension for the game is attached at the bottom of the observation deck.

    This option is possible, but only in the case of fixing the entire design to the floor, because the unstable house in the game process can be turned over, which will lead to injuries of the four-legged pet. Think over everything carefully and with the likelihood of possible unpleasant excesses.

    2. From the box

    If there is some extra box in the house, you can show fantasy and construct Cardon house Alone.

    For some simplification of construction, use the box of suitable sizes so that your favorite does not have closely in it. You can enjoy the case of children. They will be interested to feel like builders.

    Cardboard Cat House

    Cardboard Cat House

    So, for the manufacture of a house for a cat will be required:

    • A box with a fairly dense cardboard (you can use the package of "Russian Post");
    • carpet or other dense, but soft material;
    • any water repellent material;
    • acute knife;
    • adhesive adhesive;
    • pencils, rules and other markup tools;
    • Wide scotch.

    Start making a house for a cat from cardboard in the following sequence:

    1. Make marking of the main entrance and black stroke with a pencil and circula. Cut holes. Let the main entrance be a big sizes than a black move. But remember that your pet should easily slip through it.
    2. Clean your scotch all edges of the box that open and promote the role. For consumption of persuasiveness and protection, you can skill with a tape entire box.
    3. Further Cut pieces of water-repellent material in accordance with the sizes of the walls of the future house . Carefully make them through the "entrance", lay out, gradually gluing them with glue to the walls. It is better to use glue for a hot procedure, especially if you have already walked all the walls with scotch.
    4. Separately Clean the water-repellent stool material of the collected box so that the pet is warmer.
    5. Now you can proceed to the external finish. Cut pieces of carpet in accordance with the sizes. The front wall with the entrance is cut off with a solid piece, glued and then, after careful drying, the hole for the entrance is cut. The hole is cut with a margin of approximately 1-1.5 cm for bend inside. Candle the edge of the carpet diagonally and stick it, "locating" inside the house.
    6. Give the house to dry at least 3 days. After time, put the pillow in the house and call the cat for rest.

    Similar options for independent manufacture can be somewhat improved and modified. Some prefer to glue the cardboard in accordance with their designed design. Here is often a multi-room or multi-level structure, which is easy to achieve with cardboard and scotch.

    Labyrinth of boxes

    Labyrinth of boxes

    3. From newspaper tubes

    Masters of weaving from newspaper tubes Create stunning work, not forgetting about your pet. So, with the help of an unnecessary stack of various paper waste paper, you can create a beautiful structure where your favorite will be warm and cozy. The following materials will be required here:

    • PVA glue;
    • scissors;
    • knitting needles;
    • Stack of newspapers;
    • Paints or varnish (optional).

    The house for a cat from newspaper tubes is as follows:

    1. Cut the newspaper for billets with long strips with a width of about 7-12 cm. Make every strip tight on the knitted needles, hooking for one edge. You will have a long newspaper tube, the end of which should be glued with glue so that it does not break.
    2. Weaving begins with the bottom of the future cat's house. In the center we make a crossroads, and then gradually turn it into the disk.
    3. Further, on the edges, fix the tubes on which the main frame of our wicker house for a cat will hold. First you need to walk all over the diameter around the bottom to make sides of the bed.
    4. In the next step, we will raise the cocoon, gradually increasing the mass of the tubes on the back wall.
    5. Those vertical newspaper tubes that have already come out of work, we still do not touch - leave stitch up. At the final stage, we will braid them in a beautiful pigtail to beautifully arrange the Koshkin House.
    6. The house can be covered with paint and non-toxic varnish. Be sure to check if there is no harmful components in the varnish! Cats often love to have fun with their houses and sometimes nibble tubes to sweat the teeth.

    House for a cat ready. Inside the pillow should be put so that the pet is comfortable.

    See in this video. More details, how to soar a house for a cat from newspaper tubes.

    4. From Foroon

    Soft house For the cat, with their own hands requires separate attention. Here you can not only create a comfortable and warm corner for a pet, but also to show a fantasy with decoration and in the process of designing a house. For the manufacture of such soft facilities, materials will be required:

    • any dense fabric, you can take contrasting shades;
    • Porolon, preferably thoroughly so that the cat is gently and cozy;
    • sewing machine;
    • Pins and other sewing parts for fastening;
    • Threads.
    Soft house for a cat

    Soft house for a cat

    To sew a house for a cat with your own hands, do the following:

    1. Describe the design of the structure, "sawing" to composite parts, each of which should be transferred to the newspaper or paper - it will flow the future pattern.
    2. Transfer them to fabric and foam rubber. Taking into account the allowances of 1-1.5 cm cut all the details: each pattern accounts for one piece of foam rubber and two of the fabric.
    3. Fold all parts in the sequence: foam rubber, top fabric face up, on her fabric face down.
    4. Purge all the edges of the typewriter, leaving the bottom edge, which will serve as a joint to the floor.
    5. Remove all the details, straighten the corners well and join the seams with an iron.
    6. "From the inside" of the house Sew all the components of the typewriter, the latter is sewn. Remove the whole house by giving it the necessary form.

    On this, the manufacture of a soft house for his favorite is over. You can experiment with flowers, making up a blank from distinctive shades.

    In this video will show how to make a soft house for a cat.

    5. Wooden

    Construction of a wooden house for a cat with their own hands assumes the existence of work skills with wood and other tools. It can be used at home or install on the street like familiar booths for dogs. Of course, this is necessary only in the warm season.

    House of plywood

    House of plywood

    To begin with, it is necessary to design the entire design and make blanks from the boards, pre-echriving them.

    Some masters make such houses using wooden plates, which allows you to create quite interesting and somewhat complicated structures. So you can meet Street house For a cat with a staircase, a veranda, carved roof and other attributes like an old Russian hut.

    Street house Boxdogru.

    Street house Boxdogru.

    From the inside the house is covered with water-repellent material, and then processed outside protective against rot and mold formation. Here you can handle the entire house with Olifa, varnish or just paint paint, creating an unsurpassed design.

    After all chemical solutions are weathered, you can lay the cushion and call it on the housewarming.

    Wooden house for cat

    Wooden house for cat

    6. Built in furniture

    Enterprising owners of what will not come up with, and often adapt already existing furniture for cozy asylum .

    You can turn into a feline house with the following furniture items:

    • Tumba or small locker (bedside), cutting a hole-pass in the door;
    • The sofa, attaching cardboard or tissue-tunnels to it, or put on the side of the shelf with a sunbed;
    • Bookcase, attaching a staircase so that the cat could get to her before the top and there is hiding there;
    • Table or chair, securing a tissue soft hammock under it;
    • table by making an additional lower shelf with a sunbed, pillow;
    • open shelves of cabinets, setting on them sun beds or low baskets, boxes;
    • Shelves for colors, rejecting the bottom shelf for a pet, and the top for flowers.

    For such transfigurations, uncomplicated tools will be required to be in any house:

    • Scissors, needle with thread;
    • hammer, nails;
    • screwdriver, screws;
    • Lobzik (manual or electric);
    • glue, stapler for furniture.
    House for a cat from a chair

    House for a cat from a chair

    7. Wigwam do it yourself

    Fresh and provocative looks Vigwam's house . At home, it is possible to build it quickly and easily from cardboard or fabric.

    Wigwam for Cat from Cardboard

    Wigwam for Cat from Cardboard

    The following materials will be required:

    1. Rods or branches 6 pieces - Frame base. The upper ends are fastened together, the lower parts are widely placed in different directions for stability.
    2. Scotch or rope - To secure the rod.
    3. Cardboard - Rodyshko Wigwam. A hexagon is cut and covered with a cloth (the best water repellent).
    4. Glue or needle with thread - To fasten the fabric.
    5. the cloth - Covering into 6 isced triangles, in one of which is made a slot for the entrance.

    Parts of the material are crosslinking among themselves so that in the seam between pieces of fabric it was possible to insert a rod. The frame is inserted into the stitched tent, and the lower edges of the material are sewn to the bottom of the cardboard base.

    Wigwam for cat fabric

    Wigwam for cat fabric

    8. Kogtetchka

    Kogttechka is an important and necessary attribute, it must be used from the first days of the appearance of a pet.

    It will save furniture and walls in integrity. The exact claws, domestic loves thus processes them, retains in full combat readiness.

    Cattakers for the cat

    Cattakers for the cat

    REFERENCE. The claw point is also associated with the game and the removal of stress through physical exertion.

    And in this video, you can get acquainted with one way to make a catbathing for the cat with your own hands.

    9. Lena

    Lenhing for the cat It can be made of cardboard, newspaper tubes, foam rubber. The form of this place for recreation is selected in accordance with the size of the cat or its preferences in the rest.

    Lenhing for a cat from an old sweater

    Lenhing for a cat from an old sweater

    Some are preparing laying the similarity of the existing interior in the apartment. The main thing is to provide your favorite and warmth. Therefore, do not forget about the use of foam rubber, soft tissue and other textile materials.

    Soft Fabric Lena

    Soft Fabric Lena

    10. For kitten

    The kitten's house is also needed as for an adult cat. Here It is better to build a real game complex , if possible, completing it with soft attributes - a place to relax and overnight.

    Also for the kitten you can build ordinary House-sleeve which is attached to the wall at a small height from the floor, so that the kitten can climb it yourself.

    House-sleeve for kitten

    House-sleeve for kitten

    Large and laborious in the manufacture of wooden structures are better not to apply.

    At first, The house for the kitten should not be "on the grow" . Otherwise, the little cub will not show interest to him, because he will be uncomfortable in it.

    Secondly, after a few months there will have to build a new home that requires a lot of time and effort. It is better to give preference to weaving their newspaper tubes or cardboard blanks.

    The first house for kittens is usually a big box in which they appear on the light and contain the first month of life.

    Simple house for kitten out of box

    Simple house for kitten out of box

    Instructions for creating a cotton house contains the following steps:

    • take Cardboard box , for example, from vacuum cleaner or microwave, the main thing is that it is high enough so that the kittens do not jump out of it;
    • Show bottom with water-repellent material , for example, glued and tissue, or ordinary children's absorbent diapers, as the baby still has to learn to go to the tray;
    • If his mother lives with a kitten, then the entrance for her is cut in the house , at such an altitude, so that the baby can not bother to him;
    • make a roof - from fabric or cardboard (just fix on the stationery clips).

    Another option of the first shelter can serve Shoe box - In her, a small pet will like to sleep and hide. She will serve as long as the crumb will grow up. The bottom covers with a soft cloth, the cover does not close.

    The next place of rest can be Soft Lenhing Or Pillow .

    Soft Lenhing for Kitten

    Soft Lenhing for Kitten

    The main difference between the children's house from an adult is a small size and short service life First, because the animal is growing, and secondly, the kittens still do not know how to go to the toilet in the tray, which leads to the dissent of the same cardboard.

    House for a kitten from an old suitcase

    House for a kitten from an old suitcase

    Do not forget to take care of the absence of drafts that are so dangerous for the baby, especially in the cold season. In our separate article, we will tell you how to adjust the plastic windows for the winter.

    Conclusion

    Each cat is individual, has its own character and its own characteristics. This applies to the selection of a house. To please your pet, you need to study his habits and preferences, and, based on them, choose which structure it is better to build. Building a house for a cat with your own hands is not only a technical process, but also a cheerful occupation that unites the whole family.

    Where to install?

    It is very important to determine the right place location of the house. It should be absolutely safe for animal place

    It is worth avoiding the sections of the flooding. The optimal option is to build a building near the heat pipe. So the cat will have an additional heat source. You can put a house under the roof - it will save the material from the early wear.

    If there is a dog booth on the site, and two pets do not get along, then put the cat asylum away from the dog. Thus, the cat will feel more safe, and the dog Lai will be less disturbing her. Try to hide the Konure so that it is not visible to the human eye, since there may be unfriendly among others. Put the construction as far as possible from the recreation areas, mangala, barbecue, pool.

    In the case when the design is built for homeless yard cats, it is important to negotiate with households about the possibility of installing the product. You can not put a house in the courtyard, try to negotiate the house responsible for the placement of the house at the local area, for example, on the lawn

    For this location, only the decision of the HOA and the agreement of the tenants of 1st floor, which will be built in front of the windows.

    Be sure to follow the cleanliness around the house. If you feed the cats nearby, then do not leave the packages from cat feed here, wash bowls, clean the products of life. These measures will avoid disagreements with neighbors who are opposed to cats on the territory of the house. If people are indifferent to troubles of homeless animals, people are still threatening to defeat your construction, make an inscription on it to show a compassion and reminder that thanks to the stray cats, the yard will be released from mice and rats that carry dangerous diseases.

    Old T-shirt tent

    Dimensions can be arbitrary. The most important thing is that the animal in it was not too close. A similar design with a wire frame can be easily transferred and put in another place.

    Cozy tent from t-shirt

    1Dine tents make a piece of dense cardboard or plywood. So that the cardboard base does not be fed, glue, or connect the scotch with each other 2-3 sheets.

    2nd the framework of the frame will be needed two pieces of thick wire. They will need to bend into arcs.

    We are using them between themselves so that the ends are located in the same plane. The upper part of the frame, in the Crosshair area, fasten the scotch.

    4The joining the frame to the bottom of the house is done in the corners of the cardboard or plywood blank four holes. From the edges it is necessary to retreat 3.5 cm.

    5 Climbing the wire into the holes of its ends must be bent on the back side of the bottom and consolidate them with scotch.

    6 Supplies of the house will serve the neck of T-shirts. The lower part and the sleeves are separated. It can be simply sewn by hand, but since the T-shirt will be needed periodically to wash, it is better to fasten the bottom pins under the bottom of the house.

    A 7-minded tent for homemade favorite can also be sewed from felt, knitted or other types of fabric. Make a pattern from the newspaper, applying to a wire frame. When plotting, be sure to leave the seams.

    How to make houses for a cat car

    What do you need

    • Plywood;
    • Electrolovka, saw or other tool for cutting;
    • glue "moment";
    • nails;
    • a hammer;
    • Screwdriver with a grinding nozzle;
    • brush;
    • black paint;
    • sandpaper;
    • Wooden varnish.

    How to do

    1. To square pieces of plywood from all sides, glue low sides.

    YouTube Channel Workshop Tree

    2. Drink two identical walls and two pentagonal parts. On one of them drink the door. Spread the details so that the walls of the house are turned out. For reliability in some places you can kill the tree with nails.

    YouTube Channel Workshop Tree

    3. Turn the first structures down design. Stick to this base wall.

    YouTube Channel Workshop Tree

    4. Make the roof base: on both sides, insert two long rectangles between triangular figures. If you put a house right, these rectangles will be tilt.

    YouTube Channel Workshop Tree

    5. Drink a lot of small rectangular details from plywood. Lubricate the roof of glue and rows to put "tiled" of these pieces on both sides. In the middle, close the space between the two parts of the roof.

    YouTube Channel Workshop Tree

    6. Squeam the edges of the "Tiles".

    YouTube Channel Workshop Tree

    7. Drink and glue such doors as shown in the photo. Place them on the sides of the inlet.

    YouTube Channel Workshop Tree

    8. In front of "Tiled" attach two wooden strips glued together.

    YouTube Channel Workshop Tree

    9. Make vertical scubons on the roof.

    YouTube Channel Workshop Tree

    10. Black paint paint the roof. After drying, go through it sandpaper. Laco cover the rest of the house.

    YouTube Channel Workshop Tree

    11. The author of the master class added a large branch to the house and a multi-tiered cat seat. If you want to do the same, follow the instructions from the video.

    YouTube Channel Workshop Tree

    What else there are options

    Laconic house with a rounded roof:

    Horse in the shape of a hexagon:

    The raisin of this house is in an unusual inlet:

    And to this construction, the joy of fluffy, attached scraper:

    Simple options for Domikov

    The most simple houses for cats are secluded places where the animal can relax from the care of the owner. It can be hammocks, beds and bedding, located in the distant corners of the apartment. Hammock, for example, you can attach to the legs of the chair, where the cat will not be exactly disturbed. It will not only deliver the joy to your favorite, but also save space in the house.

    Lena - another simple and cheap type of space for kitty. They must be soft, warm and natural, as synthetic materials are electrified, and they do not like the cats. Having received a discharge of current once, the second time your pet will not come closer to the subject, because these animals are very smart. Lena can be in the form of baskets and mattresses, in the shape of hearts and just round, ordinary and with sides. If your kitty has become a mom, then such sides will allow you to keep kittens near the cat so as not to unwind her.

    Cardboard houses, closed on all sides and having one or more holes for the entrance and exit, will become a personal space for the cat, in which a person can invade. Such houses are well passed air and close the cat from light and extraneous eyes, creating an illusion of a closed space. As practice shows, this option is the most beloved in fluffy pets. What kind of cat did not get into the box, as soon as shoes, a coffee machine or another purchase took out of it?

    Types of Domikov

    There are many diverse houses for representatives of a feline family - soft, hard, solid, collapsible, outdoor, suspended. Not all products are similar to a cat dwelling, some have such an intricate original design that they seem to be an integral part of the home interior.

    You can make easiest facilities yourself - from cardboard shoe boxes, tissue residues, carpet, old furniture, vines, specially treated newspaper tubes.

    Lena, hammocks

    A hammock for a cat is a soft product that is stretched anywhere, fastening on loops, buttons, velcro, strings, carbines from four sides. There are options that have a solid base - they are suspended under the table, chair chair, in the corner of the room, saving space. But patients, weak, just thick animals often experience difficulties with jumping into a hammock. Lenhing - economical, easy way to highlight a convenient place to pet. In shape it happens square or rectangular, like a box, round or oval, as a basket, heart-shaped, flower. The standard version consists of a stand with a mattress, has low-sidelights.

     

    Domoki-booths

    Cat Booth is an interesting, convenient option suitable for the simultaneous placement of two animals. The roof is made flat, it is against a plush, another soft cloth. One of the sides of the construction is equipped with a clawed, less often - ladder on the second floor. The mattress is put inward, a favorite toy. There are angular versions, upholstered with artificial fur.

     

    Built in furniture

    To create such a structure, it is not necessary to change something in the interior. The old bedside table with a round hole in one of the walls will be excellent housing for a cat, a whole cat family. From above, the design is relaxed with a furniture cloth, which is convenient to sharpen claws, and the layer is also placed. Something like it turns out from the old chair, the stool, covered with dense textiles, with a cutting window. Wooden frame from the Soviet TV will also suit.

    Mini Cat Furniture

    It is sofas, cribs, deputies, chairs, similar to real, but in size a little larger than doll. It can be a uncomplicated couch, a luxurious bed with a porch, canopy. Textiles for finishing is chosen durable, well, removable covers are also acceptable.

    Cardboard House Designer

    A handsome, interesting option, but the short-lived - at the rolling beast he will quickly come to complete disrepair. In appearance, this may be a tent, Wigwam, Palace, Teremok, Carera, Skyscraper, a miniature copy of the owner's dwelling, etc. Cardboard - warm material, the price is low, the product is cut, folds according to the lines specified in the instructions.

     

    Wall-mounted options

    Wall design significantly saves a place in close room. All cats love to climb higher, because it is the best option. It has a kind of soft bed, fixed between two crossbars, shelves, a shaft textile material, artificial fur, pipes fixed on the battery. A high shelves can be made high on the wall, which leads a narrow ladder, as well as a multi-tiered corner house.

     

    House with a game complex

    This feline entertainment complex is purchased, manufactured independently, if more than two cats live in the apartment, private house. Here they will relax, play, communicate. The house is equipped with several venues on racks that perform the role of brakes, ladders, hammocks, lazalts, toys, chatting on the ropes, can have a kind of rack, a cloth.

    Cardon house

    Of course, you can not break your own head and make a house and from a cardboard box, cutting into it holes for doors and windows and throwing a litter on her bottom. By gluing a few boxes with each other, you can get a dwelling from several rooms and even a multi-storey house.

    But such a structure will quickly come into disrepair - because it can quickly break and even "eat" during the game.

    Just dwelling from cardboard

    Nevertheless, it is better to make a more durable structure with walls of the cardboard sheets glued into several layers. Moreover, with a high-quality finish, he will look no worse than the store product.

    The first invented to do for cats dwellings in the form of hives from corrugated cardboard craftsmen from Japan. Today there are such structures and on sale. But we will make them yourself, listening to the wishes of your pet.

    To begin with, we define what form and sizes will be a cat housing. If a domestic cat or a cat is still young and full of forces, it will be more logical to create a multi-storey design with shelves for climbing or attaching a real tree with a multitude of durable branches next to the house.

    For a cat-respect, loves to dare almost around the round day, a soft and convenient single-storey building with a cog-contained attached to it will be suitable. The principle of assembling a house in any case will be the same.

    Yurt house

    We describe how to make a simple house for the cat's cat in the form of a circular yurt or a rectangle from the glued layers of corrugated cardboard.

    1 Cardboard with rings or stripes and connect them with a stack of PVA glue.

    2nd to ensure the stability of the design cut out the bottom of plywood, fiberboard or chipboard and stick it to the ready-made house.

    3C help corrugated cardboard You can make not only a house, but also a couch, a sofa or a bed for resting your cat. Some kote owners are managed to construct from corrugated cardboard even quottechki. But the term of their life is small. Plus, garbage will always be formed around it - even tight paper will be too fast under the pressure of feline curls.

    4 Sir from multi-layer cardboard will be necessary for an animal in the shower. After all, a solid base will be quite warm, and the walls are perfectly protected from drafts.

    If you decide to paint the dwelling for your pet, use resistant dyes for these purposes. After all, the gouache or watercolor is unsafe - an animal after the mucus of a poisonous composition from a fur can seriously get sick.

    How to equip?

    A feline house can be made even more comfortable by adding several additional elements to it.

    • With a big bed, soft decorative pillows of small sizes are perfectly combined. They will give additional soft surface lying beds, and can also serve as decorative elements.
    • To improve the dwelling of the pet, the hammock must be sewed in advance from dense tissue, equip loops for fastening, as well as mount the fasteners into the body of the sun beds.
    • If you want to make a soft tunnel, you need to create a frame of round rods and to strip it with a cloth.
    • Also as an additional part it is appropriate to use hanging toys.

    Classification

    All variety of cats for cats can be classified by several signs that affect the comfort of the pet and the purpose of the product for specific representatives of the Feline family, since some of them have their own characteristics of the size, form and features of the body.

    In size and form

    These are two basic signs that significantly affect the consumption of materials and the price of the product. Allocate the following structures.

    The column decorated with cloth for sharpening claws on a round or square base. This is the easiest variety of products with braketop. The pipe itself can be both round and square shape with smoothed corners.

    By type of fastening

    Material for sharpening cat claws can be attached differently to the surface. Allocate the main 3 types of fastening.

    Outdoor - it is this option that takes the greatest popularity. A vertical pillar, placed by a special fiber, is put in the most convenient place of the apartment. Its height should correspond to the size of the cat, otherwise the animal will be inconvenient to sharpen claws. This option is not very ergonomic, also a pet can move such a column from place to place as it is used.

    By type of materials

    The following raw materials are used as the main materials for creating a cottage house.

    • The frame of the closed compartments is made of wood. As a material for walls, a wicker from a vine is sometimes used, providing additional ventilation.
    • To create the shelves, the plywood is used.
    • As raw materials for upholstery, such options like artificial fur, plush, carpet, upholstery fabric are popular.
    • Kogtetochka is created from Sizal, Jute, flange rope.

    Materials required for a house

    To make a feline house, a small skill will be required, fantasy and droplets of hardworking. For a small dwelling of the four friend in a complex with a clawed and a kind of crib, you will need:

    • LESS LED 61 centimeter long and 44 centimeter width (it will be a roof),
    • 54 centimeter chipboard sheet and 44 centimeter width (it will be walls),
    • Fiberboard sheet 122 centimeter long and 40 centimeters width (base)
    • Rake 3 on 4 length 37 centimeters - 7 pieces
    • 60 centimeters long pipe and 11 millimeters diameter
    • Two bars to improve the stability of the bed.

    For a crib or burdock, you will need:

    • List chipboard 44 centimeter long and 30 centimeters width
    • Fiberboard sheet 44 centimeters and 30 centimeters width
    • Poropolone 44 centimeter long and 30 centimeters width

    For the manufacture of brates you need:

    • Two ropes 15 meters long and 2 meters
    • 41 centimeter long board and 18 centimeters width

    Tools and additional materials that will be needed during the work on the house:

    • Drill or screwdrut
    • Adhesive Pistol
    • Material for tosing a house (fur, cloth)
    • Knife
    • Scissors
    • Sandpaper
    • Roulette
    • Marker
    • a piece of chalk

    Roof house

    For this, the upper part is placed, and the rails that are located at the bottom inside the design are closed. After the finished house is attached to the base, pose the self-size self-size.

    So that the pipe placed inside has been stable, it is fixed with wooden panels on both sides. They are attached to the self-tapping screw or glue.

    To improve the laying from the chipboard, semicircular parts are cut out, which are rolled onto the pipe. After the vertical position is defined place to accommodate brates, the pipe can be connected to the base of the house.

    The bed itself is squeezed by foam elements and a selected cloth. The pipe is winding with a jute or a sisala rope, which are attached to glue.

    Cogttechka for kitty from the edges is rummaged, and the middle is better wrapped with a rope. Next, the board is mounted in the top to the house of the house, and below the base of the construction.

    Finally

    It is difficult to find a family in which there would be no cat or cat. These are unique animals that for thousands of years live next to a person. Their task was to protect the housing of a person from rodents. Nowadays, cats contain both in private houses and in the conditions of apartments as a pet. If in private homes these animals spend a lot of time in the yard, then in the conditions of the apartment, this is a real problem. Despite this, the animal must lead a moving lifestyle. The solution to this problem is the creation of a cat's corner, where the animal could not only relax, but also play, having moved from the floor to the floor. Here you can swing claws so that you do not have to shorten them with the help of rods.

    Gaming Complex with Kogtetchochka

    Of course, if you do a similar cat complex from girlfriend, then it will not cost anything, but if all materials buy, it can cost a lot of money. Expensive will be the option if you purchase such a corner in a specialized store, although it will look like such a corner more attractive for the owner. Unfortunately, this option may not like animals, since their production is associated with the use of dubious materials. As can be seen from the photo above, the solution options are a huge set and any of them can be taken as a basis. As life shows, it's all about the desire to provide your pet with normal living conditions. These animals will never remain in debt, as their love for their owner and family members are limitless.

    Made an unusual home for his cat

    Watch this video on Youtube

    As a rule, cats or cats prefer places for their holidays located in the cabinets, under beds, under the blankets, etc. It can not like the owners, as they scratch wallpapers at the same time, as well as the upholstery of the furniture. If you make a house for an animal, the more correct, then this place will like the cat or cat, and then it may be their favorite holiday destination. As an option, a feline corner can be purchased in a pet store, but it is permissible to do it yourself, given the specific conditions. To do this, you may need a minimum of time and materials.

    Select option

    Making a house for a cat or a cat will not be much difficulty, it is enough to take into account a number of factors that take into account the behavior of the animal. If the problem approached formally, then the house can be done, but it will just take the place and fall dust. First of all, you should watch the animals to determine where the cat or cat loves to relax. Most cats prefer to climb height, hoping in a secluded place, although there are such that they are resting simply on the floor. In this case, much depends on the breed of an animal.

    At the beginning you need to decide on the choice of design

    Approaches to design design

    Not all cats and cats behave equally, so the approach can be purely individual. For cats, it is characteristic of two strokes in the house, which is associated with the evacuation of offspring in the event of a danger, although many owners castrate in a timely manner or sterilize animals. To build a house, you can use pipes or other facilities like a similar purpose. At the same time, they do not like wide opening, as it leads to a sense of danger. In this regard, the entrance to the house should be narrow to so much that the animal can get into it freely. Most cats prefers height, and in houses on the floor they can live with their offspring. If cats have no offspring, they will choose more house, located at some distance from the floor, although, as mentioned above, everything is clean individually.

    Cats prefer the upper floors

    Cats will definitely choose a place higher, with a good overview, as they love to watch what is happening around. They prefer to be on the venues and they rarely be seen lying in the house. For a cat, it is important that there are many sites, and such sizes so that the animal can lie on them in full growth. Such areas can not be fencing because the cats feel comfortably at the height. Fencing if they make the owners, then more for their calm, and they are not needed by cats.

    Place for cat.

    If the cat has no offspring, then cats are not less than cats love to be located on the courts and watch all that happens from the height. It should not ignore the desire of the cat, like a cat, sometimes retire and relax so that no one bothers them. It should be noted rocks that are not obsessive in their behavior and try to retire. Therefore, the house is needed like a cat and a cat.

    Adding some elements

    Under the concept of "Cat House" should be understood as a whole complex of elements with platforms and other useful additions. As a rule, animals choose the plots for themselves, and some of them appear quite rarely. It is quite difficult in advance to determine which of the sites will have an animal on moral, therefore, it is necessary to build a whole complex.

    As an additional, but very useful elements in a feline complex, brakes and lazaltles. Kogtetochi represent vertical surfaces, wrapped with ropes from natural components, and lazal rubber is horizontal and inclined surfaces intended to move the animal to move between different levels of the complex. By the way, the scramatists are also used by animals to climb on top tiers or sites.

    Hammocks and claws

    A hammock is another element that does not hurt in a feline complex. It represents a rectangular segment of the fabric, which is attached to two crossings. You can make a frame hard and climb cloth to it, after which the frame is attached to the base for 4 corners.

    Alternatively, it is permissible to hang toys on the ropes that animals simply adore and can play for hours.

    Cats just adore pipes that are sewed from the fabric. In order for the design to be rigid, the wire is inserted around the perimeter at the end of the pipe. One end of the pipe should be raised to some height, and the second is left on the floor. At the end of the pipe should be clearance, and otherwise the cat or the cat ignores such an element. In the pipes, animals can spend a lot of time because they feel like hunters in the ambush.

    Fabric pipes

    Few know that cats and cats really like it, if you take clothing brushes and secure them on the vertical surface, somewhere at the level of the animal back. Cats and cats simply adore these surfaces consisting of artificial bristles of medium stiffness.

    At what height

    For any cat or cat, the higher the place of rest will be located, the better because in such conditions they feel safe. Therefore, in such cases, the cat's house can be positioned at least under the ceiling itself. Regardless of how many tiers will be in this complex, mostly the uppermost one will be busy. If the cats are somewhat, then on the highest "floor" will be located the leader, but despite this, this "floor" will remain for animals controversial and each of the cats will want to take it first.

    Place under the ceiling

    It is believed that the smallest height of a feline corner is one meter. A small height turns out to be safe even for small kittens, but with age they still move into higher tiers when they feel that they are capable of it.

    Options for walls

    The optimal option is to arrange a place to relax on the wall, because on the floor it will be able to take about 1 meter square. Given our apartments, where every meter square on the account, the place for the cat on the floor is quite problematic, but it is not a problem to place it on the wall, it is enough to consolidate it, as it should. Plates can be fixed somewhat and combine them with transitions from boards, placing them at various angles. Alternatively, you can use rope stairs, which will certainly like the animal. In other words, there is a huge field for fantasy, but at the same time you need to have a desire.

    Wall-mounted options

    Such elements are also called shelves for cats, as they have enough similarities with shelves for books, since their fixing is identical. Cats and cats with pleasure exploit similar cat complexes.

    From which materials

    The house for a cat or cat is usually done from the remains of building materials or other elements that are no longer needed. It is quite acceptable, since all elements of the design have to be sewn to the cloth, any other textiles or revolt with ropes. Despite this, a number of requirements are presented to such materials.

    Concerning:

    1. They should not have extraneous, especially sharp odors. In any case, living in the house should not feel it, but animals and even more so, since they have a lot of sharper. If these are natural smells, then they are allowed. If any material still has a bad fragrance, then it can be held on the street for some time.

      Not harmful materials

    2. Do not use materials that have the property of accumulating electrical charges. These include open surfaces from plastic, wool or silk materials. Animals are quite sensitive to electrical discharges.

    To create a cat or cat as quickly as possible to master this complex, it needs to hold it for a while in the dwelling. This is necessary so that the design has fully absorbed the aromas of the room.

    Main materials

    A feline complex may consist of several elements that are made of various primary materials. Therefore:

    • The house can be made of plywood, chipboard, thin boards, weavers from rods, from newspaper tubes, etc.
    • Vertical and inclined elements are manufactured:
    • From plastic pipes for sewage, made of paper pipes that can be placed in a tree trunk, in a wooden bar or wrapped with a linoleum segment.
    • From ordinary boards, chipboard or tissue, placing them at various angles.
    • Hammakes are made of fabric, from rope, and a regular wooden rail is used as a frame.

    Places are made of wood, chipboard, plywood, etc. If the platform is made of wood, then it can not be sewed to the matter, but you will have to polish, as well as to cover water based lacquer. If the material of chipboard or plywood, then it is better to enter into fabric, since chemical components are applied when they are manufactured.

    Tree and plywood sites

    As the basis of the feline complex, it is permissible to take the trunk of the tree, but it does not need to remove the branches completely, leaving them part in order to fix playgrounds on them, a house and other elements. For this, a tree trunk is taken, about 2 meters high, after which the branches are cut off so that there are 20-30 centimeters. After that, the bark is removed from the barrel. Such a complex for animals will be particularly interesting because it is distinguished by a natural basis, but it does not need to forget that it needs to be well strengthened.

    Material for trim

    In order to get a bracetop, it is enough to wind a thick rope from a natural material, such as hemp, for example. If the complex is not from the tree, then it will have to wrap the rope completely, so it will take enough enough.

    To see the houses and shelves, you can take advantage of such a dense material as carpet, while you should not take a carpet with a long pile. Long pile contributes to the rapid harness of dust and dirt, together with animal wool. In turn, this can serve as an allergic reaction, both at the cats themselves and in living.

    Cross carpecline

    The color of the upholstery does not play any meaning, especially for cats and cats, but for the owner, this is an interesting question, since the best option is a combination of the color of the cat complex with the interior of the human dwelling.

    Fastening

    The most important thing is that the design is absolutely safe for the animal. All fastening elements must be secret, and if necessary, they are smeared with a putty or weave with a cloth.

    Cat Lazacks with playgrounds

    No less important is to securely secure the entire design, especially if it enjoys not one cat or a cat. Their games can lead to the fact that the whole design can fall and what it is higher, the more such a chance.

    Example photo with dimensions

    To understand how much space can take a feline complex, it is enough to look at the ready-made drawings with sizes. After that, you can proceed to the design of a feline house. It must be borne in mind that cats are of different breeds and may differ in size, although not significantly. The design of the house also depends on what a useful area must be sacrificed for a pet.

    The photo shows that the height of these designs is within 1 meter of 80 centimeters, and even above, although it is not critical and you can easily remove extra centimeters with the floors. These drawings can serve as a good basis for building a house for their cat. On the basis of the existing drawing, you can proceed to the preparation of all necessary materials, after which you can start assembling this structure.

    Step by step making complex for two cats

    When the owner contains two cats, it is necessary to build a house for them, taking into account their behavior, and so that they do not interfere with each other. The behavior of cats may be different: some cats are friends and easily get along on the same platform, and there are cases when one of them dominates. In this case, it can be assumed that one of them wants to take the most comfortable and highest place. If the cats are not friends, then the platforms are better spread, and if you are friends, you can build one common, but the large platform on the very tip of the structure.

    Materials and ready-made house

    For this design, a plywood is suitable, thickness up to 12 mm, as well as pillars from a wooden bar with a size of 50 to 70 mm and a length of at least 4 meters. You will also need carpet on a jooty basis, about 2 and a half meters square and a rope, up to 20 meters long. Corners are suitable as a fastener, with a side of 15 by 20 mm for a house and 40 per 45 mm for fastening sites. For mounting to the wall, you can use a pair of large corners, 50 per 50 mm sizes.

    Fastening the main elements

    As a basis, a design is taken, consisting of 3-poles of different heights: 220 cm, 120 cm and 80 cm. The pillars are securely attached to the base, which is plywood. These carrier elements are placed in such a way that the longest is as close as possible to the wall to securely secure the entire design. Placing the columns is noted directly on the plywood sheet with a pencil. Poles can be fixed with long nails scored from the back of the sheet, but first for them the openings of the corresponding diameter are drilled. For reliability, the pillars are fastened with the help of metal corners of the appropriate value.

    Marking

    By the same way, the holes in the platforms are noted through which pillars should pass. Holes are better to do a little more than the sizes of the posts, as they are still fastened with the help of the corners. If the holes are somewhat smaller, then they will be additionally necessary to process either with a file or a jigsaw or emery paper.

    Fastening platforms

    Before fastening the platform, it should be done and, if necessary, it is adjusted in size. It is desirable that the platform, and all other elements, is fixed strictly horizontally. To do this, you can use the construction level. For reliability, the platform is attached using the corners. After that, all platforms are trimmed by carpet, and it is also necessary to do this, otherwise the animals will lead it from the ground.

    Build house

    The house of the house is collected from 4 rectangular plywood segments that serve as the walls of the house, while in one of the rectangles, cut the hole so that the cat can crawl into it. For the floor and roof, another rectangular segment is cut out. To connect all the elements of the house, it is enough to use small metal corners and screws. The fasteners should be so that none of the elements, the more sharp, did not go out, although many of the fasteners will be under the trim.

    Assembling shore

    The most important thing is not to forget to climb the house from the inside, after which you can fix the roof, which is also trimmed with the same material. The finished house is attached, at a planned place, with the help of the same metal corners, as in the case of playgrounds.

    Walking pillars with ropes

    The last stage is the wrapping of pillars with ropes, which will serve for animals with cogtetchok. In addition, the elements of the design for animals will be more attractive. Before wrapped with a rope post, it is fixed using a bracket. Staples are also used for the intermediate fastening of rope, as well as for the final fastening. The rope should be hurred tight, otherwise it will weaken over time. That this does not happen, each round or somewhat is immediately sealed with a hammer.

    Winding pillars rope

    The construction of a cat for a cat does not take up much time and it can leave no more than half a day, although more complex structures occupy much more time. In the next video, you can see how the similar design is going.

    Cathouse in a few minutes

    The easiest version of the cat for a cat will not require a lot of time and many details for the assembly. Therefore:

    • It is enough to have a cardboard box of suitable sizes.
    • It will take the old T-shirt, as material for the trim.

    Do not do the same without scotch to secure the entire design. As for the tools, you can do the usual knife, but quite sharp, and scissors. The manufacture of such a house will select only a couple of minutes that can be seen on the video.

    A selection of photos of interesting cat complexes (houses)

    This section is dedicated to interesting decisions that are embodied in the designs of houses for cats, as well as entire complexes. It is not surprising that a person takes care of domestic pets, because, living next to a person for many years, they become family members. Similar structures deserve attention!

    A few more video ideas

    House for a cat Ryzhka with Kogtetechka and Periscope.

    The use of PVC pipes with a diameter of 100 mm to solve the problem.

    Finally

    It is difficult to find a family in which there would be no cat or cat. These are unique animals that for thousands of years live next to a person. Their task was to protect the housing of a person from rodents. Nowadays, cats contain both in private houses and in the conditions of apartments as a pet. If in private homes these animals spend a lot of time in the yard, then in the conditions of the apartment, this is a real problem. Despite this, the animal must lead a moving lifestyle. The solution to this problem is the creation of a cat's corner, where the animal could not only relax, but also play, having moved from the floor to the floor. Here you can swing claws so that you do not have to shorten them with the help of rods.

    Gaming Complex with Kogtetchochka

    Of course, if you do a similar cat complex from girlfriend, then it will not cost anything, but if all materials buy, it can cost a lot of money. Expensive will be the option if you purchase such a corner in a specialized store, although it will look like such a corner more attractive for the owner. Unfortunately, this option may not like animals, since their production is associated with the use of dubious materials. As can be seen from the photo above, the solution options are a huge set and any of them can be taken as a basis. As life shows, it's all about the desire to provide your pet with normal living conditions. These animals will never remain in debt, as their love for their owner and family members are limitless.

    For a comfortable stay in the apartment for a cat, it is recommended to build a personal apartment. The design should take into account all the needs of the animal. The construction is not universal, as each pet has its own temperament and habits. You can make a house for a cat with your own hands.

    Houses for cats

    Varieties of houses and step-by-step manufacturers

    There are many ideas, sketches for the construction of a cat's house. In the manufacture of the design, it is necessary to take into account the availability of free space in the apartment, pet preferences, room design, where the house will be installed. If correctly and with the mind choose a cloth for finishing, the form of the structure, it will decorate any interior.

    Lena and hammocks

    Lena is the easiest and easy way in the construction of a house. It is made in the form of a basket, boxes, stands with a soft litter.

    Lenhing from wool

    Depending on where you want to place a future bed, you can choose its form. It can be an angular (when placed in the corner), rectangular (if you want to put it on the window). Here we describe the option of making an ordinary oval bed. For an adult cat, the optimal diameter is 40 or 50 cm. But here, of course, look at your cat, if you have Maine kun or just a cat is quite large, then the size is better to do more. We recommend to measure your cat.

    Fabric Choose a pleasant touch and safe for a cat. Color You can take anyone as you like.

    We will need:

    • sheet DVP (need 2 pcs. 36x48 cm), you can take a thick cardboard;
    • Porolon (for the side - length 135 cm, width 10 cm, for the inside of 36x48 cm);
    • fabric or carpet;
    • thermopystole;
    • Stationery knife or scissors;
    • Roulette or ruler;
    • compass;
    • Threads, needles and pins.

    Step-by-step instruction:

    • To begin with, draw an oval on a sheet of paper. To do this, you can use the circus. There are a segment of 48 cm and divide it into three equal parts, two points denote as a and b. From both points we carry out circles with a circulation so that the edge of the circle is in the adjacent points. Over and under the intersection of the circles, the arcs are black, and we have oval. Cut it.

    SectionEffects oval

    Ready oval

    • We take our sheet of fiberboard or cardboard, put on them our oval and supply. Cut 2 identical figures.

    Oval from dvp.

    • Next, we make sides of the foam rubber. Bend it along the entire length and glue.

    Foreforg from Foroon

    We glue the side

    • After the foam rubbing it with a cloth, its width must be somewhat more, you can take 14 cm. Belt.

    Fabric for the side

    Glue and Bork

    • From the outside, we leave the free edge of the fabric and fix the side to the layer again with the help of glue. Ends of the side connect.

    Glue on ovale

    Fragic glued to oval

    Compound

    Frame and oval

    • Free cloth glue to the bottom oval. So that our Lena looks well and below, close it prepared by the second oval previously.

    Oval from below

    Second oval

    • Next, we take the foam and cut it in the form of oval. I slightly cut along the entire length, since the inner part should be slightly smaller. After it is wrapped with a cloth, making the allowances and fix them from the bottom side.

    Inside ovala

    Blue fabric

    • On part of the foam rubber without fabric, we applied glue and glue it inside the laying. Alternatively, you can sew two parts.

    Ready inside

    Cat on Lena

    Lenhing with their own hands
    Another option

    Hammocks are comfortable sun beds. They can comfortably accommodate the pet and relax.

    Hammock for cat

    A feature of the design is the presence of fasteners to which it is suspended in various places. It is recommended to make the basis of the hammock tough so that the animal was comfortable and convenient.

    You can even make a bed for a cat from your old sweater. To do this, squeeze its neck from the wrong side. Then position at the height of the cuts for sleeves, it will be a single side. It should be filled with insulation, and after sewing cuffs. Inside, too, put the insulation, but better a soft pillow, and squeeze. And here are step-by-step photos:

    Sweater as Lena

    Domoki-booths

    This is a closed design. The dwelling has a roof, upholstered with a soft cloth. In such a house, the pet can take a break from other inhabitants of the apartment. If the dimensions of the structure allow you to place the brake in it.

    Step-by-step manufacturers in front of you in the photo:

    House-booth

    Miniature furniture

    The rest space for the cat can be performed in the form of a sofa, chairs and other furniture items. The decor serves miniature bedspreads and pillows. To this bedroom, the pet gets used to very quickly.

    Sofa for the cat

    Luxury sofa manufacturing option for your cat:

    Sofa for cat

    You can make a sofa and simpler:

    Sofa stage 1.

    The sofa is almost ready

    Cardboard house

    You can not break your head and build a dwelling for a pet from a cardboard box. Pre-cutting in it input and windows, putting inside the litter. However, such a house will quickly come into disrepair (the animal during the games will bloom or cums it).

    How to make a cardboard house

    It is better to build a building with walls of several cardboard layers. If you do it carefully, the homemade dwelling will look no worse shopping.

    Cardboard house

    How can you make a step-by-step such house:

    Cardon house

    Part 2 of cardboard

    Multi-storey houses or game complexes

    The manufacture of such a design will take longer than the previously listed. It has enough space for all: stairs, brake, toys, etc. In such a house, the pet will always find himself, even in the absence of the owner.

    Gaming complex for kittens

    Original houses

    Any interior will decorate such original facilities for pets:

    • Of the two prisoners, connected in the form of pearls;
    • Stitched from dense tissue in the form of a cat: with ears, tail, hole in the form of a yawning mouth;
    • from wooden cubes (walls can be decorated with non-ferrous paper);
    • mini wigvam;

    Wigwam

    • in the form of a bowl made from the carpet (hole of the dwelling can be decorated at the edges of a knitted scarf);
    • Hanging fabric with a soft bottom, suspended in any place;

    Lenhing in bed

    • in the form of eggs with smooth and solid walls, thanks to the litter from the inside;
    • Vertical house with brakes on sides and sleeping place in the form of a cylinder in the center.

    From suitcases

    Built-in furniture / cabinet

    The home can be built on the chest of the chest, the cabinet, an unnecessary bedside table. From the inside the furniture is trimmed with a cloth, the litter is stacked in the middle. The house is better to install in a quiet place, not in the corridor. You can place it in the room where the pet is more often.

    In the closet

    House in the closet

    For small-sized apartments

    In small apartments you can build a hammock for a cat from T-shirts, towels or tight fabric. It is placed in any free place, including furniture. It is convenient to clean and wash it.

    The houses built into the furniture are also the perfect option for small-sized apartments. For several animals, a design with two-three floors, selected sleeping place for each pet is suitable. Such a structure will help save space.

    In the free place you can put an angular house. It will not occupy a useful space in the room. This design is manufactured according to individual drawings. You can install it in a stupid or sharp angle.

    Why the cat is a house

    An animal needs its apartments to relax from the environment of people, other pets, hide from an annoying child. If a pet has no secluded place, it will sleep where it fell: on the sofa, table, beds, etc. Own corner will facilitate the life of the owners, the loves will not interfere, leave their wool in unwanted places.

    Cardboard box

    Requirements

    Building for cats must comply with the following requirements:

    • The height of the design is as close as possible to the level on which the animal holds the most time (bedside table, chair, beds, etc.), but there should be no less than 40 centimeters.
    • There is no unpleasant smell of chemistry in the house, otherwise the favorite simply will not accept it.
    • The dwelling is suitable for the sizes of a pet, it should be comfortable in it (the size for the middle cat is at least 40 * 40 centimeters).
    • The structure must be durable, safe and stable.
    • The circumference of the entry into the design is not less than 15-20 centimeters.
    • For the cleanliness of the house you need to carefully follow.
    • For the manufacture of the construction used only high-quality, environmentally friendly materials, so as not to harm the health of its inhabitant (plywood, cardboard, concrete, cotton).
    • The dwelling is recommended to build a playground for games.
    • If the design is installed in the design, access to it should be free. Otherwise, the pet will sharpen claws about the wall, wallpaper, etc.
    • In a multi-tier house, you need to make an additional output. So animals shutd up their home in the wild.

    Differences of houses for cats and cats

    Cats and cats have different needs. Therefore, the dwelling should be different. The male will be comfortable on the roof of the house, which has only one entrance. For an animal, it is enough to have a safe shelter with a good overview.

    Hammocks from carpet

    The cat will be convenient in design with a spare output. The platform for the review is better not to do on the roof, but on a separate rack. Such preferences are due to the fact that the female house is also a shelter for offspring. Kids must be away from the "observation site". Additional strokes are needed so that the kittens can be saved in the event of an attack on the home.

    Material

    For a frame, it is recommended to use Phanelo, cardboard or chipboard boards without caustic odor. The basis is made of straw or plastic.

    Warm cabinet

    The upholstery is performed from plush, carpet, suede, velor. From the same materials you can sew pillows, litters. The filler uses a synthetone or foam rubber.

    In pet stores can also be purchased artificial materials for packing accessories for recreation. They are produced in the form of granules and keep warm well.

    Fastenings are made of reinforcement. This material will ensure the strength and stability of the structure. All parts of the structure are combined with odorless glue, nails. The stapler is used in the soft material.

    Other materials are used. The most important thing is that they do not electrify. It will deliver discomfort pet.

    How to choose a type of house

    When choosing a home you need to pay attention to the age of pet. Kittens are active and movable. They need large buildings with various tunnels, stairs, toys. At the same time, it is important to follow the safety of kids during games.

    With age, the pet is formed by the nature and model of behavior. Animals that do not like strangers will feel comfortable in a houseboard-booth.

    Speed ​​cats are suitable hammocks, sun beds, miniature furniture. For pets loving height, it is recommended to build two-storey housing.

    Booth and Khogtechki

    Some cats are frightened by closed space. For them, open areas of rest (sun beds, hammocks) are suitable. In the closed house you can make a few holes, then the animal will not be afraid of him.

    For the thermal-loving pets, the dwelling is desirable to sew a plush inside.

    Dimensions buildings must correspond to the size and breed features of the animal. For example, large species prefer small spaces for recreation.

    Before making a cat's house, you need to watch the hoods of the animal. In place where the design will be placed, it is possible to put objects that will later be in the dwelling. For example, a layman, brake. This will help you understand whether they like the pet.

    Complex in several floors

    A few more ideas

    You can build a house from the priests with your own hands. It will take:

    • Two wires fifty centimeters;
    • T-shirt or sweater;
    • cardboard sheet;
    • Scotch.

    The production scheme is simple: the wire is crosslinked, the joints of the joint are plugged with scotch, the ends are insulated so that the cat is not covered. The base is made from cardboard. Four holes cut through the corners sheet, arches from the wire are inserted into them. The ends of the wire are bend on the inner sides of the cardboard and fasten with sticky ribbon. Sleeves from T-shirt, sweaters are cut off, their cutouts are stitched. The resulting material is tensioned on the frame so that the neck serves the entrance.

    Step-by-step instructions for the manufacture of warm street housing:

    • take two cardboard boxes of different sizes and put one to another;
    • On the bottom, a large arrangement of a newspaper or foam for insulation;
    • A bedding, mattress, soft cloth or old towels are placed on the bottom of the smaller (the material is taken, the synthetics does not save heat);
    • Little box sash closes, in its roof (in the corner) the entrance is cut;
    • The optimal size for the opening -14 * 14, its edges are glued with scotch;
    • The lid and walls of a large box serve canopy, protect the dwelling from the wind gusts;
    • The design is placed in a dense bag of polyethylene, the seams are sinking with scotch.

    In such a house, the animal will not freeze even in winter.

    Decorate any interior of the house-vigvam. The frame is constructed from metal rods that are connected to a solid rope. The design is covered from all sides, except one, pattern of fabric. The porpoil or litter is put on the housing floor.

    Cozy pet will be in the amateur house. Furniture usually consists of wooden and MDF parts. From the bottom side, the fabric is removed and the logs is cut round input. The tree is processed by latex paint, a soft litter is put on the housing.

    If your cat or cat is constantly disappearing in a closet, scratch a wallpaper or sofa, hide under the blanket and it bothers you, try making a feline corner. Correctly made house for a cat or cat will be a favorite place of time. All sorts of feline corners, with clawholders and without, fully in stores, but it's not at all ... made with your own hands and better, and more reliable ... It is possible to develop it personally under the queries of your favorite.

    What option to choose?

    Build a house for a cat is not so difficult, but it is necessary to correctly choose the design. After all, I want to have a personally made, actively exploited, and not just stood for collecting dust. To like your cat or cat, look at where the pet prefers to spend time that he likes to do where he prefers to relax - climbing higher or on the floor ... In general, it is necessary to pick up the design of a cat house based on the habits of your pets.

    The choice of design is the first thing you have to do.
    The choice of design is the first thing you have to do.

    How to develop a design

    Cats and cats may vary. For example, cats prefer houses with two entrances - in case of emergency evacuation of offspring. Therefore, many people like pipes or similar to them. At the same time, too big LAZ do not like it, as it is necessary to feel in the shelter. Therefore, the entrance / exit to the house must be done not too much so that the pet in it calmly passed, but not more. And yet: not all cats like the houses that stand on the floor - in them cats dwell with kittens. "Idle" prefer asylum at height, although this is also not a fact, and depends on the habits of the individual.

    For cats with kittens, the house is suitable on the floor
    For cats with kittens, the house is suitable on the floor

    Cats prefer to spend time at a height, watching everything that happens around. They rarely sit in the house, but on the venues they can lie for hours. If you have a cat, make more sites, and solid sizes - so that the animal could lie down in full growth without risk fall. The railing if we need, then only for the highest shelves and clearly not around the perimeter, but only from the back and a little bit from the sides. In general, the individuals of the male floor feel very well on the sites without any fences: there is no fence on the trees. The railing is needed more to calm the owners than for cats.

    Lower floor is usually ignored
    Lower floor is usually ignored

    And, by the way, there are cats that love to sit on the courts at least cats. So for them, too, you need a review point, as well as you need houses for cats. Little, maybe he will have a bad mood and he will decide to hide from you there. So yes, we have not been simplified with the choice with the choice, but this is the case - until you try, you will not understand what your pet is needed.

    What to add

    When the owners say "Cat House", usually refers to a whole feline complex, in which, in addition to the house itself there are sites and a number of additional devices. Typically, one or two plots are usually used, and the rest is only occasionally visited. But the fact is that you do not recognize in advance that your pet will have to do.

    Useful additions for a cat house are scratching and lazal rubber. Kogtetochi are vertical surfaces that are usually wrapped with a rope from natural fibers.

    We recommend reading the article "How to make a scratchop for a cat with your own hands."

    Lazallets are horizontal and oblique boys, for which cats can move from one level to another. Kogttechki, by the way, can also be used as lazal rubber - on them the beast is closed on the upper tiers.

    Lazalks and hammocks - it usually likes cats
    Lazalks and hammocks - it usually likes cats

    What else can be in a feline complex? Hammocks. This is usually a piece of rectangular fabrics, fixed on two crossings. Another option is also possible - a hard frame with a cloth with a cloth or a piece of fabric, suspended in four corners to the site.

    Combination of hammock and pipes - one of the "Light" options for a cat for a cat
    A combination of hammock and pipes - one of the "Light" options for a cat for a cat

    Which cat likes the pipes. They are sewn from the fabric, for rigidity insert the circle or oval from the wire. One end is fixed higher, the second is thrown down. The main thing is that at the end of the tunnel there was a clearance, otherwise the cat is not lured. It turns out a good place for an ambush, in which some shaggy hunters love to spend time.

    Brushes are a very comfortable thing to scratch, it is noted when the owner is not near. Kogtetochki allow you to protect furniture from cat claws - it is cheaper than buying an anti-vandal sofa
    Brushes are a very comfortable thing to scratch, it is noted when the owner is not near. Kogtetochki allow you to protect furniture from cat claws - it is cheaper than buying an anti-vandal sofa

    There is another chip that likes cats, but about which not many know - clothing brushes, nailed on vertical surfaces at about the backrest level of your favorite. Bristles on the brush - artificial, medium hardness. Try, your pet will be satisfied!

    Choosing a height

    In general, for cats, the rule is fair - the higher the better. Therefore, the height of the house you want to make with your own hands may be like what you are willing to do is at least under the ceiling. And no matter how much tiers in it, most often the uppermost one will be busy. And if there are several cats, there will be a "leader" at the top and it is this place that will always be disputed.

    This is a whole feline Sportsport
    This is a whole feline Sportsport

    The minimum feline height is about a meter. Such low buildings are safe even for kittens, however, they quickly grow up and then want to get higher.

    Wall-mounted options

    Not even the largest house for the cat takes about a meter of free space on the floor. It is not always possible to identify such space. For such cases there are wall-mounted options for feline corners. The houses and platforms are attached to the wall in the selected place by any available method. Where directly - nails to the wall, somewhere with the help of brackets. Between the fixed parts make transitions. From the boards - direct and inclined, rope stairs, stacked a crossroads at a distance of 10-15 cm from each other, make steps in the form of a ladder ... In general, everything is limited to your fantasy.

    Wall "simulators" for cats
    Wall "simulators" for cats

    Such wall corners for cats are called still shelves for cats, as the construction is very similar to traditional bookshelves. By the way, the shaggy them is very loved and are actively moving.

    Choosing materials

    Cat's house, with all additions, is usually collecting from construction residues. This is quite justified, because many (or all everything) the surface of the finished design will be covered with cloth, textiles, entangled with ropes, etc. So if there are remnants of building materials - you can use them. Requirements for materials (all) two:

    1. They should not have a sharp smell. In any case, such that perceives the human nose. Natural smells (wood, wool, etc.) do not count. If the material is bought recently, and the chemical smell is present, hold it on the street to weathered.
    2. Materials should not electrify. Static discharges are very unpleasant for cats, so open plastic surfaces they do not like. Also do not use silk.
    Different designs, but the materials are the same
    Different designs, but the materials are the same

    All demands, but there are still wishes. Want your cat to quickly and actively master the house? Hold building materials for some time in the house. They are impregnated with familiar odors, will be investigated by a curious beast. Made of "from the resistant" in the house of materials complex will be adopted with greater favor.

    Materials for the base

    If you look at the photo, a feline house consists of different parts and you can make them from different materials. The list of basic materials is:

    • House (Kura): Plywood, chipboard, thin boards, rod weaving, weaving from newspaper tubes;
    • Vertical / Inclined Parts:
    • Hammocks - fabrics, ropes.
    • Places - Wood, chipboard, plywood. Wood can not sow. It is enough to polish (the best option from the point of view of cats), can be covered with water-based varnish or soak oil for wood. Chipboard and Paneur will have to sew textile.

    Explanations require only the trunk of a tree, as a material for a feline complex. Everything literally: take a tree, clean from the crust if it lifts. The branches are used as stands for placement of houses, sites, baskets.

    Than sow

    For the arrangement of brakes, a twisted rope of natural fibers is suitable: jute, linen, pene, sezal, etc. Take a thicker diameter and immediately several tens of meters - if the base is not wooden, all pipes will have to wipe the rope.

    The shelves and houses are squeezed with a tight fabric with a short pile, usually carpet. The shorter and the tight pile, the better. Long and shaggy only look good, and so far the new - with time, dust, wool, different garbage and a cat house becomes causing allergies (your or cat) over time.

    Upholstery / Sheathing - not too darling
    Upholstery / Sheathing - not too darling

    The color of the upholstery, for cats is generally unimportant - they do not react to colors. Therefore, you can choose "under the interior", the most "practical" color, for the color of the wool of the pet, contrasting the cat's fur ... anyone.

    Fastening

    To make your own hands, the cat's house was safe, you should think about the fastener. It is undesirable to use selflessness, as wool can be clinged for them, you should not use and brackets - can be dangerous for claws (both types of fasteners are suitable if the upholstery closes). It remains, in fact, only two types of fasteners: glue and nails, and glue - only PVA. Its normally transfer cats, since after drying it does not smell. Ropes and upholstery are glued on it, and shelves, houses and everything else - nails are nailed.

    Feline lazalks with hammocks
    Feline lazalks with hammocks

    You can still make a safe use of screws. Under the hat to drill a hole with a diameter of a larger diameter of the Hats, set fasteners, smeared with putty. Yes, exactly as in the manufacture of furniture, but what you can't do for the sake of the pet.

    And yet: if the feline complex turned out to be too high, it is better to fix it. To the floor or to the wall, or to the floor, and to the wall. Otherwise, there may be problems - there have been cases when the cats have wrapped the design.

    Photo with dimensions

    No matter how talked about the device for a cat for a cat, it is best to understand the dimensions allow drawings with sizes. If you look closely at them, notice a solid run. This is understandable - cats have large and small, respectively, and the size of a cat's house will be more / less. You yourself can correct them depending on the size of your pets or available at the disposal.

    Stock Foto Feline houses with dimensions
    Stock Foto Feline houses with dimensions
    Three versions of feline corners with dimensions
    Three versions of feline corners with dimensions

    The height of the presented structures is rather big - 180 cm and above, but you can reduce it, removing the extra floors of your opinion. All of these sizes can be as the basis for developing your own layout, put up exemplary sizes. Having a drawing on hand, you can start purchasing materials and making.

    Instructions for making a house for two cats

    There are two cats in the family. Senior - cat aggressor and younger, more movable. Therefore, the design was designed so that the younger could hide on the highest platform, and the eldest, because of his weight, could not get there. The house decided to arrange high, since both cats prefer height. The size made it more so that both individuals there could be simultaneously.

    Source material and labor results
    Source material and labor results

    For this design, a thick furniture plywood (12 mm) is 75 * 50 cm in size, a bar of 50 * 70 (4.2 m), a joot-based carpet - 1 * 2.5 meters, 20 meters of rope. Fasteners - corners. For a house - 15 * 20 mm, for mounting sites - 40 * 45 mm, 55 * 20 and 35 * 40 - for insurance, and a couple of large - for mounting to the wall.

    Cooking platforms and fasteners to the columns

    Pillars in the selected design three: one 220 cm, the second - 120 cm and the third - 80 cm. They will be attached to the basis of the plywood sheet. Based on the poles so that the longest was closer to the wall. In order not to confuse, when marking on a sheet, with the help of a line and pencil, first painted the stencil on the paper on which the location of the columns relative to each other was applied. From the finished layout moved the markup to install the columns. They were fucked by long nails through the basis (4 pieces), drilled in the plywood holes slightly smaller diameter. Then they focused outside the corners 55 * 20 for a large pillar and 35 * 40 for smaller.

    Marking - the most basic
    Marking - the most basic

    Using the same pattern, on the platforms, there were a place of passings, then holes were cut down on them. To do this, the first drill was taken by 12 mm, drilled in the corners marked for the installation of the squares of the hole, which perfectly passes the blade of the electrolyzka. According to the experience: Better a slot to do with a millimeter-two more. The platforms still hold at the expense of the corners, and if it is too small to make a slot, it has to focus on a file or emery paper.

    Fresh prepared platforms
    Fresh prepared platforms

    Before installing the platform, "try on", by the need to adjust the slot. After putting the platform horizontally (we use the construction level) at the desired level, you note the pencil where the platform is worth it. On this markup, then install the corners, so the marks are made clear, from all four sides. When all platforms are normally installed, they are engaged in their carpet.

    Build house housing

    Two pieces of plywood 75 * 50 cm were cut into 4 rectangles. Of them made a roof, gender and two side walls. In the manufacture of one of the shelves, a piece of plywood with a semicircular opening side remained. It was decided to make an "entrance", and the rear wall was cut out from one of the pieces. It remains to collect a house, which is completely simple. Small metal corners were used, which were attached short self-drawing.

    Cooking "nest" for a cat
    Cooking "nest" for a cat

    Before covering the roof house, he was lit from the inside, thus closed fasteners and raised comfort. Work inside the case is not as convenient, but you can cope. The roof was chopped from two sides, after which they fastened with the help of the same corners, but placing them outside. Not very beautiful, but not deadly. The finished house was secured at the place allotted him. Received corners again, but larger - 35 * 40 mm.

    Watch up pillars

    The last stage - wind the poles, making the brake. Secure the rope to the post is easiest all the brackets. Several brackets - and ready. Next, tightly pressing one turn to another, overlook the spirals of the poles. We reach the barrier, reinforce the rope with brackets and continue in the next site.

    As it turned out, the rope must be fell by a hammer ...
    As it turned out, the rope must be fell by a hammer ...

    According to the experience, I must say that no matter how hard, the turns of the rope lay down one to another is not very tight, over time they "worked" and began to "ride" up / down a little. Having done the work to errors, they found a way: setting several turns, they are bridged with a hammer. Everything is simple, but if I knew in advance ... That's all, we made a house for a cat with your own hands. It took about 6 hours.

    Similar design is considered in the video below.

    House of the box and T-shirts for two minutes

    For the simplest and budget option, you need a minimum of "ingredients":

    • Cardboard box of suitable size;
    • Old T-shirt;
    • Wide scotch.

    From the tools only the mounting knife and scissors will be required.

    Stock Foto Interesting cat houses / complexes

    Living next to us, cats are becoming difficult for pets, and family members. I want to create them all the conditions for comfort, so the hosts and try, inventing all new and new devices / structures. We collected a few interesting ideas in this section.

    Different approach for different number of cats, but interesting ideas
    Different approach for different number of cats, but interesting ideas
    Compact "Multi-Build"
    Compact "Multi-Build"
    Shelves for cats - the name is clearly non-random ...
    Shelves for cats - the name is clearly non-random ...
    Make a feline lay in the form of a shelf - an interesting idea. Just like a cat lazaller from the stepladder
    Make a feline lay in the form of a shelf - an interesting idea. Just like a cat lazaller from the stepladder
    Coto bedside ...
    Coto bedside ...
    Cold is not aunt ... Hammak near the radiator
    Cold is not aunt ... Hammak near the radiator
    When the windowsill is too narrow ...
    When the windowsill is too narrow ...
    For lovers of topper. The cat will be happy
    For lovers of topper. The cat will be happy!
    Wall hammock - convenient and safe (for cats and cats)
    Wall hammock - convenient and safe (for cats and cats)
    Guards ...
    Guards ...
    Hammock to organize very simple
    Hammock to organize very simple
    Combination of shelves for cats with hammocks ... Almost work of art
    Combination of shelves for cats with hammocks ... Almost work of art

    Additional video ideas

    The house with a periscope and brake cleaning for a cat.

    Option using PVC pipe with a diameter of 100 mm.

    We all love our four-legged friends, and some are especially strong. We are talking about cats that we love, the cellets, Bullet. In this article, consider how to build a house for a cat or cat with your own hands.

    If your cat or cat love to sit in boxes, climb into various packages, cabinets, bedside tables or banks, it is undoubtedly necessary to give an animal to his own corner. It is necessary to make a house.

    Materials required for a house

    To make a feline house, a small skill will be required, fantasy and droplets of hardworking. For a small dwelling of the four friend in a complex with a clawed and a kind of crib, you will need:

    • LESS LED 61 centimeter long and 44 centimeter width (it will be a roof),
    • 54 centimeter chipboard sheet and 44 centimeter width (it will be walls),
    • Fiberboard sheet 122 centimeter long and 40 centimeters width (base)
    • Rake 3 on 4 length 37 centimeters - 7 pieces
    • 60 centimeters long pipe and 11 millimeters diameter
    • Two bars to improve the stability of the bed.

    For a crib or burdock, you will need:

    • List chipboard 44 centimeter long and 30 centimeters width
    • Fiberboard sheet 44 centimeters and 30 centimeters width
    • Poropolone 44 centimeter long and 30 centimeters width

    For the manufacture of brates you need:

    • Two ropes 15 meters long and 2 meters
    • 41 centimeter long board and 18 centimeters width

    Tools and additional materials that will be needed during the work on the house:

    • Drill or screwdrut
    • Adhesive Pistol
    • Material for tosing a house (fur, cloth)
    • Knife
    • Scissors
    • Sandpaper
    • Roulette
    • Marker
    • a piece of chalk

    Building a cot for a cat

    To begin with, we will make a house. To do this, take two sheets of chipboard and, drawing, a semicircle or a truncated circle cut out a jigsaw or saw according to the drawing two identical semicircles. One semicircle will be solid, and on a different cutting circle, imitating the trail of cat foot. How to do it, you can see on a step-by-step photo on the Internet.

    Now you need to prepare the rails, cut them into them so that they are the same length, to overtake extra protrusions.

    From one corner of a truncated circle, do seven marks at the same distance so that the latter is just on the second corner of the semicircle of the chipboard sheet. Do the same with another sheet. Make sure that all marks both billets coincide with each other.

    Now insert the prepared rails between the two truncated circles, the ends of the rails must touch on the sheets on the sheets. Screw to screw the rail to sheets of chipboard throughout the circumference. Only the base of the truncated circle will remain. Now you can enjoy the selected cloth. This can be done with a glue pistol or a stapler for fabric. How to rolling the house, you can see in a detailed master class.

    Measure the resulting base of the future house and transfer the drawing to the DVP sheet, which was prepared for the base of our pet house. Stick to the resulting place a piece of foam rubber cut out the drawing. It will be the first bed for the cat.

    Leave the place on the base sheet for the pipe that you need to use as a bratechka and from above to make an extra bed for an animal. Now you can hide the main sheet of matter. In the upholstery, also do the hole as at the bottom.

    Having measured the diameter of the pipe, cut a circle on a sheet with an identical diameter so that the pipe entered the circle and stood tightly there. Next to the pipe you need to squeeze the prepared wooden bars. This is done in order to have the opportunity to fix the second layout on the end of the pipe, as well as to provide greater stability of the pipe.

    Of the two sheets of chipboard and fiberboard, we cut two semicircles of the same size. In a sheet of chipboard, cut out the circle for the pipe, and the Fiberboard sheet will remain the same.

    Now the semicircle from the chipboard needs to be "put on" on the top of the pipe and consolidate it with hot glue. Install the second semicircle from above and attach to a bar in a pipe with a screwdriver or a drill. Now you can glue a piece of foam rubber for softness and hammering a cloth a second layer.

    On the pipe with the help of hot glue wrap the rope from the top to Niza. Fasten with glue or stapler. The first brazetchka is ready.

    A ready-made piece of small size cover a dense cloth or also wrap the rope. Leaving to the roof of a feline house. Secure with screws at the base and on the roof. Here is the second brazetchka!

    You can attach a rope with a ball at the end to the top layer with a stapler. It will be a toy for a cat.

    The house for the cat is ready, it remains to determine the place where the kingdom of your pet will be in the apartment.

    How to make a house for a cat quickly and without special costs

    I want a universal favorite to have a house, but sometimes there is not enough time or funds. You can make a cat in the housing of the girlfriend, without spending a lot of time. Here is one idea of ​​such a light house.

    For a "fast" house, we will need:

    • Cardboard or wooden box
    • Old T-shirt
    • Stapler

    Making a house

    1. Prepare a box: Cardboard put in needed places, clean the wooden box from unnecessary parts, such as nails, brackets and other items that can harm the animal.
    2. The box should be opened only on the one hand. To put on a t-shirt on the box so that the neck accounted for the middle of the open side of the box. It will be a kind of entrance to the house.
    3. Excessive material from the heaters of T-shirts gently fold on the bottom of the box and secure all the stapler so that matter does not hang out. Sleeves point inside.
    4. Previously inside the box you can put a soft mattress for an animal or rug.

    That's ready easy version of a cat house!

    You can always pay attention to your beloved pet and give the cottage to his own house, even if time is missing. Cats love to climb into various capacities and cabinets. So why not give them your own housing, where can they hide and play? It will bring a lot of joy and pleasure animal.

    Photo ideas of homemade houses for a cat

    How to make single-storey houses for a cat out of boxes

    What do you need

    • 2 identical large boxes;
    • adhesive tape;
    • scissors;
    • stationery knife;
    • marker, pencil or pen;
    • Tassel or roller;
    • White paint;
    • Yellow paint;
    • pink paper;
    • glue gun;
    • paper with drawings and patterns;
    • twine;
    • 2 Colored tubes for drinks;
    • litter.

    How to do

    1. Take the first box and cross the seam at the bottom of the adhesive tape outside and from the inside.

    House for the cat do it yourself: Clean the seam at the bottom of the first box
    YouTube Channel Cuteness

    2. From the opposite side, cut two side folding flaps.

    Cut two side flaps
    YouTube Channel Cuteness

    3. Two other flaps apply for scissors so that triangles come out.

    Cat house with your own hands: Cut the triangles from two other flaps
    YouTube Channel Cuteness

    4. Draw a front under one triangle of the door outlines - a large vertical rectangle, separated along in half. Cut the cardboard on the outlined lines and on the base of the box. Open the resulting door.

    Draw and cut the door
    YouTube Channel Cuteness

    5. On the side of the box, depict the window with the frame and cut down the contour.

    Draw and cut the window with the frame
    YouTube Channel Cuteness

    6. On the triangle over the door, draw and cut out a small round window with a frame.

    Cat house with your own hands: Draw and cut out a small window with a frame
    YouTube Channel Cuteness

    7. Take the second box and separate two side walls from it. Glue them with each other.

    Glue the side sides of the second box
    YouTube Channel Cuteness

    8. Place the design on the house and attach the back and in front to triangles.

    Cat house with your own hands: Stick the roof
    YouTube Channel Cuteness

    9. Color the walls of the house in white color. Go through the doors outside and inside with yellow paint.

    Color walls and door
    YouTube Channel Cuteness

    10. Cut out a pink paper "Tiled" - a lot of not too large rectangles with rounded edges. Lubricating hot glue to the forward side of the details, attach them with rows to the roof.

    House for the cat do it yourself: Make a tile of paper
    YouTube Channel Cuteness

    11. Cut out several triangular flags from the patterned paper and glue them to the beep. Attach it with glue over the door. On the doors, make the handles from the tubes. Put inside the house, warm litter.

    How to make a one-story house for a cat do it yourself: hang flags and door handles
    YouTube Channel Cuteness

    What else there are options

    Here is a simpler example of housing from one box:

    The authors of this master class have smartly for pets a cute residential bus:

    How to make two-storey houses for a cat out of boxes

    What do you need

    • Several cardboard boxes;
    • scissors;
    • Stationery pin;
    • pencil;
    • line;
    • stationery knife;
    • glue gun;
    • Slim plastic;
    • Pillow or basket with something soft.

    How to do

    1. Cut a narrow strip from the cardboard and step by the side by the pin. Insert a pencil there, put on the cardboard and, holding the item from one end, scroll it in a circle.

    House for the cat do it yourself: Draw a circle
    YouTube Channel EverxFun

    2. Conduct a direct long line under the range. From the middle of the circle in the same side, output another horizontal trait. Connect them one vertical.

    Cut the shape of a stationery knife. In the same way, prepare another figure.

    Dorisite the shape and cut two such details
    YouTube Channel EverxFun

    3. Cut in a large piece of cardboard several rectangular windows. With the help of glue-guns, attach this item to one circle.

    Cat house with your own hands: St pin walls with windows
    YouTube Channel EverxFun

    4. Cut from the cardboard a piece: the height should coincide with the height of the design made, and the width with a length of the rectangular part in the front of the base. Cut in a piece of door and a window with a frame. Connect the element to the front of the house.

    Stick the wall with window and door
    YouTube Channel EverxFun

    5. Clay the rear wall of a solid piece of cardboard, and a narrow side - cardboard with cut in it.

    House for the cat do it yourself: stick the rest walls
    YouTube Channel EverxFun

    6. Cut the circle from another detail from the second step. Pan it horizontally in a round item, just below the top edge. Other sliced ​​part attach over the walls with the door and windows.

    Make the ceiling
    YouTube Channel EverxFun

    7. Cut a few of these figures that are shown in the photo. Clean them between themselves so that the details are thicker.

    Cat house with your own hands: Prepare parts for stairs
    YouTube Channel EverxFun

    8. Vertically glue small details to the plate with holes. On the other hand, attach the second part. It will be a staircase.

    Spread the stairs
    YouTube Channel EverxFun

    9. Make on the second floor of sides, as shown in the photo and in the video.

    Cat house with your own hands: Make Safety
    YouTube Channel EverxFun

    10. Top in the middle, stick the cardboard so that the tunnel formed.

    Make tunnel
    YouTube Channel EverxFun

    11. On the side, above the window, stick the staircase. Thin cardboard strips close the seams on its railings.

    At the seam above the door, attach a trump card under the tilt. In the round item from the inside, plunge thin plastic, "glazing" windows. Put the pillow or basket with something soft.

    House for the cat do it yourself: stick the staircase, close the seams and paste the windows
    YouTube Channel EverxFun

    12. At the request, deactivate the house, add soft cloth inside and hang over the door bell.

    How to make a two-storey house for a cat out of the boxes do it yourself
    YouTube Channel EverxFun

    What else there are options

    Here is another house as much with two stairs:

    And this cat was smasher than a home with a personal hammock:

    How to make a house for a cat out of a box and t-shirt

    What do you need

    • Big box;
    • scissors;
    • Big T-shirt;
    • Several pins.

    How to do

    1. Cut the box with a lid. The author of the master class cut the box and turned her inside out, so that he did not transluce the drawing on the cardboard through the T-shirt. But this is optional.

    House for the cat do it yourself: Cut the box with the box
    YouTube Channel Pltube

    2. Take a T-shirt and pull it into cardboard so that the neck is in the middle of the hole on the box.

    Put on the box T-shirt
    YouTube Channel Pltube

    3. Reflect the fabric. On the sides you will have a sleeve T-shirt. Sell ​​each of them inside. The detailed process is in the video.

    Hide the sleeves
    YouTube Channel Pltube

    4. Gently sew the bottom of T-shirts and fold the edges to the middle. Fix cloth with pins.

    House for the cat do it yourself: fix the bottom T-shirt
    YouTube Channel Pltube

    5. Put the house so that the hole is located in front. Inside, you can put a soft litter.

    How to make a house for a cat out of the box and t-shirts do it yourself
    YouTube Channel Pltube

    How to make a house for a cat from cardboard, T-shirts and hangers

    What do you need

    • Pliers;
    • 2 Thin wire hangers;
    • cardboard from the box;
    • adhesive tape;
    • Big T-shirt;
    • Several pins.

    How to do

    1. With the help of pliers, cut the tops from the hangers, slightly retreating from the base of hooks.

    Cut the tops from hangers
    YouTube Channel Purina Friskies

    2. Follow the hanger tip in the corners of the square piece of cardboard on the hole. Bend the wire into the arc. Schedule it into one hole and pliers, start the tip.

    Clean the wire in cardboard
    YouTube Channel Purina Friskies

    3. Secure it with a sticky tape.

    Secure the wire
    YouTube Channel Purina Friskies

    4. Insert the remaining ends of the wire crosswise so that it is such a design as in the picture.

    Build a carcass
    YouTube Channel Purina Friskies

    5. To reliably, cover the wire crossing the wire with adhesive ribbon.

    House for the cat do it yourself: Create the place of intersection
    YouTube Channel Purina Friskies

    6. Put on the frame of the T-shirt so that the neck is located in front.

    Put on the skew on the frame
    YouTube Channel Purina Friskies

    7. Put the house on the side, crush the bottom of the fabric and secure it with pins.

    Rice and lock the bottom T-shirt
    YouTube Channel Purina Friskies

    8. Bend to the bottom of the design of the sleeve and also fix them with pins. Check the house on the base and, if you want, beds inside something warm.

    How to make a house for a cat from cardboard, T-shirts and hangers
    YouTube Channel Purina Friskies

    How to make a chalashi houses for a cat from rheeks and fabric

    What do you need

    • 5 round wooden plates;
    • rope;
    • Square piece of fabric;
    • scissors;
    • 1 pin;
    • litter.

    How to do

    1. Fold together two rails. Cross-closer add another one. Take the rope under them.

    House for a cat do it yourself: fold three rails crosswise
    YouTube Channel Purina Friskies

    2. Verify the right end of the rope on the intersection of sticks. Then spend it under two folded racks together.

    Wrap rake rope
    YouTube Channel Purina Friskies

    3. Stretch the same end of the rope under the resulting loop.

    Cat house with your own hands: stretch the rope under the loop
    YouTube Channel Purina Friskies

    4. Get the drill to two folded racks together and stretch again under the same loop.

    Stretch the rope under the loop on the other hand
    YouTube Channel Purina Friskies

    5. Tie both end of the rope with a strong knot.

    House for the cat do it yourself: Tie a rope by a node
    YouTube Channel Purina Friskies

    6. Put the design on the legs.

    Put the frame
    YouTube Channel Purina Friskies

    7. Place one another, wrap the place of intersection of the rope and firmly typ. In the same way, tie the last stick.

    House for the cat do it yourself: Tie the remaining rails
    YouTube Channel Purina Friskies

    8. Cut a semicircle one tissue angle. Wrap the material around the stick and fix the top in front of the pin.

    Put the fabric on the frame
    YouTube Channel Purina Friskies

    9. Open the fabric ahead so that you can enter the slush. Put inside the litter.

    How to make a house-shala for a cat from racks and fabric with your own hands
    YouTube Channel Purina Friskies

    What else there are options

    In this video, it is shown how to sew a case on such a wooden design:

    How to make houses for a cat car

    What do you need

    • Plywood;
    • Electrolovka, saw or other tool for cutting;
    • glue "moment";
    • nails;
    • a hammer;
    • Screwdriver with a grinding nozzle;
    • brush;
    • black paint;
    • sandpaper;
    • Wooden varnish.

    How to do

    1. To square pieces of plywood from all sides, glue low sides.

    Cat house with your own hands: Make Safety
    YouTube Channel Workshop Tree

    2. Drink two identical walls and two pentagonal parts. On one of them drink the door. Spread the details so that the walls of the house are turned out. For reliability in some places you can kill the tree with nails.

    Spread the walls
    YouTube Channel Workshop Tree

    3. Turn the first structures down design. Stick to this base wall.

    House for the cat do it yourself: Stick the walls to the base
    YouTube Channel Workshop Tree

    4. Make the roof base: on both sides, insert two long rectangles between triangular figures. If you put a house right, these rectangles will be tilt.

    Make the root base
    YouTube Channel Workshop Tree

    5. Drink a lot of small rectangular details from plywood. Lubricate the roof of glue and rows to put "tiled" of these pieces on both sides. In the middle, close the space between the two parts of the roof.

    House for a cat with your own hands: Cover the roof "Tiled"
    YouTube Channel Workshop Tree

    6. Squeam the edges of the "Tiles".

    Subscribe the edges of the "Tiles"
    YouTube Channel Workshop Tree

    7. Drink and glue such doors as shown in the photo. Place them on the sides of the inlet.

    Cat house with your own hands: Stick doors
    YouTube Channel Workshop Tree

    8. In front of "Tiled" attach two wooden strips glued together.

    Place the roof
    YouTube Channel Workshop Tree

    9. Make vertical scubons on the roof.

    Make a roof pattern
    YouTube Channel Workshop Tree

    10. Black paint paint the roof. After drying, go through it sandpaper. Laco cover the rest of the house.

    Paint the house for the cat do it yourself
    YouTube Channel Workshop Tree

    11. The author of the master class added a large branch to the house and a multi-tiered cat seat. If you want to do the same, follow the instructions from the video.

    How to make a house for a cat from a tree do it yourself
    YouTube Channel Workshop Tree

    What else there are options

    Laconic house with a rounded roof:

    Horse in the shape of a hexagon:

    The raisin of this house is in an unusual inlet:

    And to this construction, the joy of fluffy, attached scraper:

    Добавить комментарий