Yandex Dzen.

Wedding is a pleasant thing, but cost. Especially often, all sorts of little things fit into the budget. Such details include the design of the wedding cortex. If you do not want to spend significant amounts on the decor, you can always make a decoration on the car for a wedding with your own hands.

Materials for decoration

The tuple can be decorated:

  • satin ribbons;
  • fabric from organza;
  • Fabric of fate;
  • artificial and alive colors;
  • various figures or dolls;
  • decorative wedding rings;
  • paper appliqués;
  • balloons.

These are the main materials, but the bride and groom can always add something to this list.

In the style of minimalism

Sometimes a small detail on the hood is able to replace the rest of the sieves. This style is called "simple and tasteful." Prepare a car in this key can be satin or ordinary ribbons.

Alternatively, the hood is made up with three stripes: red, white and blue, and the Russian flag is obtained. You can also choose a dominant tone and make a decoration of several tapes, such as red. The size must correspond to the enlarged twice length.

From the ribbons it is easy to soar roses. We need a meter of length to wind into the palm, leaving the edges of the free, then turn them into the resulting circle and tie. If roses are made of red ribbons, they will ideally look with black balls. The wedding machine, dressed up with woven ribbons and balls, looks stylish and tasteful.

How to decorate a wedding machine with your own hands: 5 ideas + master class

Bright ideas

If the wedding is far from the traditional genre, then decorate the car can be brighter materials. For example, make decoration made of artificial colors. To do this, you need to take plastic chamomile, disconnect them from stems and fix on the car. Make it is not difficult, buds are easily attached to the tape or tape. If on the wedding day to offer guests to help beautify the car, then it is possible to use real instead of synthetic colors. It will harmoniously look at the car, decorated not only by daisies, but also to toy butterflies. It turns out a whole field meadow.

How to decorate a wedding machine with your own hands: 5 ideas + master class

More flowers

If you like the idea of ​​floral design, then you can decorate the car with floral compositions. You just need to know how to decorate a wedding machine with colors.

To make the decoration independently need to be purchased:

  • Artificial flowers.
  • Colosum.
  • Leaves.
  • Decorative grid.
  • Material from a fate.

It is necessary to make a frame for the main composition. The basis may be a cardboard circle or a plastic ring. Next, these items are decorated with flowers and other decor objects. Wedding handicraft can be a round or linear form.

If your decoration happened in the form of a hemisphere, then the fatin will look in the form of a bride skirt. You can also do the skirt element yourself.

So that the car remains without scratches, it is better to soften with scotch. The finished decoration is fixed with a scotch or one ribbon stretched around the hood. All this can be made it with your own hands and at home.

Artificial flowers will replace real if the wedding passes in winter. More synthetic compositions are suitable if the transport is not too elegant inside and you want to decorate the salon. Among other things, this is a fiscal option than live flowers.

How to decorate a wedding machine with your own hands: 5 ideas + master class

Master Class: Large Wedding Rings

A rare wedding costs without larger wedding rings. This piece of decor is also easy to make himself. If you do not know how to make a decoration on a car for a wedding with your own hands, here's a step-by-step instruction. First you need to purchase materials:

  • Flexible hoses - about two meters;
  • Standard size batteries - three pieces;
  • Golden Tension Tape;
  • Tree rules - two pieces;
  • plastic flowers;
  • Scotch;
  • scissors;
  • Powerful glue.

The listed funds are inexpensive, the wedding ring attributes of its own production is greatly inferior in the price of shop.

Perform step by step instructions:

  • Divide the hose on three pieces of different sizes. The second and third part is the future model of wedding rings, but a big for the base.
  • Stick into each of the pieces, from one edge, on the battery, so that it can be seen on half, and connect with a free hole. For reliability, strengthen the adhesion of the sticky tape or glue.
  • Take the rings and line ribbon.
  • Secure the rings on the rules and connect them to the remaining piece.
  • You can add artificial colors to the rings to your taste. We usually choose beige shades, but you can experiment and give preference, for example, a decor of violet color. It turns out unusual.

That's all, the decoration is ready! It remains only to attach rings on the roof and you can go to the registry office.

How to decorate a wedding machine with your own hands: 5 ideas + master class

Fashion finish

If from all of the above, you did not find the answer to the question of how to decorate the car to the wedding with your own hands, then you still have several ways that do not require skills and are suitable when the wedding has already begun.

Decor from Fatin

Fatin decoration is a new fashion trend in car decoration. Options How to transform a car, applying material, great set. For example, slightly raise the edge of the material, making it like a veil or drape the whole hood. Speeciously covered with a huge bow of fabric. You can make a decoration in the form of a bow on the same day on which the marriage ceremony is appointed, because it is the easiest way of decor. In any form, fatin as a wedding fabric, looks great.

How to decorate a wedding machine with your own hands: 5 ideas + master class

Cheerful pumps

Another option how to decorate the car to the wedding with your own hands: Take the colored paper, scissors, tape and make a decoration called Pompon. Transportation with pomposi looks fashionable. With such a decor, it is better when all the celebration takes place in modern trends.

What does the pompona decor look like you can see in the photo:

How to decorate a wedding machine with your own hands: 5 ideas + master class

Decoration on a car for a wedding is always obtained by different, but exclusiveness and there are the main plus. Knowing how to decorate, you choose exactly what you need, and then your wedding will play bright colors.

Finally, we offer to see some interesting video of master classes on an independent decor of a wedding car:

The original article is available on the link: https://slovibuket.ru/svadebnye-aksessuary/kak-ukrasit-mashinu-na-svadbu.html

The cars are decorated with ribbons, bouquets and statuette. Often you can see a wedding consignment without these decor elements. But which of these options is considered the most popular?

How to decorate a wedding tuple?

In order to decorate transport to the wedding, you do not have to spend money on masters. This can be done with your own hands.

The balls and ribbons are considered popular options for designing a cortex. Last time, pictures are used to be successful among decorations, to perform only paint and stencils.

When making auto elements, you should not overdo it, since then the holiday will look ridiculous and disgusting.

Decoration of a wedding machine ribbons

Decor with ribbons, flowers, butterflies and toys

Often in decorating the tuples use live flowers, but not always newlyweds remember that sooner or later such a scenery can start, and after a few hours a luxury car will look sorry. In this case, you should come up with a quick replacement of sluggish colors.

If you use ribbons, decorative butterflies or toys, it is worth being careful, since when using poor-quality glue or a strong fixation substance, you can harm the property - both your own and someone else's.

The most optimal is the decoration of ribbons, you can create all: bows, bouquets, patterns, etc. At the same time it is worth mounting ribbons on light glue.

How to decorate a wedding car with flowers and fat

Machine decoration with flowers and fat

If you do not want to spoil your composition with sluggish bouquets, you can use artificial compositions that do not differ from the present. Such flowers are easiest to use on the hood.

If you want the car looks more luxurious, an additional element can be added to the composition. Fatin is perfectly combined with plants. It is necessary to attach the material to the tips, then it will seem light and air, will not fit to the surface.

Decor of door handles

The car handle is not always worth bothering various decorations. It will be enough to use a ribbon or decor made in the basic design style.

Also on the handle you can attach small bows from the fate, tapes and other girlfriends.

Decoration of the bride and groom machine

How to dress the car of the bride and groom

The main car at the wedding is the car of the bride and groom. Auto must stand out against the background of the tavern. Most often, the vehicle is made in one style.

The vehicle of the newlyweds is isolated by heart, rings, bouquets, various romantic compositions, as well as balls and tissues. On the hood you can place dolls, swans or lovers of bears.

Wedding rings on the roof

Rings on the roof

Wedding rings most often placed on the roofs of cars, but without an additional decor, they look sullenly and not harmoniously. They are often equipped with alive flowers, they create a romantic setting and give the composition of tenderness.

Also as an additional decor, balls are used, but they should not be inflated too much so that they do not fall asleep at the time of contact with the car.

Kind decoration

If you do not want to bother about the decoration of the car's hood, then you should just fix several ribbons on it, but on the background of the taper it looks cheap. That is why a composition of flowers, butterflies and other decorations are installed on the hood.

When decorating the hood, you always try to create a specific figure, you can also decorate tapes with flowers, bows and butterflies.

Decoration of trunk

The trunk of the vehicle is often untouched, but the newlyweds can make a drawing or a sticker on the rear window of the car. Also, sometimes tapes are used on it. Rarely on the trunk of the car you can see the composition of the hearts in the form of a heart.

Registration of the door

Regarding the doors, they are trying to make them minimally, since when opening the balls, they can burst, and ribbons or flowers - to break. Use only door handles, decorating them with bows or flowers, sometimes tapes are attached from above.

How beautifully decorate the car on the wedding guests

Car guests

If you order a wedding tuple, then worry about how the car will be decorated, it is not worth it, because in this case everything will be performed in one style.

If the car belongs to everyone from the guests, then it is worth going to this issue carefully. You should talk with newlyweds and ask what style they use to design their own cars.

The car is distinguished by the fact that it should have a minimum of jewelry. It can be a small composition of colors, balls or tapes. It should be remembered that the decorations on different cars look different, as it all depends on its color and brand, which is why you should have several options for design.

What else can you decorate the wedding car?

In addition to basic jewelry, you can use hearts made of tapes and live flowers, inscriptions and drawings, floral compositions of paper.

Now the fashion has reached the fact that the wedding cortices are painted by various patterns and paintings, but for this there should be good weather.

Outfits with magnets

If you are tired of ordinary and boring scenery, then you can use magnets that have many advantages.

  1. Do not leave tracks by car.
  2. Do not change due to weather conditions.
  3. Can be used on any part of the car.
  4. You can cross and use reuse.

Despite these advantages, there are disadvantages.

  1. They are not voluminous, due to which they do not develop in the wind.
  2. Magnets will need more than ordinary decorations, which will hit the pocket of the newlyweds.

Color design option

Flowers can be used not only on hoods and trunk, but also on the roof together with rings. Small bouquets of living or artificial colors can be used on door handles.

Wedding stickers

Wedding stickers for decorating a wedding machine are used for window decor. Stickers can also be attached to the hood of the car and side doors and windows. Stickers with the silhouettes of the bride and the bride glue the newlyweds to highlight the car.

Make a wedding decoration with your own hands can anyone. Choose an idea, and make a wedding unique.

Wedding is an excellent celebration that happens in the life of every person. In order for this event is perfect, you need to take into account all the little things, ranging from the repurchase of the bride, and ending with the design of the hall for the celebration.

  • Decoration of a wedding cortex is an important moment, because in cars guests and bride and groom will drive
  • The task of registration of cars is to create a special mood - holiday, luxury and splendor
  • Wedding machines are an integral attribute of any wedding ceremony.

How to decorate the car with ribbons for a wedding with your own hands?

How to decorate the car with ribbons for a wedding with your own hands?
How to decorate the car with ribbons for a wedding with your own hands?

Stylish and original decoration will be able to use a combination of different textures and materials. Together with ribbons, it is often used to design cars or atlas. Fabric composition looks presentable and festive.

How to decorate the car with ribbons for a wedding with your own hands? There are several ways:

First type of decoring

  • Take a tape size of 2 hood lengths, and width from 3 cm to 5 cm
  • Stretch the ribbon through the radiator grille so that the average metal bar of this lattice was exactly in the middle of the tape
  • Stretch the tape in different sides of the hood to get the letter V, and secure it under the hood of a scotch tape or a lumber. You can bind to any inner hood detail
  • Now make bows or flowers of small organza or atlas. How to make original bows, tells in this article
  • The number of bunches depends on your fantasy: a tightly located decor on the tape or at a distance of 10-15 cm. Secure the bows on the ribbon with a thread with a needle. Between the colors, tie the tape cuts into the tone of colors (white or pink). When driving cars, they will develop beautifully
  • Make a large bow of white organza from cut slicing, and attach it to the radiator grille. Ends of this bow must hang up almost to the level of wheels
How to decorate the car with ribbons for a wedding?
How to decorate the car with ribbons for a wedding?

Instead of a bow on the radiator grille, you can attach a bouquet of artificial colors.

Machine decoration with ribbons for a wedding with your own hands
Machine decoration with ribbons for a wedding with your own hands

Behind the car, make the same bow as in front, and attach it to the trunk door. If there are many colors on the hood, then a small bouquet of flowers will look at the back.

How to decorate the car with ribbons with your own hands?
How to decorate the car with ribbons with your own hands?
How to stylishly decorate the car with ribbons for a wedding with your own hands?
How to stylishly decorate the car with ribbons for a wedding with your own hands?

Remember: All decorations on the machine must be made in one tone. It looks ugly when the white-pink decoration is on the front, and the back of the blue.

How interesting to decorate the car with ribbons for a wedding with your own hands?
How interesting to decorate the car with ribbons for a wedding with your own hands?
How to decorate auto ribbons for a wedding with your own hands?
How to decorate auto ribbons for a wedding with your own hands?

The second way to decorate

  • Take the segment of the atlas or organza width 20 -30 cm. The length should be two lengths of the machine hood
  • At a distance of 30 cm across the entire length of the cut. Attach flowers from satin ribbon.
  • Attach the decoration on the hood and the trunk door

Third way to decorating wedding machines

How to decorate the car with air ribbons for a wedding with your own hands?
How to decorate the car with air ribbons for a wedding with your own hands?
  • Make flowers from white and green satin ribbons
  • Several colors assemble in a bouquet, and 7 or 9 pieces leave for ribbon decoration
  • Attach 4 air ribbons to the bouquet, and secure them under the hood of the car. A bouquet must also be attached with a tape
  • Along the entire length of the tape distribute flowers and secure them

How to make a decoration on a tuple with your own hands, is shown in the following video.

Video: CAR Decoration_Option B

Variants of jewelry from ribbons are presented in the video below.

Video: Decorations from ribbons on the car

Big bow on the wedding car do it yourself

Big bow on the wedding car do it yourself
Big bow on the wedding car do it yourself

Make a bow can every woman and even a man. It is enough to take a large cut of a fate, fold it and arbitrarily tie. It turns out a beautiful bow, but it must be attached from all sides to the car scotch, otherwise this beauty will develop in the wind, having lost its original form.

It is much stronger and more beautiful to get a blank from a floral felt. Stages of creating a big bow on a wedding car with their own hands:

  • Take the segment of the felt of the desired size
  • Fold his edges to the middle and stick, or the trick
  • Collect the harmonic workpiece and link the ribbon in the middle
  • Now take the cut of the felt of a smaller size of another color. Do it the same with him as with the previous workpiece
  • Fold the bows together and tie the ribbon in the middle
  • In the middle of the Sew Golden Butterfly, Heart or Flower - Bow

The following video is clearly visible as the designer folds and collects the blanks together.

Video: Easy, fast, cheap! Bow giant from felt do it yourself for a wedding machine

How to decorate the hood of the wedding machine with your own hands?

To make the decoration of the wedding machine, you do not need to be a designer. It is enough to have an idea, and be able to keep a thread with a needle in your hands. You do not need to sew on a sewing machine, make the decoration easily manually.

How to decorate the hood of the wedding car with their own hands talked above. Here are some ideas as you can still decorate the car from the front:

How to decorate the hood of the wedding machine with your own hands?
How to decorate the hood of the wedding machine with your own hands?
How to decorate the hood of the wedding machine?
How to decorate the hood of the wedding machine?
How to stylishly decorate the hood of the wedding machine with your own hands?
How to stylishly decorate the hood of the wedding machine with your own hands?
How to decorate the hood of the wedding machine yourself?
How to decorate the hood of the wedding machine yourself?
Wedding car hood decoration options with their own hands
Wedding car hood decoration options with their own hands
How to decorate the hood of the car with your own hands on the wedding?
How to decorate the hood of the car with your own hands on the wedding?

Decorations on the handle of the car on the wedding do it yourself

Decorations on the handle of the car on the wedding do it yourself
Decorations on the handle of the car on the wedding do it yourself

Door handles on wedding cars need to be decorated with flowers or bows into the tone of other decorative elements on the tank. Prepare the materials that you stay from the decoration of the hood and the trunk doors. Add a floristic grid, a bit of atlas, felt and other fabrics that are in the house.

Decorations on the handle of the wedding machine
Decorations on the handle of the wedding machine

Perform such steps to make decorations on the handle of the wedding machine with your own hands:

  • Take a cut of an organza size 25x70 cm
  • Collect the bow: Left hand Sweep the fabric between the two fingers of the right hand. Secure it in the middle of elastic
  • Make the second same bow. Create two parts and tie a few ribbons of one or two colors.
  • In the middle of the bow. Sweet flower from satin, heart or other decorative element. For fastening parts, instead of a needle with a thread, you can use superclauses

Tip: This method is suitable for creating jewelry on the knobs of felt, atlas or floral mesh.

Look visually how to make such a bow, in the following video.

Video: How to make a bow yourself on the handle of the wedding machine?

Length hood machine for wedding jewelry

Length hood machine for wedding jewelry
Length hood machine for wedding jewelry

Each brand of car has certain hood sizes. Making a wedding decoration of the car need, leaning on the size of the hood and its other parts.

First measure the length of the hood of the machine for wedding jewelry, and then proceed to their creation. Sizes of the hood of some car brands:

  • Toyota "Avalon": length in the center of the hood 105 cm, near the headlight 95 cm, width 145 cm
  • Mercedes "W212": Length 175 cm, width 150 cm, near 80 cm headlights
  • Ford "Focus": Length 80 cm, width 60 cm
  • Audi A3: length 100 cm, width 150 cm

Important: To prevent an error when creating jewelry, first measure the length and width of the hood of all machines that will be in the contention. Based on these size, the neck ribbons and another decor.

Decoration on the roof of the wedding car do it yourself

Decoration on the roof of the wedding car do it yourself
Decoration on the roof of the wedding car do it yourself

The traditional decoration on the roof of the car is two rings in colors. But now you can find a wedding consignment with hearts, a basket of flowers and another decor.

The decoration on the roof of the wedding car in the form of two rings is easy to make it yourself. To do this, follow these steps:

  • Cut the soft water hose to 3 parts of different sizes. The small and middle part will be rings, and the largest item is the base for the design.
  • In one end, insert the battery, hold it with your finger. Then put on her the second end of the hose and secure the joke of scotch
  • Make this principle the second ring
  • Wrap the rings with gold floral foil
  • With the help of a superclaus, pick up two rings. Stick them to wooden rules by 15 cm, and secure the workpiece on the biggest third hatcher
  • Live or artificial colors decorate the design. Accessory ready. Attach it to the roof of the machine with a scotch
Stylish decorations on the roof of the wedding machine with their own hands
Stylish decorations on the roof of the wedding machine with their own hands

There are many other options for decorating the machine newlyweds:

Decoration on the roof of the wedding car do it yourself - swans
Decoration on the roof of the wedding car do it yourself - swans
Decoration on the roof of the wedding machine with their own hands - hats
Decoration on the roof of the wedding machine with their own hands - hats
Decoration on the roof of the wedding machine with their own hands - Hearts
Decoration on the roof of the wedding machine with their own hands - Hearts
Decoration on the roof of the wedding machine with their own hands - Pigeons
Decoration on the roof of the wedding machine with their own hands - Pigeons

In the following video, you will see many other options for decorating the roof of the newlyweds machines.

Video: Decorations on the roof of a wedding machine

Rings on the car for the wedding do it yourself

Rings on the car for the wedding do it yourself
Rings on the car for the wedding do it yourself

Modern fashion on the decoration of wedding cars has gone so far that many people already prefer not to just make rings on the cars of the newlyweds. They come up with original decorations, which emphasize the individuality and high status of future husband and wife.

Make a crown with a fet of rings on a car for a wedding with your own hands:

  • Make 6 rings: 2 - small, 3 - medium and 1 - large. Perform this decor according to the principle described above, as for two rings made of soft hose and special foil
  • Stick blanks on a ruler 50 cm long
  • Attach the resulting design to the roof of the machine
  • Make a design decor in the form of flowers in front and fate from the back - the original decoration from the rings is ready
Rings on the car for a wedding with your own hands - crown
Rings on the car for a wedding with your own hands - crown

Tip: The crown can be made of cardboard, painting it in gold or silver. Do not be afraid to fantasize, and your wedding will be remembered for guests for a long time!

Decorations on mirrors of wedding machines

Decorations on mirrors of wedding machines
Decorations on mirrors of wedding machines

Now the car mirrors are decorated in the wedding cortem, they used to be only a decor for the hood and roof. Decorations on mirrors of wedding machines make the same as decorations on the hood. Thanks to this, the whole decor in front of the car will be harmonized.

Beautiful decorations on mirrors of wedding machines
Beautiful decorations on mirrors of wedding machines

Tip: If you made a bouquet of 15 colors on the hood, a bouquet of the same colors is suitable for the mirror, but smaller. In terms of the number of 5 or 7 pieces.

Flowers and bouquets on the wedding car do it yourself

Flowers and bouquets on the wedding car do it yourself
Flowers and bouquets on the wedding car do it yourself

To create a bouquet you will need cardboard, superclauses, artificial flowers and a little pattern of contrasting color. Cardboard is necessary for the basis for which the entire bouquet will be attached.

So, make flowers to make bouquets on the wedding machine with your own hands:

  • Cardboard cover with cloth and secure with scotch or glue
  • At the edges of the foundation, there are large, and in the middle of small flowers. Enclose one large bud in the center, but you can do without it. Do everything as tells you fantasy
  • If leaves left the colors, stick them along the edges of the workpiece
  • Now attach a bouquet to the ribbon on the car - the decor is ready
Flowers and bouquets on the wedding machine
Flowers and bouquets on the wedding machine

Tip: Beautifully look a bouquet of contrasting colors, for example, white and red, pink and red, white and pink and so on.

Video: Wedding boutonniere on the door of the car do it yourself video master class

Video: Decoration on the wedding machine with your own hands.

How to decorate a wedding car with your own Fatin?

How to decorate a wedding car with your own Fatin?
How to decorate a wedding car with your own Fatin?

As mentioned above, along with the ribbies, the machine of newlyweds decorate fatin. From it there are bows, flowers, imitation of Fatas and another.

Here is another way to decorate the wedding machine with your own fatin - pumps attached to the satin ribbon:

  • Cut the fatin to rectangles 10-20 cm wide, depending on the size of the pump, 50 cm long
  • All rectangles fold together and add one rectangle of contrasting color.
  • Fold the fabric of the harmonica
  • Mid attach ribbon
  • Disappear each layer so that the workpiece gets lush
  • Cock the edges by semicircle or zigzag, according to your imagination
  • Straightens all the layers again - Pompon is ready

In the video, the designer tells how to make a beautiful pompon from a fate.

Video: How to make pumps from a fate?

Another way to make pompon from a fate name is described in this video.

Video: How to just make a pompon from a fate - DIY style - Guidecentral?

How to make a heart on a wedding car with your own hands?

How to make a heart on a wedding car with your own hands?
How to make a heart on a wedding car with your own hands?

Newlyweds like to decorate the car with big hearts, because this is a symbol of long and real love. Make such a heart is easy both from artificial colors and from living roses.

Important: If you do such a decor from a living material, then choose fresh, just blossomed buds. Otherwise, flowers can quickly plant.

How to make a heart on a wedding car with your own hands:

  • First, make the basis: Cut the heart out of paper, and then transfer the pattern to the cardboard
  • Apply glue into the cardboard heart. Combate old newspapers or sheets of magazines, straighten them a bit, and attach them to the cardboard blank with glue - it is necessary to give the volume to the heart. When the entire cardboard is filled with paper lumps, creek all the workpiece with scotch
  • Wrap the future heart with red lining paper or floral felt, and secure all the edges in the stapler
  • Colors Cut the tails to get a smooth base
  • Now one flower glipe to a red blank, tightly pressing flowers to each other.
  • When the whole heart surface is filled with flowers, sprinkle buds with water and sprinkle with floristic gloss. After that you can attach a heart to the car
  • On the same technology, make a white heart, but the paper workpiece does not make a red, but a white cloth

In the next video, it is shown how you can make a big heart from tissue roses, which are also made with your own hands.

Video: How to make a big heart with your own hands?

Decoration of a wedding machine with your own hands step by step

Decoration of a wedding machine with your own hands step by step
Decoration of a wedding machine with your own hands step by step

Wedding troubles are pleasant, but this bustle knocks a little from the gauge, and the newlyweds themselves and their parents often do not know what to start and where to start, for example, when decorating machines. Step-by-step stages will help to outline the front of work and their sequence.

Decoration of a wedding machine with your own hands step by step:

  • If the machine is decorated with fatin and artificial flowers, then you need to make roses buds in advance
  • Measure the length of the hood and cut the desired size of the tape or fate. Prepare a lumbering gum for strings
  • Make two rings on the roof, as described above, or any other decor
  • Of the smaller colors, perform bouquets for the handles of the car and its mirrors
  • If there is a basket with flowers on the trunk door, then do it in advance. How to make such a basket, read in the article about bouquets do it yourself
  • If on the idea on the door of the trunk, the bow will be located, then buy fatin in advance, and make this decor
  • In the morning, on the wedding day, begin to make a design from the hood of the machine: pull tapes or fatin, and secure under the hood. Attach flowers along the entire length of the tape, and install a bouquet with flowers on the radiator grille
  • Now proceed to the design of the back of the machine: secure the ribbon, stapler or using a scotch to attach a bow, or set the basket with flowers
  • Machine roof: Install the design with rings or other decor, secure it.
  • After that, you can proceed to the design of door handles and mirrors
  • Check if all the details are fixed well. If there are doubts, strengthen the mount, because it is important that the designs and bouquets are set beautiful, correctly and firmly

How to fix the fabric on the hood of a wedding machine, and attach decorations?

How to fix the fabric on the hood of a wedding machine, and attach decorations?
How to fix the fabric on the hood of a wedding machine, and attach decorations?

The hood of the newlyweds machines should be decorated flawlessly, because on this part of the wedding car, people immediately pay attention when the tuple drive up to the house of the bride or to the registry office.

How to firmly fix the fabric on the hood of the wedding machine, and attach the decorations? Some nuances should be taken into account:

  • A high-quality car decoration for newlyweds is a difficult task that requires certain skills and devices. But you can cope with it yourself
  • In order for the tapes well on the hood, it is necessary to process one edge and sew a lump band. The second end of the gum is tied with a ribbon under the hood or sewn to another edge of the tape
  • Attach the decor on ribbons (bows, flowers and other) with the superclone
  • Large decorations in the form of hearts, baskets with flowers or bouquets, tight tight to parts of the machine: to the grid of the radiator, to the handles and mirrors
  • To attach a big bow on the trunk door, tighten the tapes first, and then tie them a bow

Wedding Machine Decoration Live Flowers

Wedding Machine Decoration Live Flowers
Wedding Machine Decoration Live Flowers

Living as decor on the car look great. They create a special festive energy, publishing a unique fragrance.

If you think that dolls, artificial flowers and just a few ribbons on the hood, it is trite, then make a decoration of the wedding machine with live colors.

Important: A bouquet of fragrant roses by the bride, flowers in her hairstyle, the decoration of the hall with living bouquets and decoration of the machine of newlyweds with fresh, recently torn buds, will emphasize the high status of the young.

Tip: If the machine is large (convertible or limousine), decorate it with flowers from the inside. Unique fragrance will accompany you all the way.

Even delicate flowers will withstand the test by movement, if used to prepare a special sponge with water to compile bouquets. You can buy it in any flower shop.

Tip: Place the decor in such a way as not to close the driver's review.

If you think that yourself you will not work out such an original decoration, refer to the experienced florist, which knows the language of colors and disassembled in the decor.

Wedding Machine Decoration Balls

Wedding Machine Decoration Balls
Wedding Machine Decoration Balls

Balloons are the most inexpensive view of the design of the wedding cortex.

Tip: Buy only high-quality latex balls from proven or well-known manufacturers. Chinese analogs can be used when moving machines.

Decoration of wedding machines with balls just make it yourself:

  • Make the garland from the balls, tieting them to each other. Make this decor from the balls of two colors, for example, red and white, pink and white and so on
  • Tie the garland on the hood of the machine and for several of these products to the door handles and mirrors

Remember: decorations should not interfere with the driver while driving!

If you plan to make a retro style or the subject of your celebration "Love IS ...", then the design of the car balls will be the brightest decoration for the taper.

How to make a heart from the balls, describes in detail in the following video.

Video: Heart from the balls - decoration of weddings

How to dress, decorate the car of guests to the wedding?

How to dress, decorate the car of guests to the wedding?
How to dress, decorate the car of guests to the wedding?

Much attention to the design of the wedding cortex is given to the decor of the machine of the newlyweds. Therefore, the question often arises: how to dress, decorate the car of guests to the wedding?

Remember: All machines must be decorated in one style.

The guests have enough to attach bouquets with flowers on the door of the handles and mirrors. If you want, then you can separate the hood with ribbons. In any case, the machines for guests should look more modest than cars with young.

Examples of decoration of wedding machines: photo

Think up the decoration of the machines in advance so that before the wedding itself does not fuss, experiencing about what design will be, and what materials to buy.

Here are examples of decoration of wedding machines - Photo:

Examples of decoration of wedding machines: photo
Examples of decoration of wedding machines: photo
Examples of decoration of wedding machines
Examples of decoration of wedding machines
Examples of stylish decoration of wedding machines: photo
Examples of stylish decoration of wedding machines: photo
Examples of interesting decoration of wedding machines: photo
Examples of interesting decoration of wedding machines: photo
Examples of stylish decoration of wedding machines
Examples of stylish decoration of wedding machines
Examples of the original decoration of wedding machines
Examples of the original decoration of wedding machines
Examples of unique decoration of wedding machines: photo
Examples of unique decoration of wedding machines: photo
Examples of decoration of wedding machines - balloons
Examples of decoration of wedding machines - balloons
Examples of decoration of wedding machines - heart with an arrow of balloons
Examples of decoration of wedding machines - heart with an arrow of balloons
Examples of decoration of wedding machines do it yourself
Examples of decoration of wedding machines do it yourself
Examples of decoration of wedding machines - Swans with rings
Examples of decoration of wedding machines - Swans with rings
Examples of decoration of wedding cars living colors
Examples of decoration of wedding cars living colors
Sample Wedding Machine Decoration - Care With Flowers
Sample Wedding Machine Decoration - Care With Flowers

Options for decorating machines, and even a wedding carriage is a pretty set. Choose the appropriate option, add your fantasy, and create real designer masterpieces!

Video: Original and beautiful decoration of wedding machines.

During the preparation of the wedding ceremony, the decor not only the banquet hall, but also a wedding Car cortery .

You can decorate in the car everything: the hood, door handles, roof, trunk, hang decorations on the mirrors, the main thing is that it does not look too overloaded. That is, it is better to choose one or two places where the decor will be. Most often decorated Hood and roof .

General advice

When choosing a decor, it is important to remember about several common rules regarding wedding vehicles:

  1. Auto bride and groom should be preferably white or black.
  2. Guests can be of any color, but in the column it is better to first walked models of white, black and silver colors, and after them brighter shades.
  3. It is better to use decorations of no more than two or three colors, more colorful gamma will look amilateral and tasteless.
  4. All items should not blame the driver's review.
  5. If the machines are rented, then you need to clarify whether to decorate them and what. It is advisable not to choose too sticky decor, so as not to leave traces.
  6. The style of the entire price should be one.
Caution decoration with flowers
Stock Foto Simple and beautiful wedding machine decoration with their own hands

What can be used for the decor to just and tastefully decorate cars for a wedding with your own hands:

  • ribbons from any material;
  • Fabrics: Chiffon, Fatin, Organza;
  • Flowers: Live or artificial;
  • Balloons;
  • figurines and figures, plush toys;
  • Paper decorations: pumps, posters, appliqués;
  • Comic rooms with inscriptions and drawings.

Decoration of the car with your own hands to the wedding is the essential economy of the budget of the young, especially if you take a car for rent. Plus - this is an opportunity Show fantasy and creativity, having achieved exactly the result that I want.

Master class decoration machine for a wedding fatin with her hands

Fatin Quite often used as decoration of wedding cars - this is a relatively inexpensive fabric, and it looks gorgeous as part of the wedding decor.

As a rule, the most common tissue is used as the decor of the hood or roof

The fatin car hood decoration is very simple - the fabric of the desired color is stretched diagonally from the windshield to the bottom of the hood so that it expands it below. The lower part of the fabric slams the hood, the upper angle can be attached to the rubber glass to the side glass or fasten to double-sided adhesion. One cloth will look incomplete, so it must be supplemented with flowers or balls. Another version of the decor is two fire strips, stretching from different sides of the car to the center of the hood.

Wedding Machine Decor Fatin
Stock Foto Decoration Machine on a wedding from a fate with your own hands

In this case, a two-way tape or a rubber branch will help again. Fire strips can be tied with ribbons at an equal distance from each other or decorate flowers .

How do you make your own hands the decoration on the wedding machine?

Wedding decor can be easily made with their own hands, the main thing is a bit of patience and perfection. One of the most popular jewelry on the car is, of course, big Wedding rings on the roof of the car .

Master class how to make gold rings on auto

For rings you will need: Corrugated tube 2 meters long, foam, bright gold color tape, tape, glue, scissors.

Independent decoration of a wedding car
Golden Rings on the Wedding Machine

Stages of work:

  1. Corrugated pipe must be cut into two parts and connect to the ring. Credit scotch.
  2. C wind ribbon ribbon: here you can show fantasy and use not only gold color.
  3. Two finished rings need to be glued together and wrap scotch.
  4. Then the foam is taken: it is necessary to attach ready-made rings. The whole design is going together - fixes on glue and is additionally decorated with cloth, flowers and ribbons. For better clutch, the corrugated pipe can be swipped with a needle.

Very nice look satin ribbons On the hood of the car, besides, it is very simple. What you need: Satin tapes of the desired color, scissors, floral compositions for decor.

Stages of work:

  1. From the tapes are cut off the desired cuts in the size of the hood plus a little on the mount.
  2. Ribbons are attached to the hood in the desired order - the painter, from the edges to the center or vertically side. You can attach on tape or gum, pressing the lower edges with a lid.
  3. Fastened ribbons decorate with flowers. Decoration is ready.

Miniature boutonnieres will become an excellent decoration of the handles of the doors, they can be attached to the same satin ribbons. The hood or roof will decorate the figures of the groom or the bride, or the paired swans. And you can make a heart from paper napkins .

How to make step-by-step cute hearts from napkins? To work, you will need: napkins of the desired color, cardboard, glue, stapler, scissors, pencil, double-sided tape.

Stages of work:

  1. From the cardboard you need to cut the heart of the desired size and separately the strip for the sides.
  2. Stripe lay along in half, at the bottom of the bottom of the cuts for fastening scissors.
  3. Attach the strip to the base of the cut side down on double-sided tape so that flights come out.
  4. On 3-4 napkins with a pencil, you need to draw mugs and strain them with a stapler, cross-cross. Then cut the resulting circles and leave the layers, smile to them with your fingers so that the petals were obtained.
  5. Finished roses stick to the glue to the base, tightly having them to each other. Paper heart is ready.

Independent decoration of wedding car flowers

Flowers - in the Decor of the Corger, they must be! Of course, Live flowers look fresh And better artificial, but in the case of decorating the car, it is better to make a choice in favor of the latter - they will retain their appearance longer.

How to make flowers with your own hands? Very simple. The main thing is to stock the necessary materials: cloth, wire, floristic ribbons, glue and scissors. Buds can be made from felt, fate, floristic paper or purchase ready-made artificial flowers.

How to make flowers on the wedding car
Corrugated paper buds on a wedding machine

Very interesting and gently look Corrugated paper buds . For such colors, you will need: sheets of corrugated paper, white, pink and green colors, scissors, glue, wire or skewers for stems.

Stages of work:

  1. Of the white and pink sheets, cut the petals of the desired size - depending on the type of bud, whether it will be a rose or peony.
  2. From paper to make the core for bud.
  3. Attach the stall to the wire or a skewer on the glue.
  4. Around the foundation to attach petals in turn, collecting a bud.
  5. From a green leaf cut striped for a stem and wrap it with a wire, fastening the petals. From the same sheet you can cut the leaves and also attach to the glue to the stalk. Bud is ready.

From corrugated paper you can make several colors for decorating the car.

How to make a bow on a wedding car?

Usually behind the car fasten the big Magnificent bow . Make such bows easier. For the manufacture, any fabric is useful: atlas, fatin, felt.

Master class, how to make a bow from satin literally in a few simple movements. For him, you will need: Slices of atlas, tape for fasteners.

Stages of work:

  1. The fabric needs to be straightened on the table or other solid surface.
  2. Then fold it three things in such a way that it turns out a strip. It is better to lay inside that the edges of the fabric are not visible.
  3. Stop the middle of the strip and bend the edges in such a way that they lay the crosswise, while the untouched part of the strip would remain between them.
  4. After that, the fabric in the middle is going together and dragged with a ribbon. To fix the edge, and the satin bow is ready.

Another variant of the bow is from felt. It will be necessary for him: felt of two colors, such as white and pink and different sizes, rubber, adhesive gun.

car for a wedding with a bow on the hood with your own hands
Felt Bow on Wedding Car

Stages of work:

  1. A large segment of felt needs to be added to the edges to the middle and grind the edges with a glue gun.
  2. Then, at the place of the adhesive, the fabric is assembled and dragged with a rubber band. It turns out a bow.
  3. From above, the second cut is superimposed and it is too similar to the assembly place in both cuts coincide. Once again dragged with elastic band.
  4. An elastic band can be closed with an atlantic ribbon or decor element, such as a decorative butterfly or flower. Bow ready.

And if you dress the car in a wedding hat?

Wedding hats - Groom cylinder and a hat or a bride's veil is also a great version of the decor of the car roof. How to make a hat with your own hands? Here you have to go a little, but the result will cost all the efforts spent. For hats you will need: Three Watman Sheet (one A1 and two A2), PVA glue, adhesive gun, glue moment, hats fabric (no less than 1 1.5 meters, preferably water-repellent), three meters white ribbon, newspapers, ribbon dense , cardboard.

Original wedding machine decor with their own hands
Wedding hats on the roof of a wedding car

Stages of work:

  1. Basis for a hat. From the leaf A1, two circles with a diameter of 26 and 37 centimeters are cut, with a margin on fasteners. The two remaining watman sheets are bonded between themselves in the shape of a tube with an adhesive pencil. Prepared circles are attached to it from two sides - it is a bottom and up of hats.
  2. PVA needs to be dissolved with water in proportion one to one. Then the newspapers are torn into small pieces, soaked in a cooked glue solution, and the base is neatly punched, according to the principle of papier-mache. The basis will need to dry at least a day. The edges can be given the shape, putting the basis in the pelvis and arming the edges up.
  3. While the base dries, you need to sew a case. A circle of 28 cm with a diameter of 28 cm is cut, two bands are one 12 cm wide and 1.5 meters in length, the second - on the shape of the base plus allowance for the seams. First, the main part is sewn, then a circle is sewn to it. After a queue of the edges. It is necessary to observe accuracy, first start the circle, then sniff out on the sewing machine or sew on your hands. Case ready.
  4. "Dress up" hat. The finished cover must be attached to the glue to the base so that the top glued, while not blurring the fabric and do not hook other parts. After that, the case dresses entirely and is attached at the bottom. The fields are better to glue point to preserve the folds.
  5. From the cardboard you need to cut the circle of the same diameter as the bottom, placing it with the main cloth and attach to the hat from bottom to the adhesive gun, additionally consolidate the ribbon.
  6. The hat is decorated with white ribbon and other decor as desired. Wedding cylinder is ready.

By analogy, you can sew decorations and for the bride, only take a white tissue and reduce all the details. How attached such a hat to the lid of the car? On magnets or suction cups glue better not to use For fastening. A white hat can be made a bride car - it will look beautiful and combine with the car of the groom.

Decoration of handles of cars in the wedding tavern

Doors are usually decorated Boutonniere But you can decorate the handles with bows or ribbons. Bows can be made by analogy with large bows, only using the cut of the appropriate fabric.

how beautiful to place cars on guests at the wedding yourself
Stock Foto Decoration of decorations of a wedding cortex

If the wedding is planned in the warm season, you can use live flowers in the decore. But it must be borne in mind that such decorations are short-lived. Therefore, artificial flowers are also quite suitable for the decor.

Video, how to make a decoration on a wedding machine with your own hands, you can see the link:

How beautiful to decorate the car guests at the wedding with your own hands?

Car guests are paid not to such close attention as a car of young, but this is not a reason to neglect their decoration. The main rules for the decor of the guest car - Style combination with all tuples and a combination of color. If contrasting decorations are perfectly looking at black or white models, then for bright colors you need to pick up the color gamut of the decor to make the decorations not lost on a bright background. For example, if the guest is a red car, then blue or yellow decorations are suitable for it.

Video master class on decoration on a wedding machine with your own hands:

As you understand, the options for the decor of the wedding car are a huge set! the main thing Decide with details And start doing everything in advance.

The idea of ​​the decoration of the wedding cortex is born after the style of the celebration is selected. Decoration on the car with your own hands on the wedding - the simplest and at the same time the most unusual way to create an original outfit for a wedding car, which can be done. Decorating the machines taken by flowers using both live plants and artificial.

Each composition is created taking into account the peculiarities of the bride and a suit of the groom, the general design of the holiday. To create a unique design of a wedding tier, satin ribbons and fatin, balls and more can be used. What exactly will choose newlyweds, depends on their personal preferences.

7 Popular Wedding Decor Options

Photo 1.Despite the fact that every wedding has many own differences, there are several options for designing a wedding cortex that are specially popular.

Master classes, which describe the decoration methods with the help of various materials, characterized by simplicity and accessibility are described.

Ribbons, fabric

Ribbons are the easiest and most affordable material for decorating cars, of which the wedding consignment is. To create such a decor you will need:

Photo 2.

  • Satin ribbons of different colors and shades;
  • Live or artificial flowers;
  • wire;
  • scissors;
  • Rhinestones and beads.

You can make ribbons from the fabric, dissolving the cloth on the strip of the desired width. But most newlyweds prefer to use ready-made satin ribbons, and the fabric is used for the manufacture of bows and other decorations.

The selected ribbons are attached to the door handles of the machine, bind under the hood and under the lid of the trunk.

Photo 3.Celebrating the wedding in the American style, fasten ribbons, decorated with bows and paper pomp, to the rear bumper of the car. You can disguise the mounting place with the help of individual colors or a whole garland made of alive or artificial plants.

Doing the decorations from the fabric you can use the air vessel or bright, with glossy glitter, atlas . The wizard will need a sewing machine to firmly and high-quality all the seams, bind separate parts. Beautifully looks great satin flower, similar to a real, or bow.

The design of satin ribbons or a whole web fabric is the fastest way to make a car of newlyweds unique.

Balloons

Photo 4.

The balls in the form of hearts, with congratulatory inscriptions, decorated with patterns and patterns, will become an excellent decoration for the wedding in Love style.

They can be fixed on the handles of the doors, tie a thin but sturdy reinforced thread to the antenna.

Balloons make up whole compositions or decorate the car with separate single balls, adding the composition with alive colors.

Rings

Rings are decorated with the machine of newlyweds on a long tradition, using ready-made decorative products or manufacturing them independently.

Photo 5.

You can arrange such an element of decor using:

  • satin ribbons;
  • special packaging paper;
  • adding small bells as an additional element;
  • Artificial or live flowers.

A large bouquet will help decorate the place of fixation on the roof of the car, but if you wish, or in accordance with the requirements of the stylistry, the base base can be decorated with fatin.

Hearts from ribbons or colors

The heart is a symbol of love, and without it can not do when decorating the wedding cortex. You can make a heart yourself, using:

Photo 6.

  • tapes;
  • textile;
  • Natural flowers;
  • Artificial plants.

It is important to choose the most suitable material for making hearts. Most often used steel wire, which allows the finished product for a long time to preserve the form. This decoration can be fixed both on the hood of the car and on its front bumper.

The heart made of colors can be decorated in the form of a circuit or completely filled with plants. In the first case, it is enough to bend the wire in the form of hearts, wrap it with green paper or cloth and fasten artificial flowers on it.

The second option requires the use of fabric. It can be a grid or well-stretched fatin. The canvas are cutting the frame and the flowers are fixed on its surface so that no emptiness remains.

Artificial flowers

Photo 7.Choosing a design for the car bride and groom, many stop on artificial colors. It is convenient and quite profitable.

This method of decoration guarantees long-term use - decorations made of artificial colors, not scary nature whims. Bouquets, garlands or hearts from plastic plants do not change the color, not withering, do not require special care.

Make such a decoration will help numerous photos, which are shown, how to properly and quickly arrange a car intended for newlyweds.

Considering the manufacture of decorations step by step, it is important first to determine where each element of the decor is fixed:

Photo 8.

  • Door handle auto;
  • front bumper;
  • rear bumper;
  • hood;
  • trunk.

From artificial flowers make garlands, for the manufacture of which you will need to make a frame of steel wire or cut the outline of the future decoration of durable cardboard (plywood).

A step-by-step process of making decor elements is that on the sheets of plywood paint the desired form of the future decoration. Then they drink with the help of a jigsaw along the contour and on the surface of the workpiece make holes with a drill and a thin drill.

In these holes insert the legs of artificial colors, bonding them between them from the back of the sheet.

Natural flowers

To dress the car of the bride and the bride with living flowers, you will need to choose plants that are capable of staying your initial freshness for a long period of time:

Photo 9.

  • roses;
  • carnations;
  • Calla;
  • dahlia.

In accordance with the selected theme of the wedding, you can decorate a car with wildflowers. This is not just a beautiful outfit for the car, but rather decor, underlining the style of the holiday, its feature. If the marriage is carried out outside the city in a rustic style, then the machine's newlyweds must be taken in field colors.

A bouquet or garland from the living colors is attached to the hood. For such design, a composition will require a composition in which each living flower in color, form and sizes corresponds to the rest of the plants.

It is impossible to allow some of them to get used before, and others later.

Doll and soft toys

Along with other mandatory attributes of the celebration of the doll on the hood of a wedding car - a long recognized traditional decoration, but today it is increasingly replaced by soft toys, sitting on the car hood.

Photo 10.

To give toys an appropriate look, you will need to sew your wedding outfits, put a dress on a doll, reminiscent of the outfit of the bride, decorate the heads with a hat and veils, surround the colors.

To secure the figurines on the car's hood, you will need to use ribbons or tissue, but some car brands allow you to make the fastening with metal fasteners directly to the radiator grille. Clothing, stitched for toys, becomes a similarity of the wedding dresses of young.

Squeeze on a hood doll or soft toys, add textiles or balloons, flowers or satin ribbons - the fastest way to make a car so that every guest can at first glance to determine the style of celebration.

How to decorate wedding machines with your own hands - step-by-step guide

Wedding rings are the most popular element of the car decor, in which they will go on the path of the bride and groom. You can make such an accessory alone using affordable materials. Enough to use:

Photo 11.

  • subtle rubber hose;
  • pair of metal lines, wooden sticks (pencils, thin rivers);
  • decorative ribbon, which decorate bouquets;
  • sturdy steel wire;
  • superclaim.

To dress the car bride and groom, you will need a small amount of artificial colors. With their help, you can disguise the place of connection of all components and fastening of the structure. First of all, it is necessary to determine the size of the future rings.

Calculate the length of the circle, you can use the rubber thin hose or quite durable wire with a large cross section.

It will be the base of the rings, one of which should be slightly more than the other in diameter.

Photo 12.

Slicing strips collect a circle. How its ends will be fastened, depends on the characteristics of the selected material. If the master works with the rubber hose, it will be enough will insert a stick in its middle, the surface of which is applied superclones.

Taking care that the rings were not damaged during the movement of the car and did not lose their shape, the durable wire is inserted into the middle of the hose and it is fastened (twisted) its ends.

Before the second ring is glued, it must be done first.

While the rings are glued, proceed to the preparation of the base for the entire design.

Photo 13.

To do this, you will need another ring of small diameter. Through its middle, the metal line is paved and firmly fixed with a superclone. At this stage, you can proceed to the decoration of finished rings.

To do this, you can use the Golden Paper Ribbon used when creating flower compositions. It neatly wind the rubber rings, giving them a finished look.

After gluing, artificial flowers can be prepared with which the base of the structure will be decorated. For this, products from fabric and plastic should be sipped.

It is enough to put the right flowers on the cover of the pan, in which water boils.

Photo 13.

Flower petals in their eyes take the right form and are now ready for further use. They are pre-lay on the base of the design with rings and, making sure that the composition turned out to be really successful, inserted to gluing.

Straightening petals and leaves to straighten, then dry. Now you can start assembling the decoration. The place of fastening the rings to the base decorate, laying the leaves and flowers so that it turns out a beautiful bouquet or garland.

First, the leaves are fixed, then the largest flowers, and only after that laid buds or other decorative elements.

This video will teach you to make rings on the car yourself:

The way of decorating a wedding car for newlyweds depends on the features of the holiday, the time of year, the general design of the celebration. Of course, it is important to do everything possible so that the elements selected for the decoration fit to the groom's outfits and the bride. It is primarily about the color scheme. American Wedding is a car decoration with various elements that are attached to the rear bumper of the machine. Therefore, paper or plastic pumps, artificial flowers can be used as a decor. But if we are talking about a classic European wedding, then you need to take care of the preparation of a large number of living colors and light textiles.

Добавить комментарий