How to open a mounted lock without a key - Masters Tips

Opening a blocked mechanism

Навесной механизмThe main reasons for the popularity and demand of hanging castles are extremely simple design, ease of operation and budget cost. Despite the relatively low level of burglary resistance, the presence of such an impressive list of advantages explains the wide scope of practical use. It includes buildings and premises of the most different profile - garages, warehouses, satubs, basements, as well as security systems designed to protect individual items, such as suitcases or bicycles. The detention and simplicity of the design provide the durability of the product. Most of the problems in the process of operation of the locking devices of this type are associated with a loss or body failure. For code mechanisms we are talking about the situation when the owner forgets the secret combination. In both cases, the question of how to open the hinged lock without a key becomes serious. And it is necessary to do this not only quickly, but also neat.

There are two approaches to solving this problem. The first assumes the execution of work on its own. In this case, it is possible to save on the services of professionals, the appeal to which provides for the second option to eliminate the difficulties.

Council. To make a decision to independently operate the door or a suitcase hinged lock without a key, follows only completely confident in our own forces. In any other case, it is easier, faster and more profitable to call a specialist.

Types of castles

Before starting work, it is necessary to determine how to hack the mounted lock so as to minimize possible damage to the locking device and the door on which it is installed. This requires to explore the design features, as well as the suspension mechanisms presented on the Russian market.

Замочные механизмыThe main distinguishing feature of such products is the possibility of separating from the protected design. The housing of the locking mechanism is attached to the door or suitcase with the face of the face, the alternative is the use of a chain or cable in the event of a bicycle locking product.

To classify the locks of the type under consideration, several criteria are used. The first is the material of the manufacture. Depending on this parameter there are aluminum, cast-iron, steel and brass locks.

According to the method of hanging and design features, 4 varieties of castles are distinguished:

  1. Open. A typical example is a classic suspension or barn castle. The main characteristic detail is a semicircular handler that is not protected. Is the weakest place, as it allows you to hack the product using any lever of sufficient size;
  2. In the form of a mushroom. The above-mentioned handle is replaced with a special metal pin. It has thickening with one of the sides and visually resembles a mushroom hat. The level of burglary resistance of such a mechanism is slightly higher, open the lock without key is noticeably more complicated;
  3. With a shut-off finger (or semi-closed). An even more reliable design of the locking device. It is ensured by partial placement of the metal pin inside the housing protruding additional protection;
  4. Closed. It has the highest level of security characteristics. The locking finger is completely hidden in the housing, excluding the opportunity to disrupt it by simply affecting the lever. The characteristic form led to the fact that the castle of this type is often called square mounted.

The third criterion that is used in the classification of mounted locking devices is the manufacturer. Produced by domestic and European enterprises are most qualitative. On the contrary, the Chinese broken mounted shut-off mechanism is a common phenomenon. Although in recent years, the quality of products of companies from China has grown noticeably. Moreover, it has key advantages - the budget value, which is often able to compensate for the insufficient level of security parameters.

Висячий механизмCouncil. When choosing a mechanism should not be guided solely by the price. It is much more correct to consider criteria in the complex - this approach is more competent and more profitable for the buyer.

Another feature used for separation into categories is the type of secret mechanism. In accordance with it distinguish 3 types of locking devices:

  • Cylinder. Apply relatively widely, which is due to the compact sizes and a variety of models presented in the Russian market;
  • Suwald. Used to configure hanging locks relatively rarely;
  • Code. Widespread variety. The small option is mounted on bicycles and suitcases, more overall - on the entrance doors of utility and economic buildings or premises.
How to open a mounted lock without key

By deciding how to open the mounted lock, first of all, such hacking methods should be chosen, which eliminate or minimize the likelihood of damage to the structure. In this case, with the successful implementation of the event, it is possible to further exploit the shut-off device.

Council. The castle of the attached type of some models can have the ability to transk. In this case, the costs of restoring its performance will be much lower than buying a new device.

The second factor affecting the choice of the method of hacking produced by the owner without a key independently, this is already mentioned the type of secret mechanism. Taking into account this parameter, you can select several answers to the question than and exactly the easiest to open the mounted lock if the key is lost:

Взлом механизма
  1. The opening of cylinder hanging locks is carried out using various auxiliary items and tools - screwdrivers, stationery clips, studs or hairpins. They are selected in the form and dimensions of the keyhole;
  2. An independent hacking of Suwald type shut-off devices without damage involves the use of a professional instrument, as well as the availability of skills to work with it. If you fail to fulfill any of the two conditions, the successful outcome of work is unlikely;
  3. Opening the code lock without knowledge of the secret combination is quite possible. To do this, use the password selection method, the definition of the code according to the characteristic failures of the buttons or sounds published by the mechanism of the locking device during operation. The chances of a successful autopsy in such a situation depend on the skills of the performer and the level of burglary resistance.

Listed methods, how to open the castle, provide for its further use. But not always deciding after problems with the key, what to do in the future, the owner thinks about the state of the locking device and the accurate handling of it. Often, it is much more important to get access to the room. In such a situation, the so-called destructive methods involving the use of the following tools are used to open the door:

  • Scissors for metal. With their help, it is enough to simply have a snack of most models of mechanisms;
  • Scrap, installation or nail. Used to remove fasteners fixing the eyes holding the locking device;
  • Different levers. In such capacity, the pipe segment, spanning or adjustable key, wooden bar and other objects suitable in size and strength are used.

Tips and recommendations

The main recommendation to the owners of hanging castles was voiced above. It consists in the feasibility of performing work on a hacking mechanism only if the Contractor has a clear idea of ​​the planned actions and methods of their implementation. It is not difficult to get the necessary information - on various thematic Internet resources place detailed descriptions and video relating to various methods of hacking.

The second important advice is not always saving on such an important product as a castle, justified. Especially in the event that we are talking about the protection of valuable property, money or important information. Therefore, if necessary, autopsy is often much more profitable to turn to professionals than trying to solve the problem yourself.

How to open the lock with a paper with a clip, a pin, a launder, pin?

Как легко сломать навесной замок?

In the life of each person, curious situations of various kinds occur sooner or later, the resolution of which is quite often not quite standard and correct methods. One of the most painful and common is the inability to open the castle "native" key. Causes and prerequisites to make it contrary to the rules - mass.

For example, the key was lost from the apartment, the house remained from an important drawer at work, a child closed in the room and can't get out, the key from baggage, diary, caskets, etc. was lost.

Nobody is insured against such situations. It is not always possible to create a locksmith, to open the front door. Permission of this problem, surprisingly simple and primitive is a clip. It is the stationery clip that can become an indispensable tool in solving this confusion.

Varieties of castles

The technology of hacking of the lock is caused by a feature of its construction and principle of operation.

The main types of locks are the following:

  1. The pin cylindrical door lock is the most common, characteristic feature of which is the key with teeth on the end.
  2. Suwald (safe) castle - reliable, high secrecy.
  3. Finnish castle (disk key of the semicircular shape) - is characterized by a high level of secrecy, reliability and unlikely hacking, due to the absence of a springs in the design of the lock.
  4. The castle of the car is more often a pin, but has a number of hacking features, compared to conventional locks.
  5. Suspended locks, cheeks are the simplest in its construction and use of the mechanisms.

Security, first of all

As experience shows, only cheap or incorrectly installed locks can be easily opened with a clip, housing, pin, with a heel, and other priests.

It's not a secret, today even the template thief is able to open the code lock on the door of the entrance, and do not get inside and nothing is worth it. You can always find the door equipped with a simple type of castle, not the highest quality, which is open - one pleasure for people of such a "profession."

By the way, if you are engaged in network, then read https://orif.su/blog/otzyvy-vekrosta.html review about the platform.

Thought and want to check how easy it is to hack the lock of your entrance door? Easy!

Next steps:

  • with the help of a M-shaped plate inserted into the keyhole, press and scroll through the mechanism to open the lock;
  • Bend the hook from the usual clips, insert inside, click on the pins that look out from the grooves, and blend until it stops until the cylinder is checked;
  • With the rest of the pins, repeat the same procedure, until the lock is given under the pressure of your deficiency, and it will not work out to open the door.

Everything succeeded? Unfortunately, such a lock does not fully fulfill the function of protecting your home. An alternative solution is to establish a more reliable mechanism.

What way to use?

We propose to consider some ways as correctly and without consequences to open the door with a simple hod, on the example of several simple mechanisms.

Warning: The article is invoking. It is not recommended to use this information for illegal actions, including those that are prohibited by applicable law.

Method number 1.

Incorrectly installed a priori doors can be easily discovered without making special efforts. Especially if the door canvases are easily adjacent to each other, and there is a big gap between them.

Innek a large hook from the clips and grind into the gap, covering the inner latch, output the second end of the clip on yourself. Hold both ends and pull on yourself, the latch will weaken, and the door will be converted.

Method No. 2.

Castle with a secret - such locks are most often installed in interroom doors, work on the principle of rotation of the handle by pressing the button located in its center. From the outside, open the door with a similar action is impossible.

But, nevertheless, it is easier to hand over such a castle with honests. In this case, straighten the clips, enter into the locking well, push the tongue, holding back the latch, and turn the knob.

Method number 3.

The door on the junk is perhaps the most affordable and unreliable. Grind the right end of the clips between the sash so that it is under the valve, swipe up until you feel the latch with a latch.

Such a lock is convenient because the valve can be returned to its original position, and no one knows that she was discovered anyone.

Method number 4.

Castles for suitcases are difficult to name secret, reliable and durable. It can be opened at times, the most primitive tools, all the same closet or stud. Bend the close of the clips into the small loop, it is desirable to maximize the key shape from this lock.

Insert the end of the clip into the well and turn until you find the clamp and do not break the spring inside the mechanism.

As you understood, most castles are just a deterrent, a certain deterrent means, but not 100% of the safety of your dwelling and property.

A source: http://votdver.ru/furnitura/zamki/kak-otkryt-skrepkoj-shpilkoj-otmychkoj-bulavkoj.html

How to open a mounted lock without a key

Как легко сломать навесной замок?

Undoubtedly, door locks are able to reliably protect the room from penetration, since the device of their mechanism is quite complex. However, if necessary and possession of some tools, they can still be discovered. This is a significant plus in cases where the key from the castle was lost, and it is necessary to get into the room.

This type of lock, as attached, is most often used for the door leading to utility rooms, warehouses, garages. In most cases, there is no need to regularly open similar premises, so the key can easily be lost among other things.

What fool's tools will help open the lock?

Often, in the series or film, you can see how professionals crack the castles with the most simple primary means, for example, invisible, clips or wire. In fact, it is - a paper clip is a very effective tool for opening the attachment.

If you need to open the castle, you will need two clips. They bend the letter G, and one of them is inserted into the castle. It is necessary to try to bring the mechanism into motion, rotating the clip. All movements do not hurry, it is important to feel the mechanism itself in order to open it easier and faster.

After a while you can feel how the castle hooked. Now you need the second paper clip, which is inserted into the hole in the top of the castle. The next step is very important: you need to pick them up alternately. It is necessary to do it carefully and carefully. When all the pins are raised up, it remains only to turn the first clip to achieve the final result. Now the mounted castle is open.

How to cope with complex mechanisms?

As mentioned earlier, it is not so easy to open the hinged lock. It is made by various species, respectively, is classified in dimensions, quality, cost, and despite the fact that these products refer to the type of mounted castle, they have tremendous differences.

For example, a very common type of mechanism - a lock on the spring. Accordingly, if there was a need to open the room, it is necessary to influence the inner spring. In most cases, the lock on the spring is used as an additional protection or hang it on the doors of barn, hozpostroops, cover them a certain luggage.

Spring also needed using special tools. Practically try to choose this product yourself, which will be perfectly approaching the size of the castle, and affect the spring. As such a product, it can act as a pin and a nail.

Hacking the cylinder mechanism

The cylinder mechanism has its own characteristics and several ways of hacking. The following method is the most efficient and widespread.

  1. It will take a screwdriver, with which they screw the screws directly into the castle cylinder.
  2. The destroyed mechanism is aligned with nail cutter.

Thus, the secret mechanism is destroyed, and the castle is hacked.

How to hack the castle, but at the same time save its integrity?

So that after opening the room, do not acquire a new lock, one proven method can be tried, which will save it. To do this, you need a conventional tin bank: the lid is cut and the bottom, and the cylindrical part itself is cut in half.

From one such half it is necessary to cut the figure like the letter T. Please note that the leg from the letter should be long enough, such that easily enveloped the alignment of the castle itself. Next, it is necessary to turn the cut out figure with a semicircle, and insert it with the end between the castle casing and his handicap. The whole design turns in a circle, spending a complete turn. Now the castle can be hacked, just enough to pull the handle as it opens.

How to hack a mounted castle by other methods?

Of course, there are other hacking methods, they do not require painstaking work. For example, open the castle can be a grinder. It is especially effective on Chinese locks, since their steel is usually less durable. To cut the castle's handcap, you will not need a lot of time, it is enough just to make some efforts, and sometimes it turns out to be cutting even with hacksaw.

Since Bulgarian may not have any other tools, for example, scrap. With it, you can also break the castle, but it does not do without strong male hands. Scrap is installed in this position so that it is located between the castle housing and the handle. Such a method does not always work, but in most cases it turns out to be done so that the alley jumped out of all the grooves. Efforts are applied guiding the end of the scrap down, and the opposite side is up.

Due to the fact that many castles succumb to hacking, it is necessary to acquire the highest quality and reliable mechanisms. It is also recommended to store keys in a certain place or make them a duplicate so that in the event of a loss of one copy did not have to hack or change the lock.

Alexander

 / 

Vladimir

 / 

25-10-2017

Comfortable site, very operational and polite staff. They called back quickly and quickly sent an account for payment.

Write a review

A source: https://optoring.ru/novosti/otkryt-navesnoy-zamok-bez-klyucha

Hairpin, clip or how to open the front door without a key

Как легко сломать навесной замок?

09/03/201686278.

In the life of each person there are problems, the solution of which requires a non-standard approach. Situations of this kind refers loss or damage to the key, unlocking the entrance door and, as a result, the lack of opportunity to get into the private type or apartment.

Door lock

Faced with such a problem, you do not need to give in to a panic and try to penetrate the room by any paths. To begin with, you should familiarize yourself with several ways, with which you can open the door.

Types of castles

There are several types of locks, each of which can be unlocked in one way or another and open the door, while spending the minimum of forces, time and not applying the damage.

  • Hinged. Locks like this type are used when installed on the doors of the economic premises: a barn or garage, and not as constipation for the front door of the house. They are characterized by simplicity and conciseness.
  • Overhead. Locking systems of this type are installed on the outer inlet door if there is also an internal one. They do not guarantee reliable protection, easy to use, have a non-primable appearance.
  • Curling. Such locks are convenient during operation, ensure reliable safety of the property and do not spoil the aesthetic appearance of the entrance door. The only minus is that when installing, the integrity of the canvas is disturbed, which subsequently leads to the appearance of cracks and other flaws.
  • Contributions. Systems of this kind are reliable and guarantee a high level of protection against hacking. They are installed in the canvas of the door directly at the factory, which provides quality and presentable appearance.

Tools required when opening the door without a key

The choice of the tool, the use of which is necessary in order to open the door, directly depends on which side the canvas is molded: inside or out. In addition, some of the tools are interchangeable if there is no one, another is used. A number of the following devices must be present in the set of novice "meblers":

  • Pliers.
  • Hair pin (truly universal tool that appears in the moving door scenes).
  • The so-called Bulgarian.
  • Drill.
  • Iron scrap.
  • Pillet from jigsaw.
  • Set of screwdrivers, or one flat.
  • Universal door lock, to purchase which is currently possible in any shop of economic type.

How to open the door at the wrench

In case of loss of the key, you can hand over the inlet door when using the following methods:

Screwdriver and knife for opening the door

  1. For hacking some locks the stud is suitable. To do this, the decorative element of female hairstyles should be carefully broken down into two equal parts, which are used independently of each other. One of the halves is used as a lever for turning the mechanism, and the second part of the stud at the same time recesses the pins. For such an operation, certain skills are required and a sufficient amount of time. The main plus of such a method is the lack of damage to the shut-off mechanism and the door canvas.
  2. The method mentioned above can also be applied using one or two stationery clips. Open the lock with a clip - a simple task. One clip, or a separate part should be used as a rotary mechanism, the second - like lever. In this case, the same manipulations are carried out that need to open the lock to the stud.
  3. If there is a mortise lock with a cylinder mechanism on the door, you can open it in the following way: in the cylinder, drill a hole using a thin drill and, inserting a suitable wire to it, turn it to rotate the cylinder.
  4. If you need to open the lock, equipped with the tongue, you should use a knife or a screwdriver of a small thickness. The selected tool must be carefully turned into a slot between the web and a jamb and hooking the tongue, open the door.
  5. Open the Suwald type lock can be used when applying a similar method. To do this, pull the door as far as possible and, picing the Suwald to the instrument suitable for this purpose, move away.
  6. If the door canvas is old, or in the case of a long operation of the door lock, you can simply hack the lock, completely destroying it. To do this, apply several blows with a hammer or a small sledge hammer directly in the center of the structure.

How to open the lock if the key is broken

If the lock and key are operated for a long period of time, the latter may break when turning in the keyboard. This is because over time, the metal, from which the detail is made, wears, is covered with scratches and cracks, which violate the integrity of the key.

To open the lock when the key breakdown, or if the key does not rotate in the lock, you need to carry out the following steps in a specific sequence:

  1. First you need to remove the wreck of the key, trying to open the front door at the same time. If the chip acts on the keyboard, you should try to pull the key with the help of ordinary pliers, while when turning to open the mechanism. If success, you can not only pull the broken key, but also open the lock without damage.
  2. If it is not possible to pick up the debris, it is not possible to use a thin pink of the jigsaw for this purpose. This tool must be turned into the lower or top of the castle, turning the teeth in such a way that they are directed directly to the key. Next, it should be carefully hooking a debris and stretch out.
  3. If, after removing the debris, the lock remains closed, open the door without a key, you can apply the opening methods described above. It is also possible that with a breakdown of this element of the locking system, a mechanical damage to the lock occurred. In this case, remove the mechanism of constipation.
  4. To remove the lock, you should neatly unscrew the plate closing the mechanism, then remove the constipation elements with wire or clips. This method is applicable only if the castle refers to the type of English.
  5. In case of damage to the locks of any other type, only one way of how to open a lock lock is damage to the device by using the hammer or sledge hammer.

How to open a mounted lock without a key

The mounted castle is a mansion in a number of other shut-off systems. Despite the simplicity of design, it provides a high level of protection against hacking and subsequent penetration into the room.

Hinged model

If you lose the key of a similar mechanism, open the mounted lock without a key, you can apply the following ways:

  • The basis of the shut-off system of the attachment is the spring. First you need to try to insert a solid wire into the well, pressing directly on the castle spring. Further, in the center of this spring, you need to place the second wire or paper clips and, acting in the type of key type, unlock the mechanism. It is also permissible to open the castle with a stiletto.
  • If the method specified above has not occurred and the lock does not open, you can get rid of it with a hammer, sledgehammer or fombus. Applying these simple devices should be confused by opening access to the locked room.

How to protect yourself from loss or key breakdown

No one is insured against the problems of such a kind. Therefore, attention should be paid to some aspects that will help to avoid the situation when access to the room is limited due to the loss of the key from the lock of the inlet door, or its breakdown.

  • The life of the shut-off mechanisms has a certain time frame, after which the design is subject to replacement. Determine the degree of wear of the device using a visual assessment. If the housing of the lock and the key itself is covered with scratches, cracks, and the teeth are erased, it should be replaced immediately, in order to avoid failure of shut-off mechanisms.
  • You can also install a locking lock, designed relatively recently. The mechanism of this kind does not need the presence of keys and is not equipped with a keyhole.

You can also prepare yourself in advance to the fact that one day the key unlocking the entrance door will be lost or broken. To do this, it is necessary to prepare a set of tools required to open the lockable mechanism that will help at the right time to turn around the door and store outside the house, in the garage, the utility room of the entrance or machine.

If there is such a "recruitment of the bear", the time spent on the search for the necessary devices to cut and get into the apartment will be much easier.

If such a situation arose, it is possible to enter as follows:

  • To avoid damage to the locking mechanism and the door leaf, you should call a locksmith, which can open the lock quickly and gently using the locks and other necessary tools.
  • In the event that time is limited and does not tolerate the tracking of a locksmith, you can use the services of firms specializing directly at the autopsy of any type of locks. The master will quickly and carefully solve the emergence of an unexpected problem. Services of this type have a high cost.

Summarizing the foregoing should also be noted that in the desire to get into the locked apartment should not be used by ways that may cause damage to health. These include attempts to penetrate the room through the neighbors balcony, through the window, or with the help of a fire staircase. An acceptable option in this case will be the time loss spent on the search for the necessary tools and the opening of the shut-off mechanism.

A source: http://misterdver.ru/council/shpilka-skrepka-ili-kak-otkryt-vxodnuyu-dver-bez-klyucha/

How to open a lock without a key? Open hinged

Как легко сломать навесной замок?

Hinged lock is an excellent choice for technical premises, attics, basements, garages and household buildings. For a long time, the barn castles are not used in residential premises. But for technical - the right decision. A mortise type can rust. Special skills are needed for opening. After the manipulations were performed, the door will have to change. How to open the mounted castle, not everyone knows.

Required tools

There are several ways to implement the hammer, two horned keys, screwdriver, screwdrum, scrap with a semicircular end, canvas for metal. But there are ways of opening with the most common household or mount items.

How to open a hinged lock without a key?

A simple and logical method - knock down the castle. You can easily break the grandmother with a big hammer or scrap to do without hacking. It is enough to repel the jumper by the metal of the metal. But this method does not work if the device is made of high-quality steel.

Attention! There are two ways to open a mounted castle associated with the grooves of the design. There are several springs inside the device. The arrow opens when the springs take a certain position. But this is not a difficult program, but the most common mechanic.

You can take a teaspoon and overtake it with a handle in the larva of the castle, and then knock the hammer on the other side. A spoon will enter the nest. Spring breaking, open the door.

On disk and code locks there is a system that leads to a jamming device when you try to open.

But in the manufacture of mounted locks, the manufacturer does not pay much values. If the locking mechanism is small, the spoon and the hammer can be replaced with a hunting knife.

The nest can be unscrewed. For this you need a self-tapping screw and a screwdriver. With the help of a screwdriver in the lock, the screw is screwed up, the bolt head remains on the surface. Lomik is used as a lever. The subject gets out of the nest, and the door opens.

To break the handle, use the horn keys. Position the keys so that the arrow is between the horns of the keys. Tools will touch with each other. Divide the opposite ends in different directions and when the keys are woined, press. The handle will break or depart from the nest. In the same way, it is possible to quickly break the suspension lock, using a hammer and mount.

How to hack the castle, leaving it whole?

Opening a hinged lock without disrupting integrity is a task for an experienced locksmith. There are two ways that can be used for this purpose, but they require skills and patience.

For the first it will take a 4x10 aluminum strip in size 4x10 cm. The strip is drawn by three parallel lines on 5 parts. The middle line will share the strip in half. Then the lower half vertical stripes must be divided into 5 parts.

From the end of the middle vertical strip, it is necessary to carry out a line before crossing the adjacent vertical and horizontal strip. Then mirror repeat it with the second vertical strip. It turned out a triangle. It must be trimmed with scissors.

Then the rest of the strip is folded so that it is convenient to stay with your fingers. How to do it, everyone decides himself.

Then the flat tip of the triangle rests on the gap between the handle and the nest in the place where the arrow is inserted to close the lock. With an effort, the triangle is inserted into this hole, and the handle opens. Now you know how to open a hinged castle.

You can use the paper closet and women's invisibility. Invisible need to eat pliers into 2 parts. Then the place of the cut is flattened. The latter is inserted into the lower part of the hole on the lock, then bends. You need to check the hairpin several times, and then use the straightened clip.

The clip is inserted until it stops into the deep part of the hole. After that, the hairpin must be extended from side to the side, pressing the bottom of the nest. If everything is done consequently instructions, the design will open, and the lock can be removed. This method opens a mechanical lock, but it is not always possible from the first time.

Tips and recommendations

Even if everything is done correctly, the nest is loosened and will not hold tightly with a heart. It is better not to use the device after opening, and to apply the lock to the opening only if the key has lost.

Important! The method of opening depends on the quality of the alignment and the manufacturer. Chinese mechanism can be shot down independently, but with German models it is worth being delicate.

Metal can be repeated. This is only a matter of time.

Therefore, if none of the ways have worked, you can cut the old device with a hacksaw. But if it is cold, it is possible that the device just frozen. In this case, the design must be warm and under any circumstances do not try to repel - this is not the best tool in minus weather.

It is easier to disassemble a pen or wait for thaw, leaving the door closed.

Hacking the lock is not as difficult, but after that it often comes into disrepair. It is worth considering before the start of the procedure.

A source: http://vseodveri.ru/furnitura/kak-otkryt-navesnoj-zamok-bez-klyucha/

How to open different types of hinged locks without a key

Как легко сломать навесной замок?

To date, the old mounted castle is often found on the garage, pantry, attic or warehouse. The main advantage and the reason for the prevalence of the suspension castle is the low cost, simplicity of the design and with this reliability.

Open the door with such a lock if the key is lost is simply impossible, because The locking handle is made of steel, and garage, warehouse doors are usually metal.

Also often the reason for the impossibility of opening the door is the wear of the protective mechanism. Over time, due to regular use, its inner secret may simply deter. If the lock is hanging outdoors, due to the effects of external factors (moisture, frost), the formation of corrosion foci is simply inevitable. In this case, if there is no desire to use the Bulgarian and damage the canvas, anyone thinks about how to open the suspension castle.

In fact, this is a fairly typical problem. To solve it, many different ways have been accumulated. Many are resorted to a wash from aluminum banks. With the help of empty cans from under Coca-Cola, you can easily make a similarity of a shader. The hacking of the mechanism occurs by the middle tongue.

The discovery of the paper is the most effective and long-established method of working with the jammed hinged lock. The specificity is to get a bent clip, wire into a special retainer, which should be unwound and release the bracket from the base. In some samples, a button is provided instead of the retainer, the principle of operation is not very different. Bending the letter g wire, you need to insert into the well and slowly gently turn.

It is important to remember that during the rotation you should pay attention to the way that the mechanism turns the easiest.

Further uses the second same type of the bottom and is inserted into the top area of ​​the keyhole in order to find special pins, which, after detection, gradually lift. After all the pins are open, the lower lock is turning again.

In most cases, it is possible to independently open the suspension lock using a conventional pin, knife or special launders, which will be at masters or locks. You can familiarize yourself with how to open a semicircular hinged lock without a key in more detail on the appropriate video. Often with the help of the knee in the form of "Kocherga" it is important to assemble the required combination of the lock, which is represented as a set of conventional horizontal plates.

It should be noted that some models of mounted locks with a semicircular key are sufficiently resistant to hacking, so it is often its owners turn to specialized services.

How to open the attached code lock

In this case, there are several ways. The first and most common requires a combination selection. First you need to pull the locking handle until it starts putting on the wheels. After that, rotational movements should be done until the click and the lock appears.

The second method is more complicated. For opening, an aluminum plate will be required, which can be cut from tin cans. Such a semblance of a key is collected by the diameter corresponding to the width of the alignment. The plate is inserted into the hole located between the housing and the handle. At the very end, after completed procedures, it is necessary to apply some effort for final unlocking.

How to open the hinged disk lock

A characteristic feature of such a mechanism is the presence of non-pin, as in other models, but several disks with specific holes, significantly aggressive entering the inside of the room. So that the discs are located in the correct position it is important to choose the key with suitable grooves.

Hinged disk castle

Given the specificity of the design, with a minimum time loss to open the disk mounted lock without a key, you can only with a properly selected hod or a curved flat screwdriver, which you need to drive into the lock and turn with force.

How to open a blockage lock without a key

It is important to remember that the barn castle is called the samples that have a standard round meadow. Therefore, the garage locks of old samples often fall under such a category.

The castle of medium and small sizes, mounted on a wooden door, can be opened with a powerful way. For this purpose, a regular scrap is suitable. You need to see the instrument through the handclock and, applying the lever method, disrupt it.

Open the speaker lock described above will be more difficult, so it is worth using a fishing line or a string from the guitar. To begin with, it is required to press the door with a rubber, then the loop is made from the string, which you have to sleep in the well, circle around the pins and pull on yourself. For clarity below, a video is given.

How to open Apecs Castle without a key

For those who wondered how to open the mounted castle from such a manufacturer, any specialist will answer that the methods are practically no different from those that are given above.

It should also be noted that the products of the Apex company are designed for mass use and its price does not exceed the average. Therefore, hacking this mechanism does not take a lot of time and strength.

How to open a chinese mounted lock without key

Samples from Chinese steel are usually unstable to power influence. Steel of overhead locks are quite soft, so if there is a grinder, the opening process does not take a lot of time and time.

When exposed to scrap, it will be necessary to apply force, however, it is still important to choose the right angle.

A source: https://otomkak.ru/kak-otkryt-navesnoy-zamok-bez-klyucha/

Opening of locks: how to hack a mounted lock

Как легко сломать навесной замок?

It is difficult to find a person who is unfamiliar with the situation with the loss of keys from the castle. Attached lock only seems simple for hacking, but in fact modern products have a rather complex mechanism. After all, they often cover pretty expensive things: cars, tools, equipment and so on.

Especially if the castle is reliable, open it will not be easy. However, if you have the practice of possession tools, it is quite real. Perhaps it will take a lot of time, but at a certain level of perseverance, everything is possible.

How to open the mounted castle?

Many of us watched films about hackers and know that the clip or wire is the most common elements of any opener. This method has become a classic, but it is effective and in our time, because they can open almost any blockage castle, having a certain experience.

If you use clips, they need to be beaten by the letter "g". Insert one of them into the well and rotate until it hook the mechanism. After that, hold it down, and in the second paper stag in the upper part and try to find it the pins of the mechanism. They need to be raised in turn, and when they all will be raised, you need to turn the first tool. After that, the lock must open. The same can be done with any thin bending products from wire, such as hairpins, rush needles and other products.

Currently, there are many varieties of barn locks, so it is difficult to choose the specific method of opening. Some too simple, especially used in mailboxes and baggage. Often, for their hacking, it is enough just to insert a knife or a screwdriver into the well and turn with strength. Sometimes they break even if they strongly pull them with their hands.

Some locks have a complex design and before you know how to open the lock on the mounted, you need to deal with its design. Spring locks are often found. For their autopsy, it is necessary to use the appropriate tool (nail, wire or paper closure) suitable and try to influence the spring with it.

The lock with the cylinder mechanism is opened by the destruction of the lock mechanism. Usually helps screwing the long self-pressing in the disk cylinder, then the destruction of it with the help of a nail. Most often, they are made of durable metal, so it is better to use a screwdriver to screw the screwdriver.

However, often the use of such methods destroys the lock and it is impossible to use it more or it will be necessary to repair the mechanism. To open the barn locks, you can try to take advantage of the gentle way.

To do this, we take a solid tin can and cut off from it the upper and lower part. The remaining cylinder is then cutting in half along the length and cut out from one half the T-shaped figure. To open small locks, even a soft bank from under the cola is suitable.

The leg of this figure should have such dimensions to enhance the mood of the mounted castle. This leg must be bent a semicircle and push into the slot between the case and the handle and turn it out. After the tool passes a complete turn, you can pull the upside down and the lock will open.

If you have an experienced fitter among your friends, then you are incredibly lucky. After all, it will certainly have a special set of bars that can be easily opening the lock of any design without breaking it.

Quick ways of opening locks

Sometimes it is necessary to urgently get inside the closed room, from which there is no keys. How to open the hinged lock without a key in a short time? Very easy, you just need to break it.

Of course, with such methods, the lock will be unsuitable for further use, but sometimes there is no other choice. The easiest way is to use the grinder. Especially well this method works against Chinese products. Metal used in them is very easy to solve. However, putting a little effort, you can fill the cut of any lock, regardless of the manufacturer.

Cups of cheap locks can be copied with a hacksaw for metal, eat boltology or use a similar tool. While the expensive locks are difficult even to the grinder.

If you do not have a grinder at hand or simply do not have a number of sources of electric current for its power, then you should not despair. You can use a less elegant, although an equally effective tool. Surely, no one is difficult to find an ordinary scrap and apply gross power to it.

For hacking the castle in this method, it is necessary to place a scrap between the drying of the lock and the case, and with the force to lower the tool down from the reverse side. In this case, the side of the scrap, located on the side of the castle should rise. If you press with sufficient strength - the dust of any lock will fly out of the grooves, due to the effect of the lever. Instead of scrap, you can use a robust metal rod or a nail.

Opening the locks is a rather complicated procedure and therefore if you want to save the lock in good condition and save time, you should not attempt to open it yourself. You can always contact a special service that takes out the opening of locks. Experienced specialists will come to you in the shortest possible time and help you open any castle using special tools. At the same time, they guarantee that they will help make lost keys.

You can learn more about this on the Internet. For example, on this page you have the opportunity to get acquainted with the opening of the locks of http: // service-vrvskrytiy-zamkovo-voronezh.rf/vskritie-zamkov / or on another resource at your request.

Choosing a reliable attachment

After reading the article on how to open the hinged locks, probably, any owner will think about buying a more reliable means of protecting the premises. If you still managed to open the castle, you just need to buy a more reliable model. At the same time, put in a safe place a spare set of keys so that you can always open it, even with the loss of the main kit.

The castle must choose a large sizes with a sturdy thickness with a durable thickness. It is also important to choose the most modern mechanism that is able to resist the common autopsy methods.

P.S. My name is Alexander. This is my personal, independent project. I am very happy if you liked the article. Want to help site? Just look below advertising that you recently searched.

Copyright Muz4in.net © - This news belongs to Muz4in.net, and are the intellectual property of the blog, is protected by the law on copyright and cannot be used anywhere without an active reference to the source. Read more - "On Authority"

Have you been looking for it? Perhaps this is what you could not find so long?

A source: http://muz4in.net/news/vskrytie_zamkov_kak_vzlomat_navesnoj_zamok/2018-06-13-45945

How to spoil the door lock imperceptibly: Consider in detail

Как легко сломать навесной замок?Methods Pulling: what to do if the lock is not attached

The calm of the residents of the house or apartment depends on the reliability of the door lock. But there are situations when he wants to break it. This usually concerns not locking structures on its door, but a neighbor to take revenge on the inappropriate behavior. The article will tell you how to spoil the door lock imperceptibly, and if necessary, fix it.

Causes of conflicts with neighbors

Sometimes revenge covers a man with his head. But it should be applied, cold.

The reasons for it can be:

  • In an apartment building, frequent and big noise from merry companies that collect neighbors on top.
  • Tired of the neighbor, producing forever repair. And the buzzing perforator interferes not only to sleep with young children, but also brings an adult neurosis.
  • Gossip neighbors, envy.
  • Failed baby crying.
  • Dog Howl and Lai.
  • Smoking on the staircase, which leads to the seeping of tobacco smoke in the apartment.

If no persuasion and plea help to get rid of such troubles, the question arises, what to do? Often the first thing that comes to mind is to break the design - then the neighbor will not come out to smoke, guests will not be able to quickly get the guests.

Methods

Tip: Before spoiling with your own hands the door lock from a neighbor, a criminal code should be remembered, or rather his article, which is punished for intentional damage or destroying property.

You can spoil the element in different ways, they depend on the type of design and the presence of certain tools presented in the photo.

Types of locks for entrance doors

The most banal ways to spoil the door lock, are:

  • Pouring into the locking well of the instant glue . This composition instantly blocks all the functions of the device. Glue - a great option to break not only the built-in, but also a mounted castle. For some other options, look in the video.
  • Apply cold welding.
  • Filling the key well pins , toothpicks or other small objects.

Toothpicks in the keyhole

  • Hole clogging for coins key. It is easy enough to do in the suvalid structures that have large sizes of a keyhole.
  • Application of mounting foam , spoiling, both the element itself and the upholstery of the door.

Joining well mounting foam

  • Baptization of the mechanism of chewing elastic.
  • Screwing to the larva of self-building.
  • Special breakdown of a similar key in a keyhole . This often happens when the apartment is robbed when you want to choose the key to the lock.

How to break the door lock

  • Breakdown of the attached element using wrench.

Using wrench

Tip: To spoil the design imperceptibly, you need to push hard, but smoothly onto the door handle to the wrench before the appearance of a crunch. At the same time, the latch-tongue breaks and stuck in the opening between the door and the box, which leads to blocking.

Imperceptible breakdown by a wrench

Methods to eliminate breakdowns

The situation when the neighbor is damaged by damage, can return to you by boomerang. Then there is a question how to fix the design?

In this case:

  • To remove glue from the keyhole, you can try to use the means for dissolving it, which can be:
  1. Alcohol.
  2. Acetone.
  3. Vegetable oil.
  4. Vinegar.
  5. Soda.

Pouring acetone in the well of the castle

If this method is not effective, the larva of the lock will have to be replaced.

  • To remove cold welding, which is used similarly to glue composition, you can apply:
  1. Acetone.
  2. White Spirit.
  3. Petrol.
  4. Dimethyl sulfoxide.

Cold Welding Remedy

  • To pull the chewing gum from the castle, it is free to freeze his larch, and then remove pieces to remove the sharp item. The material will easily crumble.

Castle key debris

In order for the cost of the work is minimal, when a wreckage of a key in a keyhone is detected, you need to try to pull it out, and on two halves in the workshop to make a new instance.

Liberation of the keyboard

Instructions for the release of the keyhole offers:

  • In the locking well, the lubricant drops several times, wait until it is cut throughout the debris and the lock mechanism. It can be a rifle or machine oil.
  • The easiest way to pull the key from the disassembled lock. But this is if the door is open.
  • If a slice of a key is slightly sticking out of the well, it can be tried to capture with round-rolls, or tweezers, without applying a lot of effort.

Deleting a debris with the Kruglogs

  • You can turn in the slots between the keyboard and the debris from the top and below the two thin sequila and try to extract part of the key.
  • Jewelry, but a fairly effective way - the use of self-pressing. To do this, in the end, the fragment is drilled by a thin hole. It screws the self-sample diameter. Holding the item for a hat, neatly "surrounds" the chip from the castle.

In order to better present all operations related to the damage of the lock and its repair, you can carefully view the video in this article. And it is best to try not to quarrel with the neighbors, and repair the castle is carried out only in exceptional cases.

A source: https://sdelaidver.com/furnitura/zamky/kak-nezametno-isportit-dvernoj-zamok-534

To date, the old attachment is often found on the garage, pantry, attic or warehouse, about how to open it without a key, let's talk in this article. The main advantage and the reason for the prevalence of the suspension castle is the low cost, simplicity of the design and with this reliability.

Навесной замок

Open the door with such a lock, if the key was lost is simply impossible, since the keystone is made of steel, and the garage, the warehouse gate is usually metallic.

Also often the reason for the impossibility of opening the door is the wear of the protective mechanism. Over time, due to regular use, its inner secret may simply deter.

If the castle is hanging outdoors, due to the effects of external factors (moisture, frost) The formation of corrosion foci is simply inevitable. In this case, if there is no desire to use the Bulgarian and damage the canvas, anyone thinks about how to open the suspension castle.

In fact, this is a fairly typical problem!

To solve it, many different ways have been accumulated. Many are resorted to a small Aluminum bank laundry . With the help of empty cans from under Coca-Cola, you can easily make a similarity of a shader. Having hacking the mechanism is the middle tongue banks that need to be pre-breaking.

Open padlock

открыть замок скрепкой

The most effective and long-established method of working with the jammed castle. The specificity is to get a small bent closet or wire into a special retainer, which should be discontinued and release the bracket from the base.

In some samples, a button is provided instead of the retainer, the principle of operation is not very different. Bending the letter g wire You need to insert into the well and slowly gently turn.

It is important to remember that during the rotation you should pay attention to the way that the mechanism turns the easiest.

Further uses the second same type, clip or small stud. It is inserted into the top area of ​​the keyhole in order to find special pins, which, after discovery, gradually lift. After all the pins are open, the lower lock is turning again.

In most cases, it is possible to open the suspension using a conventional pin , knife or special launders, which will have masters or locks. You can familiarize yourself with how to open a semicircular hinged lock without a key in more detail on the appropriate video.

Often with the help of a mustache "poker" It is important to assemble the required combination of the lock, which is represented as a set of conventional horizontal plates.

It should be noted that some models of mounted locks with a semicircular key are sufficiently resistant to hacking, so it is often its owners turn to specialized services.

How to open the attached code lock

In this case, there are several ways. The first and most common requires a combination selection. First you need to pull the locking handle until it starts putting on the wheels. After that, rotational movements should be done until the click and the lock appears.

Навесной кодовый замок

The second method is more complicated. For autopsy, an aluminum plate will be required, which can be cut from tin can, even old. Such a semblance of a key is collected by the diameter corresponding to the width of the alignment. The semicircular plate is inserted into the hole located between the housing and the handle. At the very end, after completed procedures, it is necessary to apply some effort for final unlocking.

How to open the hinged disk lock

A characteristic feature of such a mechanism is the presence of non-pin, as in other models, but several disks with specific holes, significantly aggressive entering the inside of the room. So that the discs are located in the correct position it is important to choose the key with suitable grooves.

Дисковый замок
Hinged disk castle

Given the specificity of the design, with a minimum time loss to open a disk attached lock without a key can only be properly selected. Another option, open with a bent flat screwdriver, which you need to drive into the lock and turn with force, thereby break the mechanism.

How to open a blockage lock without a key

It is important to remember that the barn castle is called the samples that have a standard round meadow. Therefore, the garage locks of old samples often fall under such a category.

The castle of medium and small sizes, mounted on a wooden door, can be opened with a powerful way, essentially break it. For this purpose, a regular scrap is suitable. You need to see the instrument through the handclock and, applying the lever method, disrupt it. The barn castle is powerless before scrap.

Open the speaker lock described above will be more difficult, so it is worth using a stud, a fishing line or a guitar string. To begin with, it is required to press the door with a rubber, then the loop is made from the string, which you have to sleep in the well, circle around the pins and pull on yourself. For clarity, the video below shows how to hack this type of mechanism.

How to open Apecs Castle without a key

For those who wondered how to independently open the mounted lock from such a manufacturer, the methods that we led to above will be similar.

It should also be noted that the products of the Apex company are designed for mass use and its price does not exceed the average. Therefore, hacking this mechanism does not take a lot of time and strength.

Make sure, looking at the video:

How to open a chinese mounted lock without key

Samples from Chinese steel are usually unstable to power influence. Steel of overhead locks are soft enough, so if there is a grinder, it does not take a lot of strength and time to hack the Chinese lock. When exposed to scrap, it will be necessary to apply force, however, it is still important to choose the right angle.

Disk Castle

Добавить комментарий